.

LC/SC LOOPBACK


LC or SC loopback or other customized, SM and MM fiber type for option, optical information routine exchange or test and equipment required, LC loopback is RJ-45 style interface. All fiber optic loopback is compliant to Telcordia, IEC and EIA/TIA standard.

Features of SC/LC Loopback
Duplex connector or multi-fiber connector

MPO or MTP connector(for multi-fiber connector)

Standard loss or low loss(for multi-fiber connector)

PC or APC polish

Cable form or housing form

Available in G.652, G.657, OM1, OM2, OM3, OM4 fiber

Option for LSZH, OFNR or OFNP cable jacket

Option for A, B or C polarity or Customized(for multi-fiber connector)

Customized length available(multi-fiber connector≥15cm; duplex connector≥7.5cm)

100% factory terminated and tested


Applications of LC/SC Loopback
System loop test

Optical loop test

Aging and testing of the system


Standards Compliance of LC/SC Loopback
TIA/EIA-568.3-D

ISO/IEC 11801

IEC-61754-7

IEC61754-20

IEC61754-4

EIA/TIA-604-5

GR-1435-CORE

GR-326-CORE

NFPA 262 or IEC 60332

Compliant to Directive 2002/95/EC (RoHS)

REACH SvHC

EN 50575

Housing and Pull-tab of SC/LC Loopback Connector
The loopback is both ends of fiber in a duplex connector or a multi-fiber connector, then the optical signal in the same connector, don't change signals or repeated back to its itself. It can provide an effective solution, test the emission ability of the network equipment and receive sensitivity, especially in 40/100G network fiber communication through back signal positioning can be all kinds of potential phenomenon, so as to achieve optical fiber network in pairs on a single element or interface and effective test and evaluation of the Internet.



Отправить запрос, связаться с поставщиком

Кому: Sumbexauto
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

MTP®/MPO Harness Cable
MTP®/MPO Harness Cable MTP/MPOharness cables are a kind of MTP®/MPO fanout harness cable or breakout fiber optic harness assemblywith one MTP®/MPO connector on on...
QSFP+ 40G LR4 10KM
QSFP+ 40G LR4 10KM QSFP+ 40G LR4 10KM The QSFP+ 40G-LR4-10km module is a highly integrated 4x10G transceiver focused on reach, bandwidth, density and cost for high po...
10G SFP+ AOC
10G SFP+ AOC T&S Communication TSPA-85192-xxxC is a Pluggable SFP for 10 Gigabit Ethernet, compliant with the SFF-8431. This transceiver is a high-performan...
FIBER OPTIC MASTER CORD
FIBER OPTIC MASTER CORD Fiber optical master cordand bus cord are produced by standard ferrule with high-standard connector kits via special production process. According ...
FBG OPTICAL BRAGG GRATTING SENSORS
FBG OPTICAL BRAGG GRATTING SENSORS Being a fiber optic sensor, a FBG sensor has all the advantages usually attributed to these devices, such as low loss relative to the fiber length,...
Все товары поставщика

Похожие товары

SFP28 25G LR
SFP28 25G LR Продавец: Sumbexauto T&S TSSP-3125G-LR is a single-Channel, Pluggable, Fiber-Optical SFP28 for 25 Gigabit Ethernet...
SFP 10G LR
SFP 10G LR Продавец: Sumbexauto T&S TSPP-31192-LR is a Series single-mode, Pluggable Fiber-Optical SFP for 10G Ethernet, comp...
SC/SM/PC
SC/SM/PC Продавец: Sumbexauto ID 0.125/0.126mm, concentricity 1.0um, OD 2.4990mm, this kind of standard optical ferrules with g...
LC/SC LOOPBACK
LC/SC LOOPBACK Продавец: Sumbexauto LC or SC loopback or other customized, SM and MM fiber type for option, optical information routi...
IP LC/SC FIBER CABLE
IP LC/SC FIBER CABLE Продавец: Sumbexauto The IP connector together with supported cable is applied to 4G,5G, Base Station remote radios, a...