MTP/MPO LOOPBACK

• 

T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP/MPOloopback adaptercan transmit the optical network signal from the transmitter to the receiver, thereby forming the optical signal receiving and transmitting loop. MTP / MPO fiber loop provides a fast and efficient way to test the transmission capacity and receiving sensitivity of optical network equipment. T & S MTP / MPO fiber loop has 8F, 12F, 16F, 24F, 32F channels with low loss and conventional loss, single-mode and multi-mode options. Our MTP/MPO loopback adapter is now widely used for optical communications products self-test, network diagnosis, and test, etc.

Features of MTP/MPO Loopback Adapter

Available in various polarity and fiber types

Meet TIA/EIA and IEC interpretability standards

RoHS compliant

Customized attenuation available

Available with or without Pull tabs

8F , 12F, and 24fF available

Specifications of MTP/MPO Loopback

MTP Loopback with Housing and Pull-tab

The MTP loopback adapter occupies both ends of fiber in a duplex connector or a multi-fiber connector. This MTP lookback with housing and pull-tab can provide an effective solution so as to test the emission ability of the network equipment and receive sensitivity. Especially in 40/100G network communication, our MTP loopback devices can achieve optical fiber network in pairs on a single element or interface and conduct effective tests and evaluation of the Internet through back signal positioning.

MTP/MPO Lookback Adapter Applications

MTP®/MPO Loopback Adapter is used widely in testing applications within parallel optical 40Gbps and 100Gbps networks. The MTP loopback adapters enable verification and test of transceivers with MTP®/MPO interface like 40Gbps BASED SR4 QSFP+. MTP loopback adapters are developed to connect transceivers and a receiver port of the MTP®/MPO transceiver interface. MTP®/MPO loopback adapters do a great help in speeding up IL test of optical networks section by connecting them to an MTP®/MPO trunk.

Другие товары поставщика

	SC/SM/PC	ID 0.125/0.126mm, concentricity 1.0um, OD 2.4990mm, this kind of standard optical ferrules with good thermal stability, high precision and reliabil...
	FBG PRESSURE SENSOR	The Pressure of the transformer winding has an important influence on the short circuit ability of the transformer. Keeping a constant pressure is ...
	CEX WDM	T&S Cex-WDM is a kind of coexistence WDM product, which is mainly used in optical fiber access network. It can use EPON/GPON network of 1 to 2....
	PRE-TERMINATED MULTIFIBER CABLE	Pre terminated fiber cable assembliesconsist of optical fiber cable terminated with various types of connectors, such as the ST, FC, SC, LC, MU, MT...
	QSFP28 100G CWDM4 2K	QSFP28 100G CWDM4 2K The QSFP28 100G-CWDM4-2km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for hi...

Похожие товары

	MTUB43-90511B-12A20 Mini USB Female Connector	Продавец: MTCONN ELECTRONICS CO.,LTD	This model is a Mini USB R/A T/H DIP female connectorthat complied with RoHS certificate. It adop...
	Radar RD03	Продавец: Xi'an Interwiser Electronic Technology Co., Ltd	The RD03 low-altitude surveillance radaris a Ku-band phased array radar that adopts an all-solid-...
	IWRFSOC8X8 Xilinx RFSoC 3U 4-Channel/ DC-4GHz	Продавец: Xi'an Interwiser Electronic Technology Co., Ltd	InterWiser IWRFSOC8x8 3U algorithm evaluation modular systemdesigned for integration into deploye...
	IW-RFSOC-48DR-SYN Mixed Signal Processing Card	Продавец: Xi'an Interwiser Electronic Technology Co., Ltd	IW-RFSOC-48DR-SYN digital-analog mixed signal processing card, using Xilinx ZYNQ UltraScale + RFS...
	all kinds of Analytical Instruments	Продавец: O&K GROUP LIMITED	Okwishing поставляет все виды аналитических приборов. Okwishing () — это трансграничная пл...