Automatic pcb machine smt machine price reflow oven machine reflow oven 8 temperature zone
Automatic pcb machine smt machine price reflow oven machine reflow oven 8 temperature zone
Features:
1.PC and PLC for controlling systemprovide a stable system. It can stock numerous parameters like sprayer moving speed, preheat temperatures, solder pot temperatures, conveyor speed etc. Also it can set different levels of the operators and prevent miss-operations, and the records of alarm will be recorded too. .
2.Brand electrical componentlikeSchneider (German)breaker,Omron (Japan)box breaker. Meanwhile theCE certificated bloweris specially design for lead-free reflow oven. It runs stable and lower noise.
3.Upper zone and hood can beopened by the2electrical screwautomatically. It is very convenient for cleaning and maintenance.
4.Specially designedNi-Cr heater filaments, provide a very quick ramp up time. It takes just15 minutesfrom ambient to setting temperature.
5.The inner tunnel of the oven ismade ofstainless steelwhich easy for cleans.
6.The entire upper and bottom zones areforced air convection; provide great temperature accuracy and uniform.
7.Stainless steelmesh belt and chain conveyorwork together.
8.Outsideindustrial chillerprovides better cooling performance.
9.It optional forCenter board supportfor wide and soft PCB.
10.It optional forDual rail systemfor 2 narrow PCB to transport in parallel.
11.It's equipped withFlux management systemwhich will reduce maintenance of machine.
|
Machine |
HRM-840 |
HRF-10C |
|
Heating zones |
upper 8 zones |
upper 10 zones |
|
bottom 8 zones |
bottom 10 zones |
|
|
Heating tunnel |
2900mm |
3600mm |
|
Dimension |
L5040*1430*1450 |
L5800*1430*1450 |
|
Net weight |
about 1700Kg |
about 1900Kg |
|
General power |
64KW |
75KW |
|
Power consumption |
Approx.7--15KW |
Approx.9--19KW |
|
Rising time |
15 minutes |
18 minutes |
|
Controlling type |
PC + PLC controlling |
|
|
Heating method |
Fully forced air convection |
|
|
Temperature controlling |
PID close-loop control, SSR drive |
|
|
Temperature range |
Ambient---350℃ |
|
|
Temperature accurancy |
±1 ℃ |
|
|
Temperature uniform |
±2 ℃ |
|
|
Cooling |
onecooling zones, industrial chiller outside |
|
|
Conveyor method |
Mesh belt and chain conveyor |
|
|
Conveyor height |
900±20mm |
|
|
Mesh belt width |
500mm |
|
|
Max PCB width |
450mm |
|
|
Width adjustment |
Electrical switch |
|
|
PCB clearance |
30mm |
|
|
Conveyor direction |
Left to right |
|
|
Conveyor speed |
0-1300mm/min |
|
|
Hook lift |
Electrical screw pole |
|
|
Power supply |
380v,3ph,50hz |
|
在线联系供应商
Other supplier products
 |
SMT PCB Automatic multi-function buffer Dual track multi function buffer conveyor with CE certification | Product introduction: 1.This equipment is placed after production line printer or before and after the equipments of different working Speed as a... |
 |
Factory Price SMT vacuum Lead Free Hot Air Reflow oven for smt assembly line | HRM-630/440 Lead Free Reflow Oven Features : Streamline shape design make the oven looks great. Touch screen andPLC controllingsystem .It cans... |
 |
Factory price SMT Selective Wave Soldering Machine for SMT production line | Features: 1.The machine integrates flux spraying,preheating and soldering. 2.The solder pot is fixed, and the PCB board moves to realize solder... |
 |
Automatic waste carrier tape cutter smt reel tape cutting machine scrap tape cutter smt belt cutting machine | Product introduction: This equipment is used for smt tape cutting, which in the chip mounter tape recycling place ; The chip mounter usually has ... |
 |
SMT solder dross recovery system solder waste recycling separator online automatic solder dross separator | SMT solder dross recovery system solder waste recycling separator online automatic solder dross separator HR-SD100 is an endeavor in reverting and... |
Same products
 |
Pakistan- | 卖方: 河南天之道生物科技有限公司 | In the fields of biological sample storage, medical cold chain transportation, and laboratory res... |
 |
Sampling Line | 卖方: Qinhuangdao Kapunuomaite Medical Equipment S&T Co.,Ltd. | Medical tubing that connects a patient to monitoring devices. In anesthesia, it collects exhaled ... |
 |
CNC MACHINING FOR SPECIAL MATERIALS | 卖方: shenzhen richconn technology co.,ltd | Composite processing technology will have many processes, and good products can be made only by r... |
 |
OEM CNC MACHINING SERVICES FROM RICHCONN | 卖方: shenzhen richconn technology co.,ltd | Richconn continues to improve and expand in online CNC machining and manufacturing. CNC Machin... |
 |
ELECTRONICS CNC MACHINING | 卖方: shenzhen richconn technology co.,ltd | ELECTRONICS CNC MACHINING Our purpose is to provide customers with processing services of variou... |
