Oil Country Lathe
1. Manual Oil Country Lathe Q-225Features:● The oil country lathes are used for turning pipe threads,Website:, inside and outside.● They can be used to make external circles, holes and end surfaces of shafts or discs as general machine tools.● Massive headstock with precision spindle running in tapered roller bearings, 2 lathe chuck mounts on both sides● High torque at the working spindle ensures high chip removal rates when machining parts with large diameters.● Heavy machine bed made of premium cast-iron with hardened and ground guideways.● Central, practical controls for feeds and thread leads.● Wide spectrum of inch and metric threads.● Gears are hardened and ground.● Heavy-duty 4-station tool holder.● Coolant system is included.Standard Configuration:4 - jaw independent chuck, 2 sets Taper turning device, 1 setOut board support, 1 pieceManual moving tailstockChuck & tool post guardCoolant system, Halogen lightMaintenance tool & tool boxOperation manual in English Specification Q-130 Q-200 Q-225 Max. swing dia. over bedΦ630mmΦ630mmΦ630mm Max. swing dia. over carriageΦ340mmΦ340mmΦ340mm Distance between two centers1500, 3000mm Width of bed490mm490mm490mm Diameter of spindle inner holeΦ130mmΦ200mmΦ225mm Max. Clamped pipe diameterΦ30~126mmΦ50~193mmΦ50~220mm Step of spindle speed18 steps12 steps12 steps Range of spindle speed12~642r.p.m24~300r.p.m20~460r.p.m No. of Metric thread and range52 kinds, 1~24mm24 kinds, 1~14mm21 kinds, 1~15mm No. of Inch thread and range40kinds, 2~28T.P.I40kinds, 2~28T.P.I26kinds, 1~14T.P.I Kind of Longitudinal Feed26kinds, 0.07 ~1.33mm32kinds, 0.1~1.46mm Kind of Cross Feed and range22kinds, 0.02~0.45mm 32kinds, 0.04~0.65 Tool section ( H×W )30×30mm30×30mm30×30mm Diameter of tailstock sleeveΦ100mmΦ100mmΦ100mm Travel of tailstock sleeve205mmmm205mmmm250mm Taper of tailstock sleeveMorse No. 5Morse No. 5Morse No. 5 Main motor power7.5kw7.5kw11kw Overall size ( L x W x H)(3657, 5157) × 1449 × 1393mm Weight4260, 5110kg4440, 5290kg4500, 5350kg2. Manual Oil Country Lathe Q-280SStandard Accessories:• 4 - Jaw chuck Φ720mm, 2 sets • Follow rest 50 to 220mm, 1 set• Steady rest 50 to 470mm, 1 set• Taper turning device, 1 set• Out board support, 1 piece• Manual moving tailstock• Dead center, 1 piece• Living center, 1 piece• Coolant system• Working light• Special toolsOptions & Extra cost:• 2 axis digital indicator• Electric moving tailstockModel Unit Q-280 Diameter of Spindle boremmΦ 280 Max. swing over bedmmΦ 1000 Max. swing over cross slidemmΦ 720 Max. distance between two centersmm1500/2000/3000/4000/5000/6000 Max. turning lengthmm1300/1800/2800/3800/4800/5800 Max. load capacity between two centerston4 Width of bedmm600 Spindle speed ranger.p.m5~435 (stepless) Chuck diametermm Φ 720, 4-Jaw Longitudinal feed rangemm/r64 kinds, 0.18-9.6 Cross feed rangemm/r64 kinds, 0.04-4.8 No. and range of Metric threadmm56 kinds, 1~120 No. and range of Inch threadT.P.I56 kinds, 30~1/4 No. and range of Module threadmm56 kinds, 0.5-60 No. and range of Pitch threadD.P46 kinds, 0.5-60 Tool post station-Vertical 4-station Section of tool shankmm32×32 Tool post swing angle°±90° Max. travel of top slidemm200 Max. travel of cross slidemm600 Tailstock sleeve diametermmΦ 120 Tailstock sleeve taper-Morse No.6 Tailstock sleeve Travelmm250 Main motor powerkwA.C 18.5 (Inverter) Rapid Motor powerkw1.1 Coolant pumpkw0.153. Manual Oil Country Lathe Q-360SStandard Configuration:Independent 4 jaws front and rear chuck , 2 sets; Steady rest, range 50 to 590mm, 1 set ; Follow rest, range 50 to 220mm, 1 set; Taper turning device with length 300mm, 1 set; Out board support, 1 piece; Dead center, 1 piece; Living center, 1 set; Coolant