10 Pin Automotive Connector Housing
Focusing on the auto electrical connectionsindustry, Langrun Electric provides a wide variety of different 10 pin automotive connectors such as rear mirror connector, radio wire connector, ECU connector, sensor plug connector etc.
10 pin automotive connectorand housing is made of injection molding PBT and PA66. Both PA66 and PBT are thermoplastics.
PA66 is widely used in automobile industry, instrument housing and other products that require resistance and high strength requirements.
The advantages of PBT are that it can maintain good electrical performance, electrical insulation and good molding properties in a humid environment. Based on these characteristics of PBT, the automotive industry and electronic demand for PBT is also growing rapidly.
All the 10 pin automotive connector housingproduced by Langrun Electric complies with RoHs and Reach requirement.
The Electrical Performance of 10 Pin Automotive Connector Housing
01 Contact resistance
High quality connector should have low and stable contact resistance. The contact resistance of the connector ranges from a few millions to tens of millions.
02 Insulation resistance
Insulation resistance is a measure of the insulation performance between the contacts of electrical connectors and between the contacts and the housing. The order of magnitude ranges from hundreds of megabytes to thousands of megabytes.
03 Electrical strength
Electrical strength, or voltage and dielectric voltage resistance, is the ability to withstand the rated test voltage between the contacts of the connector or between the contacts and the housing.
Send product request
Other supplier products
 |
Automotive Wire Harness Crimping Terminal | Langrun, founded in 2009, is located in Yueqing City, Zhejiang province, an economically developed city. We are a professional automotive electrica... |
 |
9 Pin Automotive Connector Housing | Performing different functions, all of the 9 pin automotive connectormanufactured by Langrun Electric can meet the high requirements of REACH and R... |
 |
Waterproof Cable Tie | Waterproof cable tieis a kind of one-piece fixing tie with rubber seal. Mainly used in the automotive industry, especially suitable for car body ap... |
 |
Car Wiring Clip | Langrun, founded in 2009, is located in Yueqing City, Zhejiang province, an economically developed city. We are a professional automotive electrica... |
 |
2 Way Male Female Automotive Fog Lamp Connector Housing Waterproof Plug Mg640322-5 Mg610320-5 | Automotive electrical connectionsare widely used in every parts of the car. Use with wiring harness, they are able to offer the connection solution... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
