TBM Disc Cutter
TBM disc cutteris a disc-shaped roller cutter mounted on the cutterhead of tunnel boring machine, which is an excavation tool for breaking hard rocks. The disc cutters can be mounted on the cutter heads of large trenchless construction equipment such as shield machines, TBMs, pipe jacking machines, shaft boring extension machines, and are widely used in subway tunnels, railway tunnels, diversion tunnels, urban underground pipe network construction, mining and other industries.
Litian has been conducting research on the materials, heat treatment process and manufacturing process of the TBM disc cutter components, combined with on-site testing to make improvements. As a result, the TBM disc cutters produced by Litian heavy industry has been in a leading position in the industry in terms of wear resistance, high temperature oxidation resistance, toughness. Litian TBM roller cuttercan adapt to the needs of multiple types of engineering, and can meet the requirements of long-distance excavation under the compound strata of highly weathered rock, moderately weathered rock, slightly weathered rock, and has good stability and reliability.
TBM Disc Cutter Types And Components
Single Disc Cutter
Single disc cutter is usually mounted on the face area and gauge area of cutter head. It is mostly used to break mixed ground and hard rock with high uniaxial compressive strength.
Double Disc Cutter
Double disc cutter is usually mounted on the face area and gauge area of cutter head, and is mostly used to break mixed ground and rock with low uniaxial compressive strength.
Twin Disc Cutter
Twin disc cutter is mounted on the center area of TBM cutter head, and is mostly used to break mixed ground and hard rock.
Triple Disc Cutter
Triple disc cutter is mainly used on micro-tunneling equipment and can be mounted at any position on the cutter head as required.
Disc Cutter Ring
TBM disc cutter ring is an indispensable part of the rolling disc cutter, and it is the first component that comes into contact with the rock.
Disc Cutter Components
Disc cutter is assembled from many components, such as cutter ring, hub, bearing, shaft, floating seal, end cover, etc.
Specifications Of Different TBM Disc Cutter
|
Cutter Type |
Diameter |
BearingCapacity [tonne] |
Structure |
|
|
[inch] |
[mm] |
|||
|
Single Disc Cutter Double Disc Cutter |
20" |
508 |
35, 42 |
Monoblock / Assembly |
|
19" |
483 |
35, 42 |
Monoblock / Assembly |
|
|
18" |
457 |
28 |
Monoblock / Assembly |
|
|
17" |
432 |
28, 32(single disk) |
Monoblock / Assembly |
|
|
15 1/2" |
394 |
22 |
Monoblock / Assembly |
|
|
Single Disc Cutter Double Disc Cutter Triple Disc Cutter |
12 1/2" |
320 |
16 |
Monoblock / Assembly |
|
12" |
305 |
16 |
Monoblock / Assembly |
|
|
11" |
280 |
13 |
Monoblock / Assembly |
|
|
10" |
250 |
10 |
Monoblock / Assembly |
|
|
9" |
220 |
9 |
Monoblock |
|
|
8" |
200 |
8 |
Monoblock |
|
|
7" |
180 |
8 |
Monoblock |
|
|
6 1/2" |
165 |
5 |
Monoblock |
|
|
6" |
150 |
4 |
Monoblock |
|
|
Twin Disc Cutter Center Disc Cutter |
18" |
457 |
42 |
Assembly |
|
17" |
432 |
45 |
Assembly |
|
|
15 1/2" |
394 |
45 |
Assembly |
|
|
13" |
330 |
40 |
Assembly |
|
|
12" |
305 |
35 |
Assembly |
|
TBM Disc Cutter Features
Our advanced CNC machine tools can ensure the consistency of the size of the cutter components. Combined with strict and standardized assembly process to ensure the torque of the hob. Adjust the torque in an appropriate range, so that it can well meet the requirements of the surrounding rock geology for the starting torque of the disc cutter, which is helpful to avoid partial wear of the disc cutters in different strata. We have a unique heat treatment process, which can meet the unity of wear resistance and toughness, and improve the service life of the hob.
Sealing system: The sealing system of our disc cutter adopts the world famous brand metal sealing system. During the assembly of the disc cutter, the distortion of the rubber ring may lead to air leakage, and this hidden danger is difficult to detect. We use special technology to assemble the disc cutter to correct the distortion of the rubber ring, eliminate the hidden danger of metal seal air leakage, and ensure the sealing reliability of the disc cutter.
