Tungsten Rod
HSG METAL is a professional tungsten rod manufacturer and tungsten rod factoryin China. Pure tungsten rod is made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min. The forging and annealing process results can be obtained by test. It possesses special properties such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus. The products made from tungsten are widely used in various fields, such as support line, lead line, printer needle, all kinds of electrodes and quartz furnace, filament, high-speed tools, auto products, sputtering target material, heating device with special properties. It is generally made by powder metallurgy. Contact our tungsten rodmanufacturer for the latest price!
Specification of Tungsten Rod
iameter(mm) |
Black tungsten rod |
Polished tungsten rod |
Custom length tolerance(mm) |
||
Diameter tolerance (%) |
circular degree |
Diameter tolerance (%) |
circular degree |
||
±2 |
2 |
±0.03 |
L≤50±0.5 |
||
±2 |
2 |
±0.05 |
50<L≤100±1.0 |
||
±2 |
2 |
±0.08 |
100<L≤300±1.5 300<L≤500±2.0 |
||
±2 |
2 |
±0.15 |
±0.15 |
500<L≤1000±2.5 |
|
±2 |
2 |
±0.25 |
±0.25 |
1000<L≤2000±5 |
Application of Tungsten Rod
Tungsten rods possess special properties, such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus. Therefore, tungsten rods are widely used in various fields. Such as support line, lead line, printer needle, various electrodes and quartz furnace, filament, high speed tools, automotive automatic products, sputter target material.
Production Process of Tungsten Rod
Different average forging ratios and forging methods were used to draw the sintered pure tungsten bar, and the annealed tungsten bar was annealed under different annealing systems. The microstructure and physical and mechanical properties of the samples were analyzed by metallographic microscope, hardness tester and density tester. The results showed that:
When the total forging ratio is about 80%, the recrystallization of the tungsten rod forged at one end of one fire is basically completed after annealing at 1300℃ for 30 min, while the recrystallization of the tungsten rod forged at both ends of one fire is completed after annealing at 1350℃ for 60 min when the average forging ratio is larger. After annealing, the hardness of tungsten bars with the two forging processes will decrease, and the hardness of tungsten bars with the former process is less than that with the latter process before annealing and at the early stage of annealing, and this difference is no longer obvious with the completion of recovery recrystallization.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Ferro Tungsten | HSG METAL, as one of ferro tungsten suppliers, provides ferro tungsten for sale. Ferrotungsten belongs to the ferro wolframseries. Ferro tungste... | |
Indium Ingot | CAS 7440 74 6 indium ingots for sale. Soft enough to score with your nails. Good ductility, no work hardening phenomenon during pressure process... | |
Services | Bioanalytical Service Bioanalytical Service for Small Molecule Drugs and Metabolites, Large Molecules – Peptides and Proteins, etc. LCMSMS Q... | |
Minor Metals | Non-ferrous metals are divided into basic metals and minor metals. Minor metals are called minor metals because they are relatively small units. ... | |
Niobium Tube | Niobium and niobium alloy tubes, rods and wires are widely used in chemistry, electronics, aviation and aerospace because of their high melting poi... |
Похожие товары
Chain Link Fence | Продавец: Hebei Shineyond Metal Products Co.,Ltd | Also known as diamond wire mesh, sloping square mesh. Hooked wire mesh is made by crocheting, its... | |
Torsion Spring Clip | Продавец: ningbo atlas metal hardware co ltd | Torsion Spring Clip We manufacture close tolerance parts with complex geometries, intricate deta... | |
Torsion Spring | Продавец: ningbo atlas metal hardware co ltd | Torsion Spring A torsion springis a spring that works by twisting its end along its axis; that i... | |
Threaded Parts | Продавец: ningbo atlas metal hardware co ltd | Threaded Parts We have rich experience in machining stainless steel, Titanium alloy, aluminium, ... | |
Tension Spring | Продавец: ningbo atlas metal hardware co ltd | Adjustable Tension Spring Tension springs are wound helical coils that are wrapped tightly toget... |