Tungsten Rod
HSG METAL is a professional tungsten rod manufacturer and tungsten rod factoryin China. Pure tungsten rod is made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min. The forging and annealing process results can be obtained by test. It possesses special properties such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus. The products made from tungsten are widely used in various fields, such as support line, lead line, printer needle, all kinds of electrodes and quartz furnace, filament, high-speed tools, auto products, sputtering target material, heating device with special properties. It is generally made by powder metallurgy. Contact our tungsten rodmanufacturer for the latest price!
Specification of Tungsten Rod
|
iameter（mm） |
Black tungsten rod |
Polished tungsten rod |
Custom length tolerance(mm) |
||
|
Diameter tolerance (%) |
circular degree |
Diameter tolerance (%) |
circular degree |
||
|
±2 |
2 |
±0.03 |
L≤50±0.5 |
||
|
±2 |
2 |
±0.05 |
50<L≤100±1.0 |
||
|
±2 |
2 |
±0.08 |
100<L≤300±1.5 300<L≤500±2.0 |
||
|
±2 |
2 |
±0.15 |
±0.15 |
500<L≤1000±2.5 |
|
|
±2 |
2 |
±0.25 |
±0.25 |
1000<L≤2000±5 |
Application of Tungsten Rod
Tungsten rods possess special properties, such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus. Therefore, tungsten rods are widely used in various fields. Such as support line, lead line, printer needle, various electrodes and quartz furnace, filament, high speed tools, automotive automatic products, sputter target material.
Production Process of Tungsten Rod
Different average forging ratios and forging methods were used to draw the sintered pure tungsten bar, and the annealed tungsten bar was annealed under different annealing systems. The microstructure and physical and mechanical properties of the samples were analyzed by metallographic microscope, hardness tester and density tester. The results showed that:
When the total forging ratio is about 80%, the recrystallization of the tungsten rod forged at one end of one fire is basically completed after annealing at 1300℃ for 30 min, while the recrystallization of the tungsten rod forged at both ends of one fire is completed after annealing at 1350℃ for 60 min when the average forging ratio is larger. After annealing, the hardness of tungsten bars with the two forging processes will decrease, and the hardness of tungsten bars with the former process is less than that with the latter process before annealing and at the early stage of annealing, and this difference is no longer obvious with the completion of recovery recrystallization.
Send product request
Other supplier products
 |
Molybdenum Crucible | Molybdenum Crucible Molybdenum crucible is widely used in metallurgy, chemical industry and rare earth manufacturing enterprises as a container fo... |
 |
Molybdenum Rod | HSG molybdenum bar supplier provides the pure molybdenum bar for sale with molybdenum content greater than 99.95%. Also, as a molybdenum rod sup... |
 |
Molybdenum Scrap | Revivification of Molybdenum refers to a process in which Molybdenum is obtained from waste materials including waste catalysts, Molybdenum compoun... |
 |
Ferro Niobium | Ferroniobium an iron alloy with niobium and iron as its principal components. It also contains impurities such as aluminum, silicon, carbon, sulfur... |
 |
Niobium Wire | Niobium wire is cold worked from the ingots to the final diameter. The typical working process is forging, rolling, swaging, and drawing. Niobium... |
Same products
 |
Chain Link Fence | Seller: Hebei Shineyond Metal Products Co.,Ltd | Also known as diamond wire mesh, sloping square mesh. Hooked wire mesh is made by crocheting, its... |
 |
Torsion Spring Clip | Seller: ningbo atlas metal hardware co ltd | Torsion Spring Clip We manufacture close tolerance parts with complex geometries, intricate deta... |
 |
Torsion Spring | Seller: ningbo atlas metal hardware co ltd | Torsion Spring A torsion springis a spring that works by twisting its end along its axis; that i... |
 |
Threaded Parts | Seller: ningbo atlas metal hardware co ltd | Threaded Parts We have rich experience in machining stainless steel, Titanium alloy, aluminium, ... |
 |
Tension Spring | Seller: ningbo atlas metal hardware co ltd | Adjustable Tension Spring Tension springs are wound helical coils that are wrapped tightly toget... |
