AUTO EVA 12 AUTOMATED PARALLEL NITROGEN EVAPORATOR
RayKol Auto EVA 12 is a nitrogen blow-down automated evaporation system that provides automated evaporation of up to 12 samples in parallel with endpoint detection. This automated nitrogen evaporation system uses vortex airflow generated from stable angled nitrogen blow, to constantly disturb the sample surface and lower its vapor pressure in order to gain gently rapid evaporation under water bath heating. Each sample position is equipped with optical sensor to precisely determine endpoint of concentration. User can have real-time monitoring to whole process through built-in touch screen, make it easier to access and observe.
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEMFEATURES
Batch processing, simultaneous evaporation of up to 12 samples in parallel
Rapid concentration under water bath and nitrogen blowing
Transparent sink design for observation
Good compatibility with various sample vials and ajustable blowing angle
Automatic endpoint detection to avoid over-drying
Sprinkle rinsing to sample vials to maximize recovery rate
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM SPECIFICATIONS
|
Parameter |
Specification |
|
Concentration |
Water bath heating and nitrogen blowing |
|
Sample capacity |
12 |
|
Range of concentration temperature |
Room temperature to 60°C |
|
Sample vials |
65mL, 260mL; glass tube with stems |
|
Endpoint detection |
|
|
Range of gas flow rate |
0 to 5.0mL/min, precise to 0.1mL/min |
|
Software interface |
10-inch built-in screen |
|
Dimension |
58cm x 46cm x 56cm |
|
Weight |
41kg |
|
Power supply |
200 to 240V, 50/60Hz |
|
Power rate |
1500W |
|
Fume hood/ventilation |
Required |
|
Storage temperature |
0 to 40°C |
|
Storage humidity |
20 to 85% |
|
Operating temperature |
10 to 40°C |
|
Operating humidity |
20 to 80% |
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM APPLICATIONS
Auto EVA 12 Automated evaporation system is designed for large-volume concentration for sample batches, typically used to evaporate extracts of soil and water samples from evironment, azo dye from textiles, fat and acid value from fried foods, as well as residues of pesticides and veternary drugs. It can be applicable in types of analysis such as:
Soil and sediment - Determination of organochlorine pesticides - GC/MS
Solid waste - Determination of polychlorinated biphenyls - GCMS
Textiles ― Determination of the banned azo colourants
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM BENIFITS
Large sample capacity: each batch can accommodate max. 12 samples, flexible in 65mL and 260mL sample tubes, with endpoint detection.
Gradient nitrogen blowdown: achieve by controlling flow rate of nitrogen gas to increase gradually with time, to ensure efficient evaporation.
Adjustable blowdown angle: optimize the shear vortex action by adjust the angle of the needles pointing, to ensure efficient evaporation.
Sprinkle rinsing: optional configuration of rinising module can boost up the recovery rate of target analytes by flushing back the evaporated analytes.
Automatic water refill: Software control water in and out, with water level sensor to detect endpoint of refill and drain the water bath, to keep it hygiene and clean.
Now the price of automated lab systemsis reasonable, if you have needs to buy lab automationequipment, please leave us a message.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| SPE CARTRIDGES | RayCure SPE series provides high-quality SPE cartridgesfor various types of solid phase extraction, including manifold, vacuum as well as automated... | |
| AUTOMATED HOMOGENIZER | With development of food safety and biological medicines, automated laboratory homogenizerhas been found an increasingly utilized in sample pre-tre... | |
| Automated Liquid Handling | RayKol robotic liquid handling systemcombines high perfomance and speed. Errors at pipetting the wrong volume are commonly seen in manual sample pr... | |
| RAYCURE QUECHERS CERAMIC HOMOGENIZERS | RayCure QuEChERS Ceramic homogenizerscan effectively increase sample preparation efficiency by their excellent homogenizing and dispersing abilitie... | |
| RAYCURE QUECHERS CERAMIC HOMOGENIZERS | RayCure QuEChERS Ceramic homogenizerscan effectively increase sample preparation efficiency by their excellent homogenizing and dispersing abilitie... |
Похожие товары
| Lightweight Liquid-cooled LED Module 300W | Продавец: Shenzhen Getian Opto-electronics Co., Ltd. | Lightweight Liquid-cooled LED Module 300W Product Description Lightweight Liquid-cooledLED Modu... | |
| 600W Liquid Cooled LED Module | Продавец: Shenzhen Getian Opto-electronics Co., Ltd. | 600W Liquid Cooled LED Module Getian’s600W Liquid CooledLED Moduleis designed for high-pow... | |
| Liquid-cooled LED Module | Продавец: Shenzhen Getian Opto-electronics Co., Ltd. | Liquid-cooled LED Module Getian’sLiquid Cooled LED Modulesare designed to deliver stable p... | |
| High-purity silica nano powder | Продавец: Hebei Guiyan Electronic Materials CO., Ltd | High-purity silica nano powder High-purity silica nanopowderis a nano-silica powder prepared via... | |
| High purity organic colloidal Silica | Продавец: Hebei Guiyan Electronic Materials CO., Ltd | High purity organic colloidal Silica High-purity organic silica solis manufactured from high-pur... |














