MTP/MPO LOOPBACK
T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP/MPOloopback adaptercan transmit the optical network signal from the transmitter to the receiver, thereby forming the optical signal receiving and transmitting loop. MTP / MPO fiber loop provides a fast and efficient way to test the transmission capacity and receiving sensitivity of optical network equipment. T & S MTP / MPO fiber loop has 8F, 12F, 16F, 24F, 32F channels with low loss and conventional loss, single-mode and multi-mode options. Our MTP/MPO loopback adapter is now widely used for optical communications products self-test, network diagnosis, and test, etc.
Features of MTP/MPO Loopback Adapter
Available in various polarity and fiber types
Meet TIA/EIA and IEC interpretability standards
RoHS compliant
Customized attenuation available
Available with or without Pull tabs
8F , 12F, and 24fF available
Specifications of MTP/MPO Loopback
MTP Loopback with Housing and Pull-tab
The MTP loopback adapter occupies both ends of fiber in a duplex connector or a multi-fiber connector. This MTP lookback with housing and pull-tab can provide an effective solution so as to test the emission ability of the network equipment and receive sensitivity. Especially in 40/100G network communication, our MTP loopback devices can achieve optical fiber network in pairs on a single element or interface and conduct effective tests and evaluation of the Internet through back signal positioning.
MTP/MPO Lookback Adapter Applications
MTP®/MPO Loopback Adapter is used widely in testing applications within parallel optical 40Gbps and 100Gbps networks. The MTP loopback adapters enable verification and test of transceivers with MTP®/MPO interface like 40Gbps BASED SR4 QSFP+. MTP loopback adapters are developed to connect transceivers and a receiver port of the MTP®/MPO transceiver interface. MTP®/MPO loopback adapters do a great help in speeding up IL test of optical networks section by connecting them to an MTP®/MPO trunk.
Send product request
Other supplier products
 |
MTP/MPO TRUNK CABLE | MTPTrunkCABLE MTPtrunk cablesconnects MTP/MPO modules together as a permanent link. They facilitate rapid deployment of high-density backbone cab... |
 |
CEX WDM | T&S Cex-WDM is a kind of coexistence WDM product, which is mainly used in optical fiber access network. It can use EPON/GPON network of 1 to 2.... |
 |
40G QSFP+BREAKOUT AOC | T&SCommunication TSQSS-8540G-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 40 Gigabit Ethernet Applications. This trans... |
 |
PLC CHIP | PLC CHIP As a professional plc splitter manufacturer, T&S provides a wide range of different fiber optic components at reasonable prices. Based... |
 |
WAFER | PLC WAFER As an experienced plc splitter factory, T&S offers PLC splitter wafers as well. Based on Planar Lightwave Circuit technologies, PLC s... |
Same products
 |
MTUB43-90511B-12A20 Mini USB Female Connector | Seller: MTCONN ELECTRONICS CO.,LTD | This model is a Mini USB R/A T/H DIP female connectorthat complied with RoHS certificate. It adop... |
 |
Radar RD03 | Seller: Xi'an Interwiser Electronic Technology Co., Ltd | The RD03 low-altitude surveillance radaris a Ku-band phased array radar that adopts an all-solid-... |
 |
IWRFSOC8X8 Xilinx RFSoC 3U 4-Channel/ DC-4GHz | Seller: Xi'an Interwiser Electronic Technology Co., Ltd | InterWiser IWRFSOC8x8 3U algorithm evaluation modular systemdesigned for integration into deploye... |
 |
IW-RFSOC-48DR-SYN Mixed Signal Processing Card | Seller: Xi'an Interwiser Electronic Technology Co., Ltd | IW-RFSOC-48DR-SYN digital-analog mixed signal processing card, using Xilinx ZYNQ UltraScale + RFS... |
 |
all kinds of Analytical Instruments | Seller: O&K GROUP LIMITED | Okwishing supplies all kinds of Analytical Instruments. Okwishing() is a cross-border e-commerc... |
