GRADE B PATCH CORD
T&S grade B patchcord is the patchcord with the random mating performance of Grade B as IEC-61753-1 defined, more than 97% of maximum 0.25dB random mated with each other and the average is less than 0.12dB. Simplex, duplex grade B patchcord is well fabricated and all grade B connectors (including LC, MU, SC, FC, etc.) are compliant to IEC-61754, end face geometry is superior to IEC-61755. As an experienced patch cord manufacturer, T&S provides high-quality grade B patchcord for years.
Features of Grade B Patch Cord
IEC 61753-1 random mating grade B
Precision zirconia ferrules
LC, MU, SC, FC, ST, all single fiber connector
Usually available on single-mode connector
Excellent geometry and end face appearance
Good repeatability and interchangeability
Flame retardant optical fiber cable
Standard Compliance of Grade B Patch Cord
Connector compliant to IEC 61754
Optical fiber cable compliant to IEC 60793
ITU G.657
Qualified to Telcordia GR-326-Core
Reach, RoHS and SvHC compliant
Specifications of Grade B Patch Cord
Introduction of Grade B Patch Cord
With the advances in fiber optic technology and transmission systems, reliable cabling systems are becoming even more important. Active optical equipment, which is often worth hundreds of thousands of dollars, is all connected to the network via the humble fiber optic patch cord or patch lead. The risk of network downtime due to unreliable cabling is one that should be avoided. Therefore, these types of networks, along with many other Data Center and high-speed Commercial networks require reliable cabling infrastructure in order to maximize performance and to ensure long term reliability.
Optical Fiber Connector Grades of Grade B Patch Cord
IEC standards dictate the connector performance for each grade of fiber-optic patch cord connectorbased on IEC 61753-1. As defined, there are four grades for insertion loss from A (best) to D (worst). For conventional patch cord, mated performance is over 0.5dB, even to 1.0dB. This may cause the whole high-speed optical connection system unreliable and transmission unstable. Therefore, grade B is stable with excellent optical performance of maximum 0.25dB while mated each other which is a guarantee for hundreds of gigabit data exchange with connections.
If you want to know more types of optical communications products, please visit our website.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
MTP/MPO LOOPBACK | T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed b... |
 |
PLC WAFER & CHIP | As an experienced plc splitter factory, T&S offers PLC splitter wafers as well. Based on Planar Lightwave Circuit technologies, PLC splitter wa... |
 |
QSFP+ 40G LR4 2KM | The qsfp module is a highly integrated 4x10G transceiver focused on reach, bandwidth, density and cost for high port-count 40G systems, and client-... |
 |
FBG SENSOR | FBG SensorFBG sensors can be deployed in harsh environments including high temperature, high radiation, high vacuum, high pressure and low temperat... |
 |
PLC SPLITTER | PLC SPLITTER As a professional plc splitter manufacturer, T & S Communication produces a planar optical waveguide chip on its own and manufactu... |
Похожие товары
 |
Warehouse Automation Expert | Продавец: HAI ROBOTICS | Warehouse Expert Intelligent Case-to-person Solution Hai Robotics provides highly efficient Goo... |
 |
Retail Logistics Solutions | Продавец: HAI ROBOTICS | Logistics Management in Retail Industry As market instability factors continue to increase, comp... |
 |
Healthcare | Продавец: HAI ROBOTICS | Healthcare Supply Chain Automation Due to aging populations and increased disease rates, medical... |
 |
Apparel | Продавец: HAI ROBOTICS | As the global fashion industry continues to grow, the supply chain is facing a range of challenge... |
 |
Electronics | Продавец: HAI ROBOTICS | As consumer demands for personalization and customization continue to rise, production modes are ... |