Bearing system: Our disc cutter bearings are heavy-duty tapered roller bearings, which can bear the combined radial and axial load strength at the same time.
FAQs of TBM Disc Cutter
What is the working principle of TBM disc cutter?
TBM disc cutter is pressed on the rock surface to be broken by the hydraulic system of the machine. In the process of working, the disc cutter rotates around its own axis, and at the same time it revolves around the central axis of the cutter head as the cutter head rotates. Under the combined action of the rotating torque of the cutter head and the vertical thrust of the propulsion cylinder, the disc cutters distributed on the cutter head cut out a group of concentric circles on the tunnel face. When the compressive strength of the rock is lower than the thrust of the cutter head, the rock will be directly broken by the cutter blade, thus forming multiple concentric grooves. With the advance of the cutter head, the groove depth gradually deepens, and the blade penetrates into the rock, forming crushing zones and radial cracks. Under further pressure, when the hob spacing meets certain conditions, the surface crack of the adjacent rock mass expands gradually, and finally the rock between the adjacent concentric grooves collapses, and the rock breaking process of the disc cutters is completed.
What's your suggestion for TBM disc cutter replacement?
In the case of normal wear, we recommend that the disc cutter needs to be replaced when the cutter ring of gauge cutter is worn out about 10-15mm, and the cutter ring of face cutter and center cutter is worn out about 20-25mm. At this time, the cutting edge of the cutter ring becomes wider and its ability to cut rocks is reduced. The torque and thrust required for TBM tunneling will increase, which increases the load of the TBM hydraulic system and motor system, and the crushed rock will also wear the cutter head, thereby reducing the service life of the TBM.
Now the price of rock drilling tools chinais affordable, if you have needs to buy top hammer rock drilling tools, please leave us a message.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Extension Rod | Extension rod, with male threads at both ends, connects with a shank adapter through a coupling sleeve. Rock drill extension rodcan divide into r... |
 |
Raise Boring Cutters | Raise boring cutter (RBM cutter) is a tungsten carbide insert roller cutter mounted on the reaming head of raise boring machine (RBR, raise borer),... |
 |
Quarrying & Aggregate | Top hammer rock drilling tools chinafor Quarrying and Aggregate industry In quarry and aggregate industries, the application of top-hammer rock ... |
 |
MF Rod | MF rod, also known as speed drill rod, has a male thread at one end and a female thread at the other end. It can directly connect to the shank adap... |
 |
PD200 T38 380mm Shank Adapter | Product Details： Product Name: PD 200 threaded shank adapter Place of Origin: China Brand Name: LITIAN Certification: ISO9001:2015 M... |
Похожие товары
 |
ABB Bailey Analog Input Module IMASI13 | Продавец: 840499 | 监控温度、压力、流量和液位等过程变量与传感器和变送器接口数据采集和记录工业自动化任务 制造商：ABB、Bailey型号：ABB Bailey Infi 90、ABB Bailey Infi 90... |
 |
Embedded Systems Programming Industrial ARM Edge Computer Controller ARMxy | Продавец: она Нженбе iLai Technology Co.,Ltd. | The ARMxy BL330 series is a versatile industrial ARM controller designed for flexibleI/O configur... |
 |
Indutrial IoT Embedded ARM Controller Optional GPIO DI DO Relay Module | Продавец: она Нженбе iLai Technology Co.,Ltd. | The ARMxy BL330 series is a versatile industrial ARM controller designed for flexibleI/O configur... |
 |
High performance T113-i Chip 1+8CB eMMC AR Edge Computer Support Secondary Development | Продавец: она Нженбе iLai Technology Co.,Ltd. | The ARMxy BL330 series is a versatile industrial ARM controller designed for flexibleI/O configur... |
 |
4DI+4D0 Wireless 4G 5G ARM Embedded Edge Gateway for Industrial Remote Monitoring | Продавец: она Нженбе iLai Technology Co.,Ltd. | The ARMxy BL330 series is a versatile industrial ARM controller designed for flexibleI/O configur... |
