.

UAV Motor Series

Direct mount propeller or Hub style compatible

Multi-length mounting hardware included

High Power N42sh magnets

Precision NMB bearings

12v Brushless MotorSeries

Motor efficiency is typically calculated by dividing thrust by power at 100% throttle, measured in gram/watt. The higher this number is, the more efficient the motor.

High thrust drone motors are important to look at efficiency through the whole throttle range though, not just the top end. Some motors might be efficient at lower throttle but could lose efficiency by drawing increasingly higher current as they approach their limits.

With less efficient motors not only are you wasting energy and flight time, your batteries might also suffer from voltage sag, this effect will be compounded if you are using poor quality LiPo batteries.

Remember that Watt is calculated by multiplying voltage and current, as we know the voltage of the battery we will be using. Another good way to look at efficiency is to use gram/amp (thrust/current).

Generally, the more thrust generated, the larger the current drawn to produce that thrust, so uav motor with high thrust and low current are preferred. Inefficient motors either generate too little thrust or draw too much current.

If you want your plane to fly longer, we suggest that you consider these motors.

U series motors are designed specially for long flight time drones. These motors are highly efficient, light, and run smoothly.

With the guarantee of strength, the caps of U motors are highly hollow-cutted to save weight, so that these motors can reach maximum thrust to weight ratio and gain more flight time.

U series motors are tested with the strictest procedures of TTF’s QC protocols. Each of these motors are dynamically balanced with our high-test standard. The axial and radial runouts of each rotor are tested strictly

Features:

• High Power N42sh magnets

• Precision NMB bearings

• 0.2mm laminations for optimal efficiency

• Ample cut to length motor wires for a clean install

• Direct mount propeller or Hub style compatible

• Multi-length mounting hardware included

U2212/ U3506/ U5208 motors are applicable for 300-500mm class multirotor.

Shenzhen TitanFlying Technology Co., Ltd(TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. We provide drone frame kit, fastest drone motorsand etc. For more information, please feel free to contact us!


Send product request

To: Shenzhen TitanFlying Technology Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Drone Battery
Drone Battery The next part of your drone is your esc battery. Modern RC drones use lipo batteries, which have a good power to weight ratio and can discharge a l...
Racing Drone Flight Controller OMNIBUS F4 OSD
Racing Drone Flight Controller OMNIBUS F4 OSD BestF4 Flight Controller This version of the Flip32 AIO uses improved components and design that will properly limit the voltage to the Mini OSD pr...
Industry Drone T2 Flight Controller
Industry Drone T2 Flight Controller Multi-rotor Flight Controller Highly Reliable Components Intelligent Avionics System Distributed Design T2 | Multicopter Flight Controller U...
Air Selfie Drone S1
Air Selfie Drone S1 Palm-sized, incomparably exquisite Outdoor protective case Flexible blades Electric Fence ABS shell Product Description Drone Air Selfie –S1...
T1-24L Precision Agriculture Drones
T1-24L Precision Agriculture Drones T1-24L Precision Agriculture Drones spraying system equips a 24L capacity of wave-proof tank, efficient water pump, four nozzles. Based on the act...
All supplier products

Same products

Air insulated Dry type transformer VPI
Air insulated Dry type transformer VPI Seller: TAILI ELECTRIC CO.,LTD. Air insulated Dry type transformer VPI TAILI SG(B) air-barrier dry-type transformer( VPI) is des...
Cast Resin Dry Type Transformer with Cooling Fan
Cast Resin Dry Type Transformer with Cooling Fan Seller: TAILI ELECTRIC CO.,LTD. Cast Resin Dry Type Transformer with Cooling Fan Taili’s advanced epoxy resin casting proc...
1250kVA Dry type Transformer for Bangladesh
1250kVA Dry type Transformer for Bangladesh Seller: TAILI ELECTRIC CO.,LTD. 1250kVA Dry type Transformer for Bangladesh Taili's advanced epoxy resin casting process ensures...
35kV Dry-type transformer with OLTC
35kV Dry-type transformer with OLTC Seller: TAILI ELECTRIC CO.,LTD. 35kV Dry-type transformer with OLTC Taili's35kV Dry-type Transformer with OLTC (On-Load Tap Chan...
Cast Resin Dry Type Transformer
Cast Resin Dry Type Transformer Seller: TAILI ELECTRIC CO.,LTD. Cast Resin Dry Type Transformer IEC/ANSICast Resin TransformersfromTAILI Electric, is difference...