Автоматическая печатная машина smt цена машины оплавления духовка машина оплавления духовка 8 температурная зона
Automatic pcb machine smt machine price reflow oven machine reflow oven 8 temperature zone
Features:
1.PC and PLC for controlling systemprovide a stable system. It can stock numerous parameters like sprayer moving speed, preheat temperatures, solder pot temperatures, conveyor speed etc. Also it can set different levels of the operators and prevent miss-operations, and the records of alarm will be recorded too. .
2.Brand electrical componentlikeSchneider (German)breaker,Omron (Japan)box breaker. Meanwhile theCE certificated bloweris specially design for lead-free reflow oven. It runs stable and lower noise.
3.Upper zone and hood can beopened by the2electrical screwautomatically. It is very convenient for cleaning and maintenance.
4.Specially designedNi-Cr heater filaments, provide a very quick ramp up time. It takes just15 minutesfrom ambient to setting temperature.
5.The inner tunnel of the oven ismade ofstainless steelwhich easy for cleans.
6.The entire upper and bottom zones areforced air convection; provide great temperature accuracy and uniform.
7.Stainless steelmesh belt and chain conveyorwork together.
8.Outsideindustrial chillerprovides better cooling performance.
9.It optional forCenter board supportfor wide and soft PCB.
10.It optional forDual rail systemfor 2 narrow PCB to transport in parallel.
11.It's equipped withFlux management systemwhich will reduce maintenance of machine.
|
Machine |
HRM-840 |
HRF-10C |
|
Heating zones |
upper 8 zones |
upper 10 zones |
|
bottom 8 zones |
bottom 10 zones |
|
|
Heating tunnel |
2900mm |
3600mm |
|
Dimension |
L5040*1430*1450 |
L5800*1430*1450 |
|
Net weight |
about 1700Kg |
about 1900Kg |
|
General power |
64KW |
75KW |
|
Power consumption |
Approx.7--15KW |
Approx.9--19KW |
|
Rising time |
15 minutes |
18 minutes |
|
Controlling type |
PC + PLC controlling |
|
|
Heating method |
Fully forced air convection |
|
|
Temperature controlling |
PID close-loop control, SSR drive |
|
|
Temperature range |
Ambient---350℃ |
|
|
Temperature accurancy |
±1 ℃ |
|
|
Temperature uniform |
±2 ℃ |
|
|
Cooling |
onecooling zones, industrial chiller outside |
|
|
Conveyor method |
Mesh belt and chain conveyor |
|
|
Conveyor height |
900±20mm |
|
|
Mesh belt width |
500mm |
|
|
Max PCB width |
450mm |
|
|
Width adjustment |
Electrical switch |
|
|
PCB clearance |
30mm |
|
|
Conveyor direction |
Left to right |
|
|
Conveyor speed |
0-1300mm/min |
|
|
Hook lift |
Electrical screw pole |
|
|
Power supply |
380v,3ph,50hz |
|
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Разделитель доски Pcb вел автомат для резки разделителя алюминия pcb руководства v отрезанный | Pcb board separator v cut pcb aluminium separator features: 1.Decrease the stress , invoide the welding pot break. 2.Adjust the up guide sli... |
 |
SMT Samsung SMN 8 мм фидер CP40 CP45 CP60 12мм фидер | Desc:SM8 12 16mm Feeder Compatibility: Samsung SM series Machine Condition: Fresh New or second-hand Stock: Original New and second-hand origina... |
 |
Заводская цена SMT Селективная паяльная машина для SMT производственной линии | Features: 1.The machine integrates flux spraying,preheating and soldering. 2.The solder pot is fixed, and the PCB board moves to realize solder... |
 |
SMT автоматический поворотный станок на 90 градусов PCB поворотный конвейер | Product introduction: 1.PLC control system, Working is stably and reliably; 2.Enclosed designensure the highest security level; 3.Balanced, stab... |
 |
Машина для загрузки печатных плат загрузчика доски PCB Destacker PCB машины SMT автоматическая | Product introduction: 1.This unit is used to send bare PCBs into SMT production line 2.Stable and reliablePLC control system; 3.Easy to operateL... |
Похожие товары
 |
Pakistan- | Продавец: Хэнань Тяньчжидао Биотехнология Лтд. | In the fields of biological sample storage, medical cold chain transportation, and laboratory res... |
 |
Sampling Line | Продавец: Qinhuangdao Kapunuomaite Medical Equipment S&T Co.,Ltd. | Medical tubing that connects a patient to monitoring devices. In anesthesia, it collects exhaled ... |
 |
CNC MACHINING FOR SPECIAL MATERIALS | Продавец: shenzhen richconn technology co.,ltd | Composite processing technology will have many processes, and good products can be made only by r... |
 |
OEM CNC MACHINING SERVICES FROM RICHCONN | Продавец: shenzhen richconn technology co.,ltd | Richconn continues to improve and expand in online CNC machining and manufacturing. CNC Machin... |
 |
ELECTRONICS CNC MACHINING | Продавец: shenzhen richconn technology co.,ltd | ELECTRONICS CNC MACHINING Our purpose is to provide customers with processing services of variou... |
