Explosion Proof Receptacle

Products Show for Explosion Proof Receptacle

Plug-in receptacle to provide power directly to electrical device for

portable and turnaround plants in hazardous and corrosive areas.

Explosion proof receptacle, also called explosion proof receptacles, explosion proof socket, explosion proof plug and socket, flame proof socket, class 1 div 2 receptacle, explosion proof connectors, explosion proof switches and sockets, explosion proof plug, atex sockets, atex plug, flame proof industrial socket, explosion proof industrial sockets, ex sockets, explosion proof 13a switch socket outlet, explosion proof outlet, explosion proof electrical outlets, class 1 division 2 receptacle, power plug explosion proof, flameproof plug socket, explosion proof socket outlet, flameproof plug and socket, dust proof electrical outlets, explosion proof outlet box, explosion proof conduit outlet box, explosion proof receptacle box, class 1 div 1 receptacle.

Designed with a confined recessed contacts by flame proof aluminum housing or increased safety plastic housing, explosion proof receptacle are used to contact the electrical power for stationary or portable electrically operated devices such as explosion proof lighting, explosion proof motor, explosion proof air conditioners and other appliances in harsh and hazardous location. No matter connecting single phase loads or three-phase loads, the electrical contact will be deeply hidden and limited without touching directly with explosive gas or dust to avoid any arcing or sparks to stop the explosion happening. For some, you can install those explosion proof receptacle in an enclosed explosion proof enclosure or explosion proof panel for convenient plug-in connection through free-standing or surface mounted bracket.

Category

Explosion Proof Receptacle

Explosion Proof Receptacle Explosion Proof Socket and Plug SSP-P Series

C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

＜125A

Type 4X, IP66

Explosion Proof Receptacle Explosion Proof Socket and Plug SSP-P Series

Explosion Proof Receptacle Flame Proof Socket and Plug SSP-A Series

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

＜125A

Type 4X, IP66

Explosion Proof Receptacle Flame Proof Socket and Plug SSP-A Series

Features

Explosion Proof Receptacle

Die cast Aluminum alloy flame proof Ex d housing

Glass reinforced plastic increased safety housing

Current rating for 16A, 32A, 63A, 125A

Grounding through extra PE pole for safety enhancing

Pole option 2P, 2P+PE, 1P+N+PE, 3P+PE, 3P+N+PE

Designated interlock function for socket and plug

Wide voltage input up to 690V AC

Wide ambient temperature range from -40℃ - +55℃

IP66 ingress protection, NEMA 4X

Class 1 Div 1, Class 1 Div 2, Class 2 Division 1, Class 2 Division 1

Group A, B, C, D, Group C, D, IIB, IIC

Zone 1, Zone 2, Zone 21, Zone 22

Main Usage

Explosion Proof Receptacle

Explosion proof receptacle can be applied for many usages, now we are listing the main usage directions from four aspects, function, hazard class division, usage by application and alternative for brand-new models.

Function

To be available plug-in power on device, explosion proof receptacle connect the contact of electricity to any load with plugs under the explosion protected condition closely for lighting and especially for three phase high voltage devices.

Hazard class division

You know there are different classifications and divisions for explosion proof receptacle, hazard class division can be class 1 div 1 and class div 2, group A, B, C, D, zone 1 and zone 2, IIC, you can check the hazardous area classifications chart from other pages.

Usage by application

Depends on the application field, explosion proof enclosure can be used in refinery plants, petroleum plants, chemical plants, metal processing plant, mining plants, waste water plants and anywhere flammable gas, vapor, mist and dust present.

Alternative for brand-new model

SUREALL explosion proof receptacle is the alternative solution for atex sockets, atex plug, ccp socket, srd full form, eprc receptacle, spy plug, krajc socket, powergard receptacle, class 1 div 1 receptacle, class 1 div 2 receptacle, hazardous area plugs.

How do Explosion Proof Outlets Work?

Explosion proof outlets, also called explosion proof receptacle, is a plug-in receptacle to connect and disconnect the power for electrical apparatus through enclosed and physical contacting with explosion proof plug, Thus, through isolating the electrical contacts parts in a flame proof housing or increased safety housing to limit the explosion transferring to outside of housing, explosion proof outlets prevent the spark or explosion from forming regardless of presenting flammable gas, vapor or dust.

Note: AL means aluminum alloy, GRP means glass reinforced plastic.

