Analog Galvo Driver
Han's Scanner analog galvo driverboard is designed for the full series of Han's Scanner photoelectric galvanometer motor, using the traditional PID closed-loop control mode, stable and reliable performance; with a variety of different configurations, support analog and digital signal input, a variety of different power amplifier devices can drive mirrors with different loads from 3mm-50mm to achieve optimal dynamic performance, to meet the speed and accuracy requirements of various high-end applications.
Key Features Of Analog Galvo Driver
3-in-1 analog driver board
Integrate DA card and analog driver board, compact size
TDA8950 D class work output, low heat
First generation galvo driver
More than 10 years in the market, stable performance
A driver board drives a galvanometer
LM3886 AB dual-power amplifier, maximum 68W+68W power output, strong driving capability
Second generation analog driver board
TDA8950 type D power amplifier output, low heat
A driver board drives a galvanometer, driving capacity is strong
TDA8950 power amplifier, maximum 150W+150W power output, strong driving ability
Improved speed performance by more than 50% compared to the first generation analog driver board.
Specifications OfAnalog Galvo Driver
Analog Galvo Driver Electric Parameter
Power Supply Requirements |
+/-15 to +/-28 VDC Configurations Available |
Maximum Drive Current Limit |
10 AMPSPeak 5 AMPS Rms (Power Supply And Load Dependent) |
Operating Temperature Range |
0~50℃ |
Connector Definition
Description |
J2 (10pin) Of Driver ST16xx |
GND |
1 |
GND |
2 |
GND |
3 |
GND |
4 |
POS1 |
5 |
MOTOR+ |
6 |
MOTOR- |
7 |
GND |
8 |
LED+ |
9 |
POS2 |
10 |
Description |
J1 (2pin) Of Driver ST16xx |
- |
1 |
+ |
2 |
Description |
J3 (4pin) Of Driver ST16xx |
-15V |
3 |
GND |
2 |
+15V |
4 |
NC |
1 |
Description |
J4 (10pin) Of Driver ST16xx |
NC |
1 |
POS_FB |
2 |
GND |
3 |
CMD_ERR |
4 |
V_CRT |
5 |
V_LED |
6 |
NC |
7 |
NC |
8 |
Power Supply Requirements |
+/-15 to +/-28 VDC Configurations Available |
Maximum Drive Current Limit |
10 AMPS Peak 5 AMPS Rms (Power Supply And Load Dependent) |
Operating Temperature Range |
0~50℃ |
Connector Definition
Description |
J2 (10pin) Of Driver Board ST16XX |
Remark |
GND |
1 |
Power Ground |
GND |
2 |
Power Ground |
GND |
3 |
Power Ground |
GND |
4 |
Power Ground |
POS1 |
5 |
Photocell Position Feedback Signal 1 |
MOTOR+ |
6 |
Motor Signal + |
MOTOR- |
7 |
Motor Signal - |
GND |
8 |
Power Ground |
LED+ |
9 |
LED Positive Terminal |
POS2 |
10 |
Photocell Position Feedback Signal 2 |
J1 Analog signal control port, communication through serial port
Description |
J1 (2pin) Of Driver Board ST16XX |
Remark |
- |
1 |
Analog Negative Signal Input (Pulse Signal) |
+ |
2 |
Analog Positive Signal Input (Pulse Signal) |
Description |
J3 (4pin) Of Driver ST16xx |
Remark |
-15V |
3 |
Negative Of Power Supply (Current 3A) |
GND |
2 |
Power Ground |
+15V |
4 |
Power Supply Positive Electrode (Current 3A) |
NC |
1 |
Suspend In Midair |
Description |
J4 (10pin) Of Driver Board ST16XX |
Remark |
NC |
1 |
Suspend In Midair |
POS_FB |
2 |
Motor Position Feedback Signal |
GND |
3 |
Power Ground |
CMD_ERR |
4 |
Command Error |
V_CRT |
5 |
Motor Current Sampling Signal |
V_LED |
6 |
Motor LED Voltage |
NC |
7 |
Suspend In Midair |
NC |
8 |
Suspend In Midair |
For more information about cost of galvanometerand buy scanning galvanometer, please feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
High Speed 3d & 2.5d Scanning System 14mm | The 2.5D&3D system has the function of conventional 2D galvanometer, and a zoom module is added on the basis of the conventional galvanometer, ... | |
5-axis Laser Micromachining System | The ordinary laser drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processin... | |
Laser Lens | Common Fθ lens is a series of general lens used in laserfields. The common F-theta lens has developed into the 3th generation product after e... | |
ExtraScan Head | The Extrascan is Chinese first fully digital scanning galvanometer for high precision and drift requirements. This 2 axis galvanometermodel coverag... | |
5-axis Laser Micromachining System | 5-axis Laser MicromachiningSystem The ordinary precession drillingsystem can only process the taper hole, and can not achieve the standard strai... |
Похожие товары
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Продавец: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... | |
Конденсатор EEF-CX0J101R PANASONIC SMD SPEC полимер 100UF 6,3v SMD LF | Продавец: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... | |
Heavy Copper PCB Manufacturer | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... | |
8 Layer ENIG Half Hole Custom PCB | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... | |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Продавец: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |