EDM Spark
Electrical Discharge Machining ServicesSpark
During the EDM process, an electric current crosses the gap between the electrode and the workpiece (spark gap) to erode and remove material from the workpiece. An EDM discharge pulse contains an on time and an off time element to complete a complete cycle. If the off time element is not sufficient to discharge the condensed debris, the spark gap reionization process will be very unstable due to the conductive debris floating in the gap region. If the spark gap ionization process is not properly controlled, a direct short circuit of discharge energy or an arc discharge (discharge energy concentrated to a single point instead of uniformly dispersed over the entire electrode surface) may occur, which may result in damage to the workpiece.
The EDM discharge process is a delicate balance in which the generator constantly adjusts and changes the on and off time values to stabilize the process, which is why the EDM process does not run at the set feed rate.
How Spark is Created in the EDM?
Electrical edm discharge machining(EDM), also known as spark machining, spark eroding, die sinking, wire burning or wire erosion, is a metal fabrication process whereby a desired shape is obtained by using electrical discharges (sparks).The electrodes are divided by the dielectric liquid. Once the voltage increases, the electrical strength between the electrodes expands, causing the dielectric fluid to rupture, and leaving an arc in its place.
EDM Spark Capability
|
Roughing |
The number of sparks during roughing is low, but each spark has a high energy and generates a lot of over burning. The roughing process achieves rougher surface finishes and lower precision levels. |
|
Finishing process |
Finishing achieves lower material removal rates and less over burning, but also produces finer/smoother surface finishes and higher accuracy. The finishing process is used after the roughing process, minimizing the amount of material that must be removed for the finishing operation. |
As one of electrical discharge machining manufacturers, we can provide kinds of electrical discharge machine for sale, and the electrical discharge machining costis reasonable, if you have needs, please contact us.
We are one of the leading precision machining suppliersin China, committed to manufacturing the best prototypes and precision parts for a wide range of industries, including Artificial Intelligence, Automation Industry, New energy industry, Transportation industry, Internet Communication, Smart Home, Environmental Protection, Fixture & Tooling.
If you want to know more about precision machining and surfacingservice, please visit our website.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Rubber Prototyping Parts | Liquid silicone rubber (LSR) molding is a form of injection molding. The liquid silicone rubber is first injected into the mold, then the liquid is... |
 |
CNC Machining Material | Metal Material Machining Aluminum Alloys Aluminum alloy material is divided into: 6061 mainly contains magnesium and silicon elements, suitable... |
 |
PEEK Non-standard Parts | PEEK Non-standard Parts PEEK material is a new type of semi-crystalline aromatic plastic engineering plastics, with extremely good physical and mec... |
 |
CNC Milling | CNC Milling CNC Milling is the ideal method for rapid prototyping and for batch manufacturing of plastics and metals. As a cnc milling service sup... |
 |
POM Non-standard Parts | Polyacetal ( POM ) properties for crystalline thermoplastic, with an apparent melting point of 165 ~ 175 ℃, the nature of the closest to the metal,... |
