AUTO EVA 12 AUTOMATED PARALLEL NITROGEN EVAPORATOR
RayKol Auto EVA 12 is a nitrogen blow-down automated evaporation system that provides automated evaporation of up to 12 samples in parallel with endpoint detection. This automated nitrogen evaporation system uses vortex airflow generated from stable angled nitrogen blow, to constantly disturb the sample surface and lower its vapor pressure in order to gain gently rapid evaporation under water bath heating. Each sample position is equipped with optical sensor to precisely determine endpoint of concentration. User can have real-time monitoring to whole process through built-in touch screen, make it easier to access and observe.
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEMFEATURES
Batch processing, simultaneous evaporation of up to 12 samples in parallel
Rapid concentration under water bath and nitrogen blowing
Transparent sink design for observation
Good compatibility with various sample vials and ajustable blowing angle
Automatic endpoint detection to avoid over-drying
Sprinkle rinsing to sample vials to maximize recovery rate
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM SPECIFICATIONS
|
Parameter |
Specification |
|
Concentration |
Water bath heating and nitrogen blowing |
|
Sample capacity |
12 |
|
Range of concentration temperature |
Room temperature to 60°C |
|
Sample vials |
65mL, 260mL; glass tube with stems |
|
Endpoint detection |
|
|
Range of gas flow rate |
0 to 5.0mL/min, precise to 0.1mL/min |
|
Software interface |
10-inch built-in screen |
|
Dimension |
58cm x 46cm x 56cm |
|
Weight |
41kg |
|
Power supply |
200 to 240V, 50/60Hz |
|
Power rate |
1500W |
|
Fume hood/ventilation |
Required |
|
Storage temperature |
0 to 40°C |
|
Storage humidity |
20 to 85% |
|
Operating temperature |
10 to 40°C |
|
Operating humidity |
20 to 80% |
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM APPLICATIONS
Auto EVA 12 Automated evaporation system is designed for large-volume concentration for sample batches, typically used to evaporate extracts of soil and water samples from evironment, azo dye from textiles, fat and acid value from fried foods, as well as residues of pesticides and veternary drugs. It can be applicable in types of analysis such as:
Soil and sediment - Determination of organochlorine pesticides - GC/MS
Solid waste - Determination of polychlorinated biphenyls - GCMS
Textiles ― Determination of the banned azo colourants
AUTO EVA 12 AUTOMATED EVAPORATION SYSTEM BENIFITS
Large sample capacity: each batch can accommodate max. 12 samples, flexible in 65mL and 260mL sample tubes, with endpoint detection.
Gradient nitrogen blowdown: achieve by controlling flow rate of nitrogen gas to increase gradually with time, to ensure efficient evaporation.
Adjustable blowdown angle: optimize the shear vortex action by adjust the angle of the needles pointing, to ensure efficient evaporation.
Sprinkle rinsing: optional configuration of rinising module can boost up the recovery rate of target analytes by flushing back the evaporated analytes.
Automatic water refill: Software control water in and out, with water level sensor to detect endpoint of refill and drain the water bath, to keep it hygiene and clean.
Now the price of automated lab systemsis reasonable, if you have needs to buy lab automationequipment, please leave us a message.
在线联系供应商
Other supplier products
 |
AUTO GDA SERIES AUTOMATED GRAPHITE DIGESTION SYSTEM | Raykol Auto GDA series Automated graphite digesteris designed based on wet digestion theory, it can automatically complete full digestion process i... |
 |
AUTOMATED LAB EQUIPMENT | Automated laboratory instrumentsis increasingly becoming in demand as laboratories require for higher throughput and automation. These laboratory a... |
 |
NITROGEN EVAPORATION | As one ofprofessional and experienced nitrogen evaporator suppliers, RayKol Automated nitrogen evaporation systemis specialized in simultaneous and... |
 |
VACUUM EVAPORATION | Raykol vacuum evaporation equipmentis an ideal solution for analytical laboratories. In the analysis of environmental pollutants and food safety, t... |
 |
QUECHERS EXTRACTION | RayCure QuEChERS Dispersive SPE kits provide extraction salts, clean-up kits and ceramic homogenizers for methods and standards using QuEChERS tech... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | 卖方: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | 卖方: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
