Трубчатый ороситель PP Tube Settler
produced by our company uses PP, . It was hot-drawn into a hexagonal tube shape by infrared thermal machine and then welded into the using shape with patented technology and high frequency.
Our inclined tube settler can be applied to many kinds of precipitation and sand removing. In decades, is the most mature water treatment device that widely used in drainage projects. With the advantages of wide application range, high treatment efficiency and small occupation area, it can be used in water inlet degritting, industrial and living water sedimentation, sewage sedimentation, grease and tailing enrichment processing and so on. not only can be applied to new construction project but also the transformation of existing old tank and you can achieve astounding economic benefit in both occasions.
Tube settlers increase the settling capacity of circular clarifiers and/or rectangular sedimentation basins by reducing the vertical distance. The floc particles would settle before agglomerating to form larger particles. The settlers use multiple tubular channels sloped at an angle of 60° and adjacent to each other, which combine to form an increased effective settling area. This provides for a particle settling depth that is significantly less than the settling depth of a conventional clarifier, reducing settling times. Tube settlers capture the settleable fine floc that escapes the clarification zone beneath the tube settlers and allows the larger floc to travel to the tank bottom in a more settleable form. The settler's channel collects solids into a compact mass which promotes the solids to slide down the tube channel.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Membrane tube diffuser | Membrane tube diffuserThe membrane tube diffuser is a new type of oxygenation aerator and the core equipment of A/O process (activated sludge bioch... |
 |
Cooling Tower Filler: CF1000-HT | Cooling Tower Filler: CF1000-HT Width: 800mm or 1000mm Length: as your request Thickness: from 0.28mm to 0.45mm Profile height: 20mm Material:... |
 |
Cooling Tower Filler: CF750-KU | Cooling Tower Filler: CF750-KU Width: 730mm, 750mm, 950mm, 980mm Length: as your request Thickness: from 0.28mm to 0.45mm Profile height: 20mm ... |
 |
впускные жалюзи для воздуха Air Inlet Louver | Air Inlet Louver improve air flow into the cooling tower, prevent debris from entering, eliminate water splash-out (which can cause icing, near-si... |
 |
PP Cooling Tower Filler: VF610-LC | PP Cooling Tower Filler: VF610-LC Width: 305mm or 610mm Length: as your request Thickness: from 0.3mm to 0.45mm Profile height: 19mm Material:... |
Похожие товары
 |
HaiPick System Boosts Micro-fulfillment Centers in Europe for Faster Online Orders | Продавец: HAI ROBOTICS | The fastest and most efficient way to fulfill online orders has become a top supply chain priorit... |
 |
50mm DC Axial Cooling Fan | Продавец: Shenzhen Xiehengda Electronics Co.,Ltd. | 50mm DC axial cooling fans are a type of fan with a 50mm diameter, which makes them ideal for sma... |
 |
40mm DC Axial Cooling Fan | Продавец: Shenzhen Xiehengda Electronics Co.,Ltd. | 40mm DC axial cooling fans are a type of fan with a 40mm diameter that are commonly used in elect... |
 |
30mm DC Axial Cooling Fan | Продавец: Shenzhen Xiehengda Electronics Co.,Ltd. | 30mm DC axial cooling fans are a type of axial fan with a diameter of 30mm. The cooling-fan Manuf... |
 |
200mm DC Fan | Продавец: Shenzhen Xiehengda Electronics Co.,Ltd. | A 200mm DC Fanis a type of large-sized fan with a diameter of 200mm, commonly used in large-scale... |