SUREALL explosion proof receptacle can be used in gas group A, B, C, D and gas group IIC, current rates from 16A, 32A, 63A up to 125A, SSP-P series explosion proof receptacle is made of glass reinforced plastic, SSP-A series explosion proof receptacle is made of aluminum alloy.

FAQs about Explosion Proof Receptacle

Q

What is explosion proof socket?

A

SUREALL Explosion proof socket SSP-A series is designed with explosive protected housing containing the formed explosion within the housing to prevent the heat from entering into the surrounding environment, normally it works as the connection to power for electrical device with explosion proof plug together.

Q

What causes a plug socket to explode?

A

Inside both the ends of the explosion proof socket and plug, it consists of several poles electrical contacts, after toughing all contacts, the over-current and short-circuit may produce spark, heat or fire in some case, if there is flammable gas or dust around the contacts, the contacts part can explode probably. Explosion proof plug and socket will not transfer the explosion to damage the ambient location.

FAQs about Explosion Proof Receptacle

Explosion Proof Receptacle FAQs

Q

What is a factory sealed receptacle?

A

SUREALL explosion proof receptacle SSP-P series is glass reinforced plastic housing treated by increased safety technology, in order to stop the external gas or dust coming into the housing, the receptacle housing should be factory sealed with tight sealing crack through high quality sealing washer.

Q

What is ATEX electrical equipment?

A

ATEX electrical equipment is ATEX certified explosion proof electrical equipment in the electrical control system including ATEX explosion proof lighting, ATEX explosion proof switch, ATEX explosion proof junction box, ATEX explosion proof panel and ATEX explosion proof receptacle, ATEX is the most common recognized certificate of European explosion proof standard.

Q

Are metal plug sockets safe?

A

Yes, metal plug sockets are safe. The metal material of explosion proof socket and plug is not the electrical conductor directly, but is only the protective enclosure to accommodate the electrical conductor and insulation support, thus the metal plug sockets will be conduct electricity to be dangerous. Moreover, the protective enclosure can pass the heat from inside the housing to outside the housing to enhance the safety.

As a reliable explosion proof lamp factory, we will do our best to meet all the needs of customers.

Другие товары поставщика

	Explosion Proof Led Flood Light Class 1 Div 1 Zone 1 SHF-I Series Advantages	Class I Division 1,Group A,B,C,D Zone 1,Zone 2 Class II Division 1,Group E,F,G Zone 21, Zone 22 Class III -40℃ ~ +55℃ Ex d IIB T6...
	Explosion Proof Connector Class 1 Div 2 Liquid Tight Connectors SL Series	Explosion Proof Connector Class 1 Div 2 Liquid Tight ConnectorsSL Series Advantages Class I Division 2,Group A,B,C,D Zone 1, Zone 2 Class II...
	Explosion Proof Receptacle Explosion Proof Socket and Plug SSP-P Series	Flame Proof SocketExplosion Proof Switches And Atex SocketsFlame Proof Socket Explosion Proof Receptacle Explosion Proof Socket and Plug SSP-P S...
	Explosion Proof Flood Light	Products Show for Explosion Proof Flood Lighting High lumens output led flood lights and spotlight to provide illumination for large areas in ha...
	Explosion Proof Led Emergency Exit Sign Lights SES Series Advantages	Class I, Division 1, Groups C, D Ex tD A21 T80℃ Db IP66 Class I, Division 2, Groups A, B, C, D Zone 1, Zone 2 Class II, Division 1, Gro...

Все товары поставщика

Похожие товары

	T11A LED Road Lighting	Продавец: Hangzhou Hpwinner Opto Corporation	T11A LED Road Lighting The wattage range of T11ALED road lighting 40W -420W T11A street light...
	Side-entry & Post-top LED Roadway Light	Продавец: Hangzhou Hpwinner Opto Corporation	Side-entry & Post-top LED Roadway Light HPWINNER side-entry & post-top LED roadway light...
	Side-entry LED Road Light	Продавец: Hangzhou Hpwinner Opto Corporation	Side-entry LED Road Light HPWINNER side-entry LED road Lights are designed for the poles with ar...
	M6A-VC LED Module	Продавец: Hangzhou Hpwinner Opto Corporation	M6A-VC LED Module The wattage range of M6A-XC IP68 LEDMini Module20W/25W/30W As one of the el...
	LED Grow Light	Продавец: XIAMEN TOPSTAR LIGHTING CO.,LTD	Since LED lights appeared on the marketing, LED grow lightsare becoming popular day by day. As a ...