10 Pin Automotive Connector Housing
Focusing on the auto electrical connectionsindustry, Langrun Electric provides a wide variety of different 10 pin automotive connectors such as rear mirror connector, radio wire connector, ECU connector, sensor plug connector etc.
10 pin automotive connectorand housing is made of injection molding PBT and PA66. Both PA66 and PBT are thermoplastics.
PA66 is widely used in automobile industry, instrument housing and other products that require resistance and high strength requirements.
The advantages of PBT are that it can maintain good electrical performance, electrical insulation and good molding properties in a humid environment. Based on these characteristics of PBT, the automotive industry and electronic demand for PBT is also growing rapidly.
All the 10 pin automotive connector housingproduced by Langrun Electric complies with RoHs and Reach requirement.
The Electrical Performance of 10 Pin Automotive Connector Housing
01 Contact resistance
High quality connector should have low and stable contact resistance. The contact resistance of the connector ranges from a few millions to tens of millions.
02 Insulation resistance
Insulation resistance is a measure of the insulation performance between the contacts of electrical connectors and between the contacts and the housing. The order of magnitude ranges from hundreds of megabytes to thousands of megabytes.
03 Electrical strength
Electrical strength, or voltage and dielectric voltage resistance, is the ability to withstand the rated test voltage between the contacts of the connector or between the contacts and the housing.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
282106-1 Female Fuel Tank Pump Connectors Superseal Waterproof Connector Housing | With the 30 years of mold manufacturing experience, Langrun is capable of product development and mould processing. We pay more attention to qualit... |
 |
Automotive Wire Harness Connector Ignition Coil Connector Housing | The specification of automotive wire harness connector coil connectorhousing Wenzhou Langrun Electric Co.,Ltd. is a professional electronic conn... |
 |
156-00527 T30REC20 Nylon Cable Tie With Cable Clip | With the 30 years of mold manufacturering experience, Langrun is capable of auto connectorproduct development and mould processing. We pay more att... |
 |
156-00962 T18REC10SDSET 100mm Nylon Cable Tie With Edge Clip | With the 30 years of mold manufacturering experience, Langrun is capable of auto connectorproduct development and mould processing. We pay more att... |
 |
Automotive Wire Harness Crimping Terminal | Langrun, founded in 2009, is located in Yueqing City, Zhejiang province, an economically developed city. We are a professional automotive electrica... |
Похожие товары
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Продавец: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
Конденсатор EEF-CX0J101R PANASONIC SMD SPEC полимер 100UF 6,3v SMD LF | Продавец: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
