300 ton bridge erecting cranes beam launcher machine for subway bridge construction

• 

Product Description

300 ton bridge erecting cranes beam launcher machine

300 ton bridge erecting cranes beam launcher machineis used in the erection of precast beam bridges for span by span method of construction for precast beam girders like T beam, U beam, etc. This self-beam launcher is suitable for bridge construction over river, valley or highway and so on.

300 ton bridge erecting cranes beam launcher machineis suitable for the construction of bridge for roads, railways and other bridge erection construction site. Its main function is to lift the prefabricated beams, then transported onto the prefabricated pier. It has big difference from the general cranes. It requests high security.

Packing
1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying.
2. Main beams, end beams and electric hoist are packed by plastic woven cloth. It can reduce abrasion when transport.

Delivery
1. If the size of300 ton bridge erecting cranes beam launcher machineare suitable for container ship, usually by container.
2. If the size is too big, usually by bulk ship or by container after truncation; Transport ways are based on reducing cost for you and keep the crane performance.

Delivery time
Within 30 to 40 working days after the receipt of deposit.

Transportation
Generally 35 days to 50 days to destination port.

FAQ

1. What’stheinformationshouldIprovidewheninquiry about the300 ton bridge erecting cranes beