C2-31 Omni-directional Latent Lifting AGV
C2-31 Omni-directional Latent Lifting AGV can move to the bottom of the material trolley, lift the material trolley and move to the destination. In addition, the lift AGV also has an in-situ rotation function. You can choose QR code navigation or magnetic strip daohang according to the on-site environment.
Core Advantages of C2-31 Omnidirectional Latent Lift AGVEquipment
01
Flexible mobility
90-degree corner or 180-degree in-situ rotation & U-turn or lateral movement can work in narrow spaces.
02
Multiple navigation modes
According to different application scenarios, two-dimensional code navigation or magnetic stripe navigation can be selected.
03
Lifting control
It can interact with the elevator to complete the operation of automatically going up and down floors.
04
High positioning accuracy
The primary positioning accuracy can reach ±10mm, and the secondary positioning accuracy can reach ±5mm.
05
High work efficiency
Equipped with a full servo drive, it can increase the speed quickly (0-72 meters per minute only takes 3 seconds), and has a fast rotation function (only 3 seconds for in-situ rotation)
06
Multi-AGV linkage
Synchronous linkage of multiple AGVs is suitable for complex material handling scenarios.
07
Automation and labor saving
No manual intervention is required in the production process, and the scheduling system is fully automatic.
08
Fault self-check
With fault self-checking function, remote fault diagnosis and self-recovery function.
09
Automatic battery charging
When the automated guided vehicle chinadetects a low battery state, it will automatically move to the charging station for charging. The online time can reach 24 hours a day to improve productivity.
10
Multiple security protection
Equipped with laser obstacle detection sensor, mechanical anti-collision device and sound and light warning to ensure safe operation.
If you want to buy a high quality automatic mobile robot, please leave us a message.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
C4 Automated Tugger AGV | AGV tuggerseries AGV can tow the material cart at the rear and can tow multiple carts at a time. At the same time, AGV tuggers can also place pal... |
 |
C5-P2 Balanced Forklift AGV | C5-Q2 is a balanced heavy laser navigation forklift AGV, AGV has no external legs, so there is no need to worry about the interference between the ... |
 |
C3-42 Single Layer-four Conveyor Deck Load AGV | C3-42 is a single layer-four conveyor deck roller unit load carrier AGV, which can automatically dock with the production line or transmission line... |
 |
C3-41 Dual Layer-dual Conveyor Deck Load AGV | C3-41 converyor unit load carrier AGV is a single-layer three-station roller AGV. The roller platform and the production line or transmission line ... |
 |
C5-B2 Pallet Mover AGV | C5-B2 is a laser guided forklift AGV independently developed by Casun, with a load capacity up to 800KG, small volume and small turning radius. Thi... |
Похожие товары
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Продавец: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
Конденсатор EEF-CX0J101R PANASONIC SMD SPEC полимер 100UF 6,3v SMD LF | Продавец: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
