UAV Motor Series
Direct mount propeller or Hub style compatible
Multi-length mounting hardware included
High Power N42sh magnets
Precision NMB bearings
12v Brushless MotorSeries
Motor efficiency is typically calculated by dividing thrust by power at 100% throttle, measured in gram/watt. The higher this number is, the more efficient the motor.
High thrust drone motors are important to look at efficiency through the whole throttle range though, not just the top end. Some motors might be efficient at lower throttle but could lose efficiency by drawing increasingly higher current as they approach their limits.
With less efficient motors not only are you wasting energy and flight time, your batteries might also suffer from voltage sag, this effect will be compounded if you are using poor quality LiPo batteries.
Remember that Watt is calculated by multiplying voltage and current, as we know the voltage of the battery we will be using. Another good way to look at efficiency is to use gram/amp (thrust/current).
Generally, the more thrust generated, the larger the current drawn to produce that thrust, so uav motor with high thrust and low current are preferred. Inefficient motors either generate too little thrust or draw too much current.
If you want your plane to fly longer, we suggest that you consider these motors.
U series motors are designed specially for long flight time drones. These motors are highly efficient, light, and run smoothly.
With the guarantee of strength, the caps of U motors are highly hollow-cutted to save weight, so that these motors can reach maximum thrust to weight ratio and gain more flight time.
U series motors are tested with the strictest procedures of TTF’s QC protocols. Each of these motors are dynamically balanced with our high-test standard. The axial and radial runouts of each rotor are tested strictly
Features:
• High Power N42sh magnets
• Precision NMB bearings
• 0.2mm laminations for optimal efficiency
• Ample cut to length motor wires for a clean install
• Direct mount propeller or Hub style compatible
• Multi-length mounting hardware included
U2212/ U3506/ U5208 motors are applicable for 300-500mm class multirotor.
Shenzhen TitanFlying Technology Co., Ltd(TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. We provide drone frame kit, fastest drone motorsand etc. For more information, please feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
AG Drone Motor Series | 24v Brushless Motor Series With standardization of UAV industry segment, the requirements of user are growing rapidly. TTF, is now releasing P ser... | |
Industrial Aerial Drones T2 | With various payloads functions Lightweight materials Regional-planning mode Payload Modules Heavy- lift Capacity Product DescriptionSpecification... | |
Дроны для сельского хозяйства – T1-24L Precision Agriculture Drones | T1-24L Precision Agriculture Drones spraying system equips a 24L capacity of wave-proof tank, efficient water pump, four nozzles. Based on the actu... | |
Introduction of Aerial Photo Drone (APD) Oblique Photograph System | Traditional aerial photography can only shoot objects from vertical angles, while oblique photography carries multiple sensors on the same platform... | |
Racing Drone FPV Frame 195 | Quality pure carbon fiber drone frame More simple operation settings Real-time image transmission Long distance remote control Stable performan... |
Похожие товары
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Продавец: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... | |
Конденсатор EEF-CX0J101R PANASONIC SMD SPEC полимер 100UF 6,3v SMD LF | Продавец: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... | |
Heavy Copper PCB Manufacturer | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... | |
8 Layer ENIG Half Hole Custom PCB | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... | |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |