.

Amazon product inspection

Zhejiang Huainan Commodity Inspection Co., Ltd. specializes in providing third-party inspection services, third-party factory inspection services, and container loading supervision services. It is a professional third-party inspection company, foreign trade inspection company, third-party quality inspection company, third-party inspection company, third-party inspection company.

The sensory test is to put the leather shoes in the hands and on the table and compare and test them with eyes, hand molds, and measuring tools. This inspection method is mainly based on the actual experience of the inspectors, so it has a certain degree of subjectivity. But from the current level of the shoe industry, sensory inspection is still the main method of leather shoe inspection. The inspection requires sufficient indoor light, but direct sunlight should be avoided during the inspection. The viewing distance is generally about 500mm. Sensory inspection should be carried out from the following aspects:

Put a pair of leather shoes on the table at the same time, and carry out the following tests one by one:

Carefully measure the length of the front upper, the length of the toe cap, the height of the rear upper, the height of the heel, the length and width of the outsole of the two shoes, and the allowable error range shall not be exceeded.

Observe whether the shape is correct, whether the style is beautiful and novel, whether the parts of the two shoes are symmetrical; whether their height, length, width, fat and thinness are symmetrical.

The eyes are at the same height as the table top, when viewed from the side, the position of the forefoot touching the ground should be within the sole of the foot, not forward or backward; the head tilt should be between 7-15mm, not too large or too small; the rear arch should not be too large Or too small; the heel should be perpendicular to the ground, not inclined forward and backward; the palm surface should be completely in contact with the desktop, and the center of gravity should be on the palm.

The eyes are at the same height as the table top. Viewed from the front, the height of the inner and outer sides of the outsole of the two shoes should be the same.

The eyes are at the same height as the table top, and the heel and back seam should not be skewed when viewed from behind.

The bezel should not be lower than the ankle bone when worn on the foot. For leather shoes with a higher back and a hard bezel, more attention should be paid to this inspection.


在线联系供应商

至: Zhejiang Huajian Commodity Inspection Co. LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Amazon factory inspection
Amazon factory inspection Service Introduction: Whether you are developing products, projects, or processes, you need trusted independent inspection to ensure that both your...
Furniture Inspection by Huajian Company
Furniture Inspection by Huajian Company Furniture Inspection by Huajian Company On-site inspection of furniture Check marks - count the total number of boxes - determine the sampling qu...
Zhejiang Huajian company lamps inspection methods and standards
Zhejiang Huajian company lamps inspection methods and standards Zhejiang Huajian company lamps inspection methods and standards Zhejiang Huajian Commodity Inspection co., LTD. is a professional supplier providi...
Amazon product inspection
Amazon product inspection Zhejiang Huainan Commodity Inspection Co., Ltd. specializes in providing third-party inspection services, third-party factory inspection services, ...
Amazon product inspection
Amazon product inspection Pre-production inspectionis to be conducted at the beginning of production or even before the start of manufacturing.During-production inspectionis...
供应产品

Same products

Air insulated Dry type transformer VPI
Air insulated Dry type transformer VPI 卖方: TAILI ELECTRIC CO.,LTD. Air insulated Dry type transformer VPI TAILI SG(B) air-barrier dry-type transformer( VPI) is des...
Cast Resin Dry Type Transformer with Cooling Fan
Cast Resin Dry Type Transformer with Cooling Fan 卖方: TAILI ELECTRIC CO.,LTD. Cast Resin Dry Type Transformer with Cooling Fan Taili’s advanced epoxy resin casting proc...
1250kVA Dry type Transformer for Bangladesh
1250kVA Dry type Transformer for Bangladesh 卖方: TAILI ELECTRIC CO.,LTD. 1250kVA Dry type Transformer for Bangladesh Taili's advanced epoxy resin casting process ensures...
35kV Dry-type transformer with OLTC
35kV Dry-type transformer with OLTC 卖方: TAILI ELECTRIC CO.,LTD. 35kV Dry-type transformer with OLTC Taili's35kV Dry-type Transformer with OLTC (On-Load Tap Chan...
Cast Resin Dry Type Transformer
Cast Resin Dry Type Transformer 卖方: TAILI ELECTRIC CO.,LTD. Cast Resin Dry Type Transformer IEC/ANSICast Resin TransformersfromTAILI Electric, is difference...