Cold Runner & Hot Runner Plastic Mold

• 

Generally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensing wire is commonly known as the "thermocouple", and there are many types, but hot runner thermocouple has two types: standard type J and type K.

COLD RUNNER & HOT RUNNER PLASTIC MOLD TYPES

Multi Cavities Hot Runner and Cold Runner Mould

The hot runner will keep the plastic material in liquid in runner and injection gate, the temperature in injection machine barrel and runner are very high which can keep the material in liquid, due to there is heating system surrounded, it will only need to heat the hot runner to request temperature before production, and the hot runner is like the extension of injection machine barrel.

Cold Runner Mould

Compared with the hot runner mould, a cold runner mold does not require a special heating system for the runner system. It will be cooled with the product together and taken out after injection finishing, and then cut the runner, the cold runner injection moldingmold is what we often call the traditional mold.

Switch Cover Injection Mold

The K-type thermocouple is a metal thermocouple with strong oxidation resistance, which can measure the medium temperature of 0~1300℃, suitable for continuous use in oxidizing and inert gases, the short-term use temperature is 1200°C, and the long-term use temperature is 1000°C, the relationship between thermoelectric potential and temperature is approximately linear, and it is currently the biggest thermocouple.

Transparent PC Injection Mold

Type-J thermocouple, the positive electrode of this thermocouple is pure iron, and the negative electrode is constant (copper-nickel alloy).

Common Hot Runner Plastic InjectionTemperature Sensing Wires Types And Characteristics

However, the basic principle is to use the corresponding relationship of a certain material to temperature changes, and a closed-loop is formed by two different component material conductors, when there is a temperature gradient at both ends, at this time, there is the electromotive force-term electromotive force between the two ends, which is called "Seebeck effect". After the electric potential signal is amplified by the amplifying circuit, it is converted into an AD signal and displayed by LED or pointer, thermocouple is one of the commonly used temperature detection elements in the industry.

If you want to know more types of runner in mould, please visit our website.

As one of custom plastic parts manufacturers, we can offer sorts of related products for sale, if you have needs, please contact us.

USM is one of the world's leading manufacturers of plastic injection mould and molded parts,medical moldingmanufacturing. We have always pushed developments forward and set benchmarks in Automotive, High precision, and 2K molding, and other industrial parts.

Другие товары поставщика

	Plastic Switch Mould	Most of the smart home appliance products are electrical products and need to be connected with strong and weak electricity, most of the inner and ...
	Insert Mold	Insert Moulding Design USM molds focus on structural parts injection molds, gas-assisted and water-assisted injection mold, small parts plastic ...
	Water Proof Plastic Enclosure Mold	Water Proof Plastic Enclosure Mold Both the overmolding and two-color molding are injected by two different materials one by one, then get one w...
	Transparent PC Injection Mold	It is the most widely used thermocouple in the hot runner system, and it is characterized by low price and is suitable for vacuum oxidation in redu...
	Gas & Water Assisted Injection Mold	Gas & Water assisted injection molding Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injecti...

Похожие товары

	Medical Plastic Parts	Продавец: Packson Mold Co.,Ltd	Project Management To be a qualified medical plastic components manufacturer, the most advanced ...
	PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics	Продавец: Suzhou Anmei Material Technology Co., Ltd	PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol...
	PA66 GF	Продавец: Suzhou Anmei Material Technology Co., Ltd	Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif...
	Nylon6 PA6	Продавец: Suzhou Anmei Material Technology Co., Ltd	Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o...
	Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics	Продавец: Suzhou Anmei Material Technology Co., Ltd	Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a...