Ленточный резак для автоматического удаления отходов smt reel

• 

Product introduction:

This equipment is used for smt tape cutting, which in the chip mounter tape recycling place ;

The chip mounter usually has no function of tape recycling, the waste tapes are treated as garbage collection, and manually cut with scissors;

SMT automatic tape cutting machine is completely replace the manual cutting tape, the cutting function of material belt and film is realized ; The cutting tapes is recycled to the automatic tape cutting machine.

The cutted tapes and films falling in the SMT material recycling drawer of the tape cutting machine, Convenient staff finally concentrated treatment. Not only give employees a good working environment, and also can better demonstrate a good 5S management ability (there are examples in their customers to visit, to their production line 5S praise, especially at the SMT lines).

The machine features:

1.This model of smt automatic tape cutting machine is suitable for SMT with a variety of materials, from the thick 0.05mm film to the 1.5mm band can be easily cut;;

2.Patent (patent number ZL.6)equipment beautiful, small footprint, Conviniently to use and storage.

The specific size can according to the customer the feeder under custom recovery area.

3. The blade material: imported SKD-11, guaranteed for one year without sharpening.

4.The patent (Patent No. ZL.4) rolling cutter cutting system, When cutting on the cutter bottom eight spring tension in the cutter edge plane and tangent point contact. To solve the shortcomings of the common market under the knife to cut the blade wear faster, where our shear belt machine warranty for two years (including blade), four knife can be turned to use, can be repeatedly grinding cutter. At the same time, it completely solves the phenomenon that the traditional belt shears use the knife blade to cut back and forth frequently.

5. Microcomputer intelligent control, cutting time and length can be set. One button start / stop, easy to operate.

6. With waste recycling safety sensor, when the material box off the device to stop working automatically, It can prevent employees from hand from the bottom of the device tool work area to ensure the safety of equipment. Ensure the pure shearing after all fall into the recovery box at the same time.

7. The machine shear stroke two ends limit limit switch, beyond the trip power outage. To prevent the photoelectric switch failure after the tool out of the limit motor has been working, burned motor caused short circuit situation.

8. The machine warranty for one year, permanent after-sales service.

Другие товары поставщика

	74/5000 SMT оборудование для смешивания припоя для пайки Mix паяльная машина	Product introduction: 1.Usingprecisionguiderailandtheimportmotortodrivethebladeseatconversion,printing,andhighaccuracy. 2.Printingscrapercanrotat...
	Factory Price SMT vacuum Lead Free Hot Air Reflow oven for smt assembly line	HRM-630/440 Бессвинцовая печь для оплавления Обтекаемый дизайн формы делает печь выглядит великолепно. Сенсорный экран и система управления ПЛК....
	Полуавтоматический SMT принтер для экрана размером 1200 печатных плат в smt светодиодной производственной линии	Product introduction: 1.Usingprecisionguiderailandtheimportmotortodrivethebladeseatconversion,printing,andhighaccuracy. 2.Printingscrapercanrotat...
	SMT машина PCB Depanelizer многолезвийный автомат для резки печатной платы	SMTmachine PCB cutting machine multi blade cutting machine Features:1.It can cut many boards with multiple sets of knives work at the same time....
	Китай производитель pcb vcut машина pcb резки оборудование для печатных плат резки	Product introduction: 1.ThenetherlinearbladeisusedtofixthePCBV-cut,theuppercircularblademovestosepar- atethePCB.Bypressingthefoot-pedaltocontrolt...

Похожие товары

	Pakistan-	Продавец: Хэнань Тяньчжидао Биотехнология Лтд.	In the fields of biological sample storage, medical cold chain transportation, and laboratory res...
	Sampling Line	Продавец: Qinhuangdao Kapunuomaite Medical Equipment S&T Co.,Ltd.	Medical tubing that connects a patient to monitoring devices. In anesthesia, it collects exhaled ...
	CNC MACHINING FOR SPECIAL MATERIALS	Продавец: shenzhen richconn technology co.,ltd	Composite processing technology will have many processes, and good products can be made only by r...
	OEM CNC MACHINING SERVICES FROM RICHCONN	Продавец: shenzhen richconn technology co.,ltd	Richconn continues to improve and expand in online CNC machining and manufacturing. CNC Machin...
	ELECTRONICS CNC MACHINING	Продавец: shenzhen richconn technology co.,ltd	ELECTRONICS CNC MACHINING Our purpose is to provide customers with processing services of variou...