Amazon product inspection

• 
• 
• 
• 
• 
• 

Zhejiang Huainan Commodity Inspection Co., Ltd. specializes in providing third-party inspection services, third-party factory inspection services, and container loading supervision services. It is a professional third-party inspection company, foreign trade inspection company, third-party quality inspection company, third-party inspection company, third-party inspection company.

The sensory test is to put the leather shoes in the hands and on the table and compare and test them with eyes, hand molds, and measuring tools. This inspection method is mainly based on the actual experience of the inspectors, so it has a certain degree of subjectivity. But from the current level of the shoe industry, sensory inspection is still the main method of leather shoe inspection. The inspection requires sufficient indoor light, but direct sunlight should be avoided during the inspection. The viewing distance is generally about 500mm. Sensory inspection should be carried out from the following aspects:

Put a pair of leather shoes on the table at the same time, and carry out the following tests one by one:

Carefully measure the length of the front upper, the length of the toe cap, the height of the rear upper, the height of the heel, the length and width of the outsole of the two shoes, and the allowable error range shall not be exceeded.

Observe whether the shape is correct, whether the style is beautiful and novel, whether the parts of the two shoes are symmetrical; whether their height, length, width, fat and thinness are symmetrical.

The eyes are at the same height as the table top, when viewed from the side, the position of the forefoot touching the ground should be within the sole of the foot, not forward or backward; the head tilt should be between 7-15mm, not too large or too small; the rear arch should not be too large Or too small; the heel should be perpendicular to the ground, not inclined forward and backward; the palm surface should be completely in contact with the desktop, and the center of gravity should be on the palm.

The eyes are at the same height as the table top. Viewed from the front, the height of the inner and outer sides of the outsole of the two shoes should be the same.

The eyes are at the same height as the table top, and the heel and back seam should not be skewed when viewed from behind.

The bezel should not be lower than the ankle bone when worn on the foot. For leather shoes with a higher back and a hard bezel, more attention should be paid to this inspection.

Другие товары поставщика

	Третья сторона тестирует товары	Чжэцзян хва, специализированная компания, специализирующаяся на тестировании товаров третьей стороной, специализируется на аутсорсинге, аутсорсинге...
	Amazon product inspection	Pre-production inspectionis to be conducted at the beginning of production or even before the start of manufacturing.During-production inspectionis...
	Amazon product inspection	Zhejiang Huainan Commodity Inspection Co., Ltd. specializes in providing third-party inspection services, third-party factory inspection services, ...
	Amazon factory inspection	Service Introduction: Whether you are developing products, projects, or processes, you need trusted independent inspection to ensure that both your...
	Product Inspection Services	HQC-inspection service is one of the leading third party quality control service providers in China, has been providing product inspection, plant /...

Похожие товары

	Suzhou Piaozhihua Composite Material Technology Co., Ltd.	Продавец: Suzhou Piaozhihua Composite Material Technology Co., Ltd.	Piao Zhihua is a private company specializing in the production of high-grade self-adhesive label...
	Distal Radius L-Shaped Locking Plate	Продавец: ATOM Medical Devices Co., Ltd	Model Number: 4062200 Material:Material: TA3G Pure titanium, TC4 titanium alloy Application: Fo...
	Posterior Thoracolumbar Spinal System 5.5	Продавец: ATOM Medical Devices Co., Ltd	This Posterior Thoracolumbar Spinal System 5.5is a comprehensive posterior spinal fixation soluti...
	Lumbar Interbody Fusion Cage(Insert-Type)	Продавец: ATOM Medical Devices Co., Ltd	The Uni-L self-stabilizing lumbar interbody fusion cageis a PEEK (polyetheretherketone) device fe...
	Anterior Cervical Plate - Type II	Продавец: ATOM Medical Devices Co., Ltd	Model Number: 1010002 Material: Titanium alloy TC4 Application: Anterior internal fixation duri...