system; Work light; Special tools; Electrical tailstock, Operation manual.Specification Unit Q-360 Diameter of Spindle boremmΦ 360Max. swing over bedmmΦ 1000Max. swing over tool postmmΦ 640Max. workpiece length between centersmm1500/3000Max. turning lengthmm1300/2800Max. load capacity between two centerskg6000Width of bedmm755Spindle speed stepstep8Spindle speed ranger.p.m6.3~315Power of main powerkwAC 22Number and range of Metric threadmm44 kinds, 1~120Number and range of Inch threadT.P.I37 kinds, 30~11/8Number and range of Module threadmm46 kinds, 0.5-60Number and range of Pitch threadD.P46 kinds, 0.5-60Tool post station-Vertical 4-stationTool sectionmm45×45Diameter of Tailstock sleevemmΦ160Tailstock Taper-Metric No.80Travel of Tailstockmm300Rapid Motor powerkw1.5Coolant pumpkw0.154. Manual Oil Country Lathe Q-390,Q-440, Q-520Features:● The oil country lathes are used for turning pipe threads, inside and outside.● They can be used to make external circles, holes and end surfaces of shafts or discs as general machine tools.● Massive headstock with precision spindle running in tapered roller bearings, 2 lathe chuck mounts on both sides● High torque at the working spindle ensures high chip removal rates when machining parts with large diameters.● Heavy machine bed made of premium cast-iron with hardened and ground guideways.● Central, practical controls for feeds and thread leads.● Wide spectrum of inch and metric threads.Standard Configuration:4 - jaw independent chuck, 2 sets Taper turning device, 1 setOut board support, 1 pieceManual moving tailstockChuck & tool post guardCoolant system, Halogen lightMaintenance tool & tool boxOperation manual in English Specification Q-390 Q-440 Q-520 Max. swing dia. over bedΦ1000mmΦ1000mmΦ1000mm Max. swing dia. over carriageΦ610mmΦ610mmΦ610mm Distance between two centers1500, 3000mm Width of bed755mm755mm755mm Diameter of spindle inner holeΦ390mmΦ440mmΦ520mm Max. Clamped pipe diameterΦ190~380mmΦ273~430mmΦ330~510mm Step of spindle speed9 steps9 steps9 steps Range of spindle speed6~205r.p.m4.9~180r.p.m6~205r.p.m No. of Metric thread and range23 kinds, 1~15mm24 kinds, 1~14mm21 kinds, 1~15mm No. of Inch thread and range22 kinds, 2~28T.P.I40kinds, 2~28T.P.I26kinds, 1~14T.P.I Kind of Longitudinal Feed32kinds, 0.1~1.5mm Kind of Cross Feed and range32kinds, 0.05~0.75mm Tool section ( H×W )45×45mm45×45mm45×45mm Diameter of tailstock sleeveΦ140mmΦ140mmΦ140mm Travel of tailstock sleeve300mm300mm300mm Taper of tailstock sleeveMorse No. 6Morse No. 6Morse No. 6 Main motor power22kw22kw37kw Overall size ( L x W x H)(5000, 6500) × 2200 × 1650mm Weight12500, 15500kg13500, 16500kg14500, 17500kg5. Manual Oil Country Lathe Q-460SStandard Configuration:Independent 4 jaws front and rear chuck , 2 sets; Steady rest, range 50 to 590mm, 1 set ; Follow rest, range 50 to 220mm, 1 set; Taper turning device with length 300mm, 1 set; Out board support, 1 piece; Dead center, 1 piece; Living center, 1 set; Coolant system; Work light; Special tools; Electrical tailstock, Operation manual.Specification Unit Q-460 Diameter of Spindle boremmΦ 460Max. swing over bedmmΦ 1250Max. swing over tool postmmΦ 890Max. workpiece length between centersmm1500/3000Max. turning lengthmm1300/2800Max. load capacity between two centerskg6000Width of bedmm970Spindle speed stepstep8Spindle speed ranger.p.m6.3~315Power of main powerkwAC 30Number and range of Metric threadmm44 kinds, 1~120Number and range of Inch threadT.P.I37 kinds, 30~11/8Number and range of Module threadmm46 kinds, 0.5-60Number and range of Pitch threadD.P46 kinds, 0.5-60Tool post station-Vertical 4-stationTool sectionmm45×45Diameter of Tailstock sleevemmΦ160Tailstock Taper-Metric No.80Travel of Tailstockmm300Rapid Motor powerkw1.5Coolant pumpkw0.156. CNC Oil Country Lathe QK-200 Series (Economic Type)Features:● The machine is developed for oil pipe threading turning, and suitable for all kinds of pipe thread turning.