Auto Relays

• 

Auto off relay control higher voltages or currents by using lower voltages or currents. When a certain voltage or current is applied to both ends of the electromagnetic relay coil, the magnetic flux generated by the coil passes through the magnetic circuit composed of the iron core, the yoke, the armature and the working air gap of the magnetic circuit. Under the action of the magnetic field, the armature is attracted to the pole face of the iron core. Therefore, the normally closed contact of the contact is pushed to be disconnected, and the normally open contact is closed. When the voltage or current at both ends of the coil is less than a certain value, and the mechanical reaction force is greater than the electromagnetic attraction force, the armature will return to the initial state, the normally open contact is disconnected and normally closed contact is on.

Key Features of Auto Relays

With charatstic of high switching load power, high shock and vibration resistance.

Power 12V.

Power consumption 1.6～2W.

Ambient temperature -40℃～125℃.

How To Test Auto Relays?

(1) A simple method for judging the working performance of the auto relays.

Turn on the ignition auto relay switch, and then use your ear or stethoscope to listen to the sound of the control relay, or feel the vibration of the relay with your hand. If there is vibration, then the auto relays is working well, the electrical appliance does not work due to other reasons. Otherwise, the relay is not working properly.

You can also unplug the auto recloser relayfor testing, for example, if the air conditioner compressor does not work, you can start the engine, turn on the blower switch and the air conditioner switch. Then unplug the connector of the air conditioner compressor relay to judge. If the sound of the relay action can be heard, the engine speed drops significantly when the relay is unplugged, and the engine speed rises when the auto relays is inserted, it means that the air conditioner compressor relay and its control circuit are normal.

(2) Common failures of relays.

Common failure phenomena of relays include coil burnout, inter-turn short circuit or insulation aging, contact ablation, thermal decay, and inability to adjust the initial operating current.

①The relay coil is burnt out. In order to prevent this from happening, if the temperature may exceed 80°C during repair, maintenance and electric welding, the temperature-sensitive relays and electronic control units should be removed.

② Contact ablation. For example, vehicle with 491Q-ME engine, the relay of the air conditioner condenser fan is just below the glass cleaning spray pipe. If the spray pipe is broken, the cleaning fluid will leak to the relay, making the relay normally open contact is corroded and cannot be disconnected, which will lead to the failure of the air conditioner condenser fan to keep running. Therefore, water should be strictly prevented from entering the relay.

(3) Try to reduce the contact resistance of the relay contact.

The contact resistance existing between the contacts of the automotive relay is mainly composed of shrinkage resistance and surface film resistance. The contact resistance of the contact is related to the contact form, material properties and surface processing of the contact. It can be seen that to reduce the contact resistance of the relay contacts, under the condition of a certain contact pressure, it can be started by improving the contact state and improving the contact material.

(4) Poor grounding of the ECU may affect the normal operation of the relay.

Now the price of auto spares saleis reasonable, if you have needs, please contact us.

Другие товары поставщика

	Ignition Coil Rubber Boots	MAPMS supplies car rubber boots for COP and pencil ignition coils, which is made of high-quality silicone, and with withstand high pressure over 40...
	Cabin Filters Application	automotive parts industry/ automobile parts manufacturing industry/ industry auto parts The cabin filter filters the air in the car compartmen...
	Starter Motor	The vehicle starter can convert the electrical energy of the battery into mechanical energy and drive the engine flywheel to rotate to start the en...
	Starting System in Automobile	Starting System in Automobile Therefore, the whole process from when the crankshaft starts to rotate under the action of external force to when the...
	Auto Car Thermal Expansion Valves	The auto ac expansion valve of the automotive air conditioner is installed at the entrance of the evaporator, and has two main functions. Throttle...

Похожие товары

	How to Create an Efficient Warehouse Returns Process?	Продавец: HAI ROBOTICS	Hai Robotics is committed to helping customers achieve an efficient return process in warehouse. ...
	Automated Liquid Handling	Продавец: Raykol Group(XiaMen)Corp.,Ltd.	RayKol robotic liquid handling systemcombines high perfomance and speed. Errors at pipetting the ...
	Fuel Filters Application	Продавец: Guangzhou May Import & Export Trading Co.,Ltd	The fuel filterfilters the fuel required for the combustion of the engine cylinder, prevents dust...
	Crankshaft Position Sensors Application	Продавец: Guangzhou May Import & Export Trading Co.,Ltd	The crankshaft position sensor togethers with the camshaft position sensor to determine the ignit...
	Camshaft Position Sensor Application	Продавец: Guangzhou May Import & Export Trading Co.,Ltd	The cam valve sensorcollects the position signal of the valve camshaft and inputs it to the ECU, ...