Trimethylchlorosilane (M3)
Name:
Trimethylchlorosilane
Feature:
Trimethyl chloro silaneis a colorless or light yellow transparent irritating liquid.
Trimethylchlorosilane CASNO.: 75-77-4
Technical Data of Trimethylchlorosilane
|
Testing Items |
Testing Standards |
|
Trimethylchlorosilane /% |
≥ 99.5 |
|
Methyltrichlorosilane /% |
≤ 0.05 |
|
Tetrachlorosilane /% |
≤ 0.05 |
Description of Trimethylchlorosilane
Trimethylchlorosilane is colorless transparent liquid, and it is volatile, easily hydrolyzed in humid air to free hydrochloric acid. It is soluble in benzene, ether and perchloroethylene. Besides, trimethylchlorosilane is flammable, toxic and corrosive. Sealed and stored in a cool and dry place. Store in a low temperature ventilated place, away from fire and heat source. Separate storage and transportation with oxidizers, acids and bases.
Trimethylchlorosilane Uses
Trimethylchlorosilane is mainly used in the production of end-capping agent MM, silazane, cephalosporins antibiotics, active group protectors, etc.
Storage and Transportation of Trimethylchlorosilane
Storage: Stored in a shady, cool, and ventilated place. It should be kept away from kindling and heat sources, avoid direct sunlight.
Transportation: When transported, avoid rain and direct sunshine.
Health Hazards of Trimethylchlorosilane
Invasion route: inhalation, ingestion, transdermal absorption.
Health hazards of trimethylchlorosilane: Strong irritation to respiratory tract and eyes, skin mucous membrane. Inhalation can cause death due to spasm and edema of larynx and bronchus, chemical pneumonia, pneumonia and pulmonary edema. Exposed workers often have eye pain, tearing, coughing, headache, nausea, vomiting, wheezing, easily agitated, and itchy skin.
Toxicological information and environmental behavior
Hazardous characteristics of trimethylchlorosilane: Flammable, in contact with high heat, open flame or with oxidizing agents, there is a risk of causing combustion and explosion. Release toxic and corrosive fumes when heated or exposed to moisture liberation heat. Corrosive.
Combustion (decomposition) products: carbon monoxide, carbon dioxide, silicon oxide, hydrogen chloride.
Leakage Emergency Treatment of Trimethylchlorosilane
Quickly evacuate personnel from the leaking contaminated area to a safe area, and isolate and strictly limit access.
Cut off the source of fire.
It is recommended that emergency response personnel wear self-contained positive pressure respirators and fire protective clothing.
Do not come into direct contact with the spill.
Cut off the source of the spill as much as possible and prevent access to restricted spaces such as sewers and drainage ditches.
Small leakage: mix with sand, dry stone type or soda ash. You can also brush the emulsion with non-flammable dispersant making surface, and dilute the washing solution into the wastewater system.
Large amount of leakage: Construct a dike or dig a pit to shelter. Cover with foam to reduce vapor disaster. Transfer to tanker or special collector with explosion-proof pump, recycle or transport to waste disposal site for disposal.
ZhongtianEast Fluorine Silicon Material Co., Ltd. mainly engaged in organic silicon monomer, research and development of fluorine silicon new materials and silicone sealant.
Send product request
Other supplier products
 |
Weather-resistant Adhesive For Neutral Curtainwall | Name: Weather-resistant Adhesive For Neutral Curtainwall Feature: GS885 is one component, neutral cure silicone adhesive. It curing quickly, h... |
 |
Octamethylcyclotetrasiloxane (D4) | Product Name: D4 Silicone Octamethylcyclotetrasiloxane Molecular Formula: (CH3 ) 8 Si4 O4 OctamethylcyclotetrasiloxaneCASNo.: 556-67-2 Physica... |
 |
Silicone Window & Door Sealant | Name: Silicone Window Sealant& Door Sealant Features: One component, neutral, room temperature curing building silicone sealant, and n... |
 |
Silicone Window & Door Sealant | Zhongtian East Fluorine Silicon Material Co., Ltd.,a silicone products manufacturer, mainly engaged in organic silicon monomer, research and develo... |
 |
Silicone Rubber (HTV) | HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen b... |
