Trimethylchlorosilane (M3)

Name:

Trimethylchlorosilane

Feature:

Trimethyl chloro silaneis a colorless or light yellow transparent irritating liquid.

Trimethylchlorosilane CASNO.: 75-77-4

Technical Data of Trimethylchlorosilane

Testing Items	Testing Standards
Trimethylchlorosilane /%	≥ 99.5
Methyltrichlorosilane /%	≤ 0.05
Tetrachlorosilane /%	≤ 0.05

Description of Trimethylchlorosilane

Trimethylchlorosilane is colorless transparent liquid, and it is volatile, easily hydrolyzed in humid air to free hydrochloric acid. It is soluble in benzene, ether and perchloroethylene. Besides, trimethylchlorosilane is flammable, toxic and corrosive. Sealed and stored in a cool and dry place. Store in a low temperature ventilated place, away from fire and heat source. Separate storage and transportation with oxidizers, acids and bases.

Trimethylchlorosilane Uses

Trimethylchlorosilane is mainly used in the production of end-capping agent MM, silazane, cephalosporins antibiotics, active group protectors, etc.

Storage and Transportation of Trimethylchlorosilane

Storage: Stored in a shady, cool, and ventilated place. It should be kept away from kindling and heat sources, avoid direct sunlight.

Transportation: When transported, avoid rain and direct sunshine.

Health Hazards of Trimethylchlorosilane

Invasion route: inhalation, ingestion, transdermal absorption.

Health hazards of trimethylchlorosilane: Strong irritation to respiratory tract and eyes, skin mucous membrane. Inhalation can cause death due to spasm and edema of larynx and bronchus, chemical pneumonia, pneumonia and pulmonary edema. Exposed workers often have eye pain, tearing, coughing, headache, nausea, vomiting, wheezing, easily agitated, and itchy skin.

Toxicological information and environmental behavior

Hazardous characteristics of trimethylchlorosilane: Flammable, in contact with high heat, open flame or with oxidizing agents, there is a risk of causing combustion and explosion. Release toxic and corrosive fumes when heated or exposed to moisture liberation heat. Corrosive.

Combustion (decomposition) products: carbon monoxide, carbon dioxide, silicon oxide, hydrogen chloride.

Leakage Emergency Treatment of Trimethylchlorosilane

Quickly evacuate personnel from the leaking contaminated area to a safe area, and isolate and strictly limit access.

Cut off the source of fire.

It is recommended that emergency response personnel wear self-contained positive pressure respirators and fire protective clothing.

Do not come into direct contact with the spill.

Cut off the source of the spill as much as possible and prevent access to restricted spaces such as sewers and drainage ditches.

Small leakage: mix with sand, dry stone type or soda ash. You can also brush the emulsion with non-flammable dispersant making surface, and dilute the washing solution into the wastewater system.

Large amount of leakage: Construct a dike or dig a pit to shelter. Cover with foam to reduce vapor disaster. Transfer to tanker or special collector with explosion-proof pump, recycle or transport to waste disposal site for disposal.

ZhongtianEast Fluorine Silicon Material Co., Ltd. mainly engaged in organic silicon monomer, research and development of fluorine silicon new materials and silicone sealant.

Другие товары поставщика

	Silicone Rubber (HTV)	HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen b...
	Silicone Window & Door Sealant	Name: Silicone Window Sealant& Door Sealant Features: One component, neutral, room temperature curing building silicone sealant, and non-cor...
	Fumed Silica	Name: Fumed silica Appearance: Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen ads...
	Chlorosilane	Chlorosilanes are a class of liquids that range in color from clear colorless to light yellow colored. A clear to light yellow liquid. Slightly mor...
	Silicone Sealant	ZhongtianEast Fluorine Silicon Material Co.,silicone sealant manufacturers,Ltd., mainly engaged in organic silicon monomer, research and developmen...

Все товары поставщика

Похожие товары

	Thermoset Molding	Продавец: WIT MOLD LIMITED	Thermoset Molding Key Aspects of Thermoset Molding Materials: Thermosetting Polymers:These inc...
	UNSCREWING MOLDS	Продавец: WIT MOLD LIMITED	UNSCREWING MOLDS Unscrewing moldis a type of mold used in injection molding, primarily for produ...
	dsa anode	Продавец: Baoji Giant Technology Materials Co., Ltd	dsa anode DSA Anode , also known as dimensionally stable anodes, are titanium or niobium su...
	mmo electrode	Продавец: Baoji Giant Technology Materials Co., Ltd	mmo electrode MMO Electrode is the process of using electricity to break down water into hy...
	anode for printed circuit board	Продавец: Baoji Giant Technology Materials Co., Ltd	anode for printed circuit board Acid electrolytic copper plating is an important step in t...