Cold Runner & Hot Runner Plastic Mold
Generally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensing wire is commonly known as the "thermocouple", and there are many types, but hot runner thermocouple has two types: standard type J and type K.
COLD RUNNER & HOT RUNNER PLASTIC MOLD TYPES
Multi Cavities Hot Runner and Cold Runner Mould
The hot runner will keep the plastic material in liquid in runner and injection gate, the temperature in injection machine barrel and runner are very high which can keep the material in liquid, due to there is heating system surrounded, it will only need to heat the hot runner to request temperature before production, and the hot runner is like the extension of injection machine barrel.
Cold Runner Mould
Compared with the hot runner mould, a cold runner mold does not require a special heating system for the runner system. It will be cooled with the product together and taken out after injection finishing, and then cut the runner, the cold runner injection moldingmold is what we often call the traditional mold.
Switch Cover Injection Mold
The K-type thermocouple is a metal thermocouple with strong oxidation resistance, which can measure the medium temperature of 0~1300℃, suitable for continuous use in oxidizing and inert gases, the short-term use temperature is 1200°C, and the long-term use temperature is 1000°C, the relationship between thermoelectric potential and temperature is approximately linear, and it is currently the biggest thermocouple.
Transparent PC Injection Mold
Type-J thermocouple, the positive electrode of this thermocouple is pure iron, and the negative electrode is constant (copper-nickel alloy).
Common Hot Runner Plastic InjectionTemperature Sensing Wires Types And Characteristics
However, the basic principle is to use the corresponding relationship of a certain material to temperature changes, and a closed-loop is formed by two different component material conductors, when there is a temperature gradient at both ends, at this time, there is the electromotive force-term electromotive force between the two ends, which is called "Seebeck effect". After the electric potential signal is amplified by the amplifying circuit, it is converted into an AD signal and displayed by LED or pointer, thermocouple is one of the commonly used temperature detection elements in the industry.
If you want to know more types of runner in mould, please visit our website.
As one of custom plastic parts manufacturers, we can offer sorts of related products for sale, if you have needs, please contact us.
USM is one of the world's leading manufacturers of plastic injection mould and molded parts,medical moldingmanufacturing. We have always pushed developments forward and set benchmarks in Automotive, High precision, and 2K molding, and other industrial parts.
Send product request
Other supplier products
 |
Auto Parts Mould | Automotive Parts Mold Molded automotive parts features: 1. The part material is made by PP-TD20 normally, the part surface will make leather textu... |
 |
Automotive Window Frame Mould | Automotive Window Frame Mould Automotive car window mouldhas many advantages including: As a custom plastic molding company, we can offer s... |
 |
Insert Mold | Insert Mold USM molds focus on structural insert moulding products, gas-assisted water-assisted molds, small parts plastic molds, precision plasti... |
 |
Car Door Mold | Car Window Mould Automotive Door Bracket Mold can shorten the fixture wasting(the fixture will improve the slight deformation) and it has very goo... |
 |
TV Frame Mold | TV Mold USM team has over 16 years of rich experience in gas-assisted mold manufacturing and mold trial, which can satisfy the mold making and i... |
Same products
 |
Medical Plastic Parts | Seller: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | Seller: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
 |
Nylon6 PA6 | Seller: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