● It is full-closed loop control system CNC pipe threading lathe, also can be used as ordinary CNC lathe.● It is suitable for processing complex shape of shaft, set, the dish parts, such as turning internal and external cylindrical face, internal and external cone face, circular arc surface, end face, cutting and corner, turning thread etc.● Strong adaptability and high processing efficiency, low scrap rate, finished good consistency, can reduce to requirements of skilled workers.● Electronic hand-wheel at the control panel for manual operation ensure easy, quick setup of new workpieces and tools.● High-torque drives and pre-loaded ball screws on all axes.● Including high-performance coolant system, and central lubrication unit.Standard Accessories:FANUC 0i-mate TD CNC controllerManual 3-jaw chuck (QK-130/200/225)Electric 4-jaw chuck (QK-330/390/440/520)Rear support for long workpieceElectric 4-station tool postCentral lubrication systemElectric hand-wheelCoolant systemWorking lampManual tailstockTools & tool boxOperator manual in EnglishModel Unit QK-130 QK-200 QK-225 QK-280 Max. Swing over bedmmΦ630Φ630Φ630Φ1000Max. Swing over carriagemmΦ340Φ340Φ340Φ610Distance between two centersmm1500/30001500/30001500/30001500/3000Width of bedmmDiameter of spindle inner holemmΦ130Φ200Φ225Φ280Max. Clamped pipe diametermmΦ30-126Φ50-193Φ50-220Φ130-270Chuck typemm3 Jaw - Manual 3 Jaw - Manual3 Jaw - Manual4 Jaw - ManualRange of spindle speedr.p.m30-600 (2steps)30-300 (2steps)30-300 (2steps)10-280 (2steps)0~600 (stepless)0~600 (stepless)0~600 (stepless)0~450 (stepless)Feed increment and pitch rangemm0.001-400.001-400.001-400.001-40Max. travel of X/Z-axismmX:320; Z:1250X:320; Z:1250X:320; Z:1250X:500; Z:1250Rapid speed of X/Z-axismm/minX/Z-axis feed servo motor powerkw/N.mX: 1.5/10; Z: 2.3/15X: 1.5/10; Z: 2.3/15X: 1.5/10; Z: 2.3/15X: 2/3/15; Z: 4/7/30Tool section ( H×W )mm32×3232×3232×3240×40Diameter of tailstock sleevemmΦ100Φ100Φ100Φ140Travel of tailstock sleevemmTaper of tailstock sleeve-MT5MT5MT5MT6Main motor powerkw7.5/117.5/117.5/1122CNC controller system-FANUC 0i-mate TD or SIEMENS 808DOverall dimensions ( L×W× H)mm3157×1360×15555157×2200×15205157×2200×15206100 × 2200 × 1750Machine weightkgModel Unit QK-330 QK-390 QK-440 QK-520 Max. Swing over bedmmΦ1000Φ1000Φ1000Φ1200Max. Swing over carriagemmΦ610Φ610Φ610Φ710Distance between two centersmm1500/30001500/30001500/30001500/3000Width of bedmmDiameter of spindle inner holemmΦ330Φ390Φ440Φ520Max. Clamped pipe diametermmΦ190-320Φ190-380Φ270-430Φ330-510Chuck typemm4 Jaw - Electro4 Jaw - Electro4 Jaw - Electro4 Jaw - ElectroRange of spindle speedr.p.m10- 240 (3 steps)10- 200 (3 steps)10- 200 (3 steps)10- 200 (3 steps)Feed increment and pitch rangemm0.001-400.001-400.001-400.001-40Max. travel of X/Z-axismmX:500; Z:1250X:500; Z:1250X:500; Z:1250X:500; Z:1250Rapid speed of X/Z-axismm/minX/Z-axis feed servo motor powerkw/N.mX: 2/3/15; Z: 4/7/30X: 2/3/15; Z: 4/7/30X: 2/3/15; Z: 4/7/30X: 2/3/15; Z: 4/7/30Tool section ( H×W )mm40×4040×4040×4040×40Diameter of tailstock sleevemmΦ140Φ140Φ140Φ140Travel of tailstock sleevemmTaper of tailstock sleeve-MT6MT6MT6MT6Main motor power (Inverter)kw22222237CNC controller system-FANUC 0i-mate TD or SIEMENS 808DOverall dimensions ( L×W× H)mm5157×1360×15555157×2200×15205157×2200×15206100 × 2200 × 1750Machine weightkg. CNC Oil Country Lathe QK-260AStandard Configuration:• CNC controller: - FANUC 0i TD - SIEMENS 828D • 3-Jaw chuck Φ630(front); 4-Jaw Φ630(rear) - QK-230A Double 4-Jaw chuck Φ630mm (front + rear) - QK-260A• 4-station electric tool post.• Auto. centralized lubrication system• Full set of cutting fluid system• Electrical box with air conditions• Coolant system, Working light• Electrical moving tailstock • Operator manual in English• 380V-50Hz-3Ph or as client’s request.Model QK-230A QK-260A Max. turning diameter over bed Φ800mmΦ1000mm Max.turning diameter over carriageΦ480mmΦ630mm Distance between two centers1500/3000mm1500/3000mm Max.machining length1300/2800mm1300/2800mm Max. diameter of pipe (manual chuck)Φ230mmΦ70~260mm Bed width600mm755mm Spindle boreΦ240mmΦ275mm Spindle noseC15A2-15 Range of spindle speed20-680rpm (Stepless)6-400rpm (Stepless) Min.feed increment of X/Z-axis0.001/0.001mm0.001/0.001mm Rapid speeds of X/Z-axis3000/6000mm/min3000/6000mm/min Max.travel of X-axis420mm630mm Indexing time4s4s Indexing repeatility0.010.01 Section of tool shank40×4040×40 Diameter of tailstock quill100mm160mm Travel of tailstock quill250mm300mm Taper hole of tailstock quillMorse No.6Morse No.6 Main motor power( Inverter)15kw18.5kw Workpiece accuracyIT6-IT7IT6-IT7 Surface roughnessRa1.6μmRa1.6μm8. CNC Oil Country Lathe QK-460AStandard Configuration:• CNC controller: FANUC 0i TD or SIEMENS 828D with "shop turn" • Double 4-Jaw chuck (Φ1000mm).• 4-station electric tool post.• Auto. centralized lubrication system• Full set of cutting fluid system• Electrical box with air conditions• Coolant system, Working light• Electrical moving tailstock • Operator manual in English• 380V-50Hz-3Ph or as client’s request.Model QK-460A Max. turning diameter over bedΦ1250mm Max.turning diameter over carriageΦ900mm Distance between two centers3000/5000mm Max.machining length2800/4800mm Max. diameter of pipe (manual chuck)Φ300~460mm Bed width1100mm Spindle boreΦ465mm Spindle noseA2-28 Range of spindle speed5-200rpm (Stepless) Min.feed increment of X/Z-axis0.001/0.001mm Rapid speeds of X/Z-axis3000/6000mm/min Max.travel of X-axis800mm Tool-post working positionsVertical 4-position (300×300) Indexing time4s Indexing repeatility0.01 Section of tool shank40×40mm Diameter of tailstock quill160mm Travel of tailstock quill300mm Taper hole of tailstock quillMorse No.6 Main motor power( Inverter)28/38kw Workpiece accuracyIT6-IT7 Surface roughnessRa1.6μm9. Auto. Production LineCNC pipe threading machine-With Auto. Feed Production lineSpecificationAFP-300AFP-600 Range of pipes diameterФ80~Ф300mmФ400~Ф600mm Pipes material thickness4~20mm Pipes material length6~9m6~12m6~9m6~12m Feeding speed5~50m/min Frequency reduction machine0.75KW/100Hz 1:20 Working air pressure0.4~0.8MPa0.6~0.8MPa Working voltage.power380V, 1.5KW/3.75KW Overall dimension (L×W×H )6×1.3×1.4m12×1.3×1.4m6×1.4×1.5m12×1.4×1.5m Gross/Net weight0.9/0.8ton1.4/1.3ton1.1/1.0ton1.6/1.5ton
Другие товары поставщика
|
|
|
1. Manual Oil Country Lathe Q-225Features:● The oil country lathes are used for turning pipe threads,Website:, inside and outside.● They can be use... |
|
|
|
1. Horizontal Lathe - Loading 2tonsKey Feature:• Top quality proved by market• 20 years history at least.• Three support spindle structure• Split t... |
|
|
|
1. Gantry Type Surface GrinderFeatures:• SIEMENS touch operation panel • Z-axis: Rectangular guideway; Y-axis: precision linear guideway (HIWIN, T... |
|
|
|
1.Deep Hole Honing Machine -- DHK-100 DHK-200Features:●This series NC deep hole honing machine is the dedicated machine for honing and polishing of... |
|
|
|
1.CNC Deep Hole Skiving Roller Burnishing Machine -- DSBK-100 DSBK-200Application:The CNC skiving roller burnishing machine is newly developed by o... |
Все товары поставщика
Похожие товары
