EDM Spark
Electrical Discharge Machining ServicesSpark
During the EDM process, an electric current crosses the gap between the electrode and the workpiece (spark gap) to erode and remove material from the workpiece. An EDM discharge pulse contains an on time and an off time element to complete a complete cycle. If the off time element is not sufficient to discharge the condensed debris, the spark gap reionization process will be very unstable due to the conductive debris floating in the gap region. If the spark gap ionization process is not properly controlled, a direct short circuit of discharge energy or an arc discharge (discharge energy concentrated to a single point instead of uniformly dispersed over the entire electrode surface) may occur, which may result in damage to the workpiece.
The EDM discharge process is a delicate balance in which the generator constantly adjusts and changes the on and off time values to stabilize the process, which is why the EDM process does not run at the set feed rate.
How Spark is Created in the EDM?
Electrical edm discharge machining(EDM), also known as spark machining, spark eroding, die sinking, wire burning or wire erosion, is a metal fabrication process whereby a desired shape is obtained by using electrical discharges (sparks).The electrodes are divided by the dielectric liquid. Once the voltage increases, the electrical strength between the electrodes expands, causing the dielectric fluid to rupture, and leaving an arc in its place.
EDM Spark Capability
|
Roughing |
The number of sparks during roughing is low, but each spark has a high energy and generates a lot of over burning. The roughing process achieves rougher surface finishes and lower precision levels. |
|
Finishing process |
Finishing achieves lower material removal rates and less over burning, but also produces finer/smoother surface finishes and higher accuracy. The finishing process is used after the roughing process, minimizing the amount of material that must be removed for the finishing operation. |
As one of electrical discharge machining manufacturers, we can provide kinds of electrical discharge machine for sale, and the electrical discharge machining costis reasonable, if you have needs, please contact us.
We are one of the leading precision machining suppliersin China, committed to manufacturing the best prototypes and precision parts for a wide range of industries, including Artificial Intelligence, Automation Industry, New energy industry, Transportation industry, Internet Communication, Smart Home, Environmental Protection, Fixture & Tooling.
If you want to know more about precision machining and surfacingservice, please visit our website.
Send product request
Other supplier products
 |
Stainless Steel Precision Spare Parts | Steel is the most widely used and recycled metal material on the planet. From stainless and high-temperature steels to flat carbon products, steel ... |
 |
Punches and Bushings Parts | Punches and Bushings Parts When punching holes with a concave die, the standard of hole diameter is based on the diameter of the convex die. For ex... |
 |
Metal Stamping Parts | Metal Stamping Components Most of the world's steel is made into finished products by stamping. The body, chassis, fuel tank and radiator sheet of... |
 |
Brass Non-standard Parts | Brass Non-standard Parts Brass is an alloy of copper and zinc. Brass consisting of copper and zinc is called common brass, which has high strength... |
 |
Non-standard Parts | Standard parts are parts produced in accordance with national standards (GB), industry standards, or foreign standards, mainly for the convenience ... |
