24KV Recloser Vacuum Circuit Breaker
The 24KV breaker switch unit is comprised of three poles, the operating mechanism, and the operating mechanism housing. The sequence of the poles is A -B – C or 1 – 2 - 3 (sequence left to right when viewed from the lower terminal side of the recloser switch unit.
Each 24kv vacuum circuit breakerby GOPOWERis embedded in a solid-insulated pole made of weather-proof cyclo aliphatic epoxy resin. This enables a small design as well as resistance against environmental effects.
Breaker principle and design of 24KV Vacuum Circuit Breaker
ZW32 series 24KV circuit automatic recloserare used in distribution systems. 24kv vacuum circuit breakes are used to make and break normal and fault currents. Breakers are fully equipped with sensors and a controller to provide a means of protection and control. For more pole top switches at bulk price.
In case of a line fault, breakers can break and make currents several times, thus avoiding longer network interruptions due to temporary faults. The manufacture, design, and testing of the vacuum recloser is based on current standards IEC 62271-111：2019
Technical Parameters of 24KV Vacuum Circuit Breaker
|
Products Type |
ZW32-24 |
|
Maximum System Voltage |
24kV |
|
Rated Continuous Current |
630A |
|
Rated Frequency |
50/60Hz |
|
Short Time Withstand Current |
20kA/1sec |
|
Mainly Active Load Current |
630A |
|
Number of Load-break Operations |
30 |
|
Short-circuit Making Current (peak) |
50kA |
|
Number of Making Operations |
5 times |
|
Cable Charging Current |
25A |
|
Line Charging Current |
|
|
Closed Loop Circuit Current |
630A |
|
Transformer Magnetizing Current |
22A |
|
Wet Condition-10sec Ph- Ph-Eth, Across Interrupters |
50kV |
|
DryCondition-1min，Ph- Ph, Phase to Earth |
65kV |
|
Dry Condition - 1 min AcrossInterrupter |
79kV |
|
Phase to Phase, Phase to Earth |
125kV |
|
Across Interrupter |
145kV |
|
Internal Arc Test |
20kA /0.1 sec |
|
Arc Extinction Medium |
vacuum |
|
Insulation Medium |
vacuum |
|
Creepage Distance (Silicon) |
960mm |
|
Dry arcing distance |
200mm≥ |
|
IP Level |
67 |
|
Closing/Opening Time |
＜1sec |
|
Mechanical Operations (Guaranteed) |
10000times |
|
Operating Temperature (*Manual Type) |
-25～+70℃ |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
33KV SF6 Gas Load Break Switch | Application of 33KV SF6 Gas Load Breaker Switch The 33kv load break switchis made of a proven rugged, corrosion-resistant material (304L stainless... |
 |
Control Box-Feeder Terminal Unit | Control Box-Feeder Terminal Unit The feeder terminal unit(FTU) is a new HV switch control device of control cabinet enclosures equipped with both ... |
 |
Recloser Control Box-Feeder Terminal Unit | Recloser Control Box-Feeder Terminal Unit The feeder terminalunit(FTU) is a new HV switch control device of control cabinet enclosures equipped wi... |
 |
Centralized Type DTU | The centralized DTU adopts high-performance MCU processor, high-speed industrial network communication technology, multi-CPU integration technology... |
 |
33KV SF6 Gas Load Break Switch | These load break switch 33kvare intended for outdoor applications. They can be mounted either horizontally or vertically, and are suitable for elec... |
Похожие товары
 |
20(BYG1.8) Steppper motor stator and rotor core | Продавец: 855082 | 20(BYG1.8) Steppper motor stator and rotor core Yuma Precision provides high-performance 20(ByG1... |
 |
14(BYG1.8) Steppper motor stator and rotor core | Продавец: 855082 | 14(BYG1.8) Steppper motor stator and rotor core 14(BYG1.8) Stepper Motor Stator and Rotor Core ... |
 |
Frameless Motor Core | Продавец: 855082 | Frameless Motor Core Yuma Precision offers cutting-edge frameless motor cores, designed for indu... |
 |
Permanent Magnet Motor Core | Продавец: 855082 | Permanent Magnet Motor Core Permanent Magnet Motor Core- High-Efficiency Motor Solutions Yuma P... |
 |
Linear Motor Core | Продавец: 855082 | Linear Motor Core Yuma Precisionspecializes in manufacturing high-quality Linear Motor Coresdesi... |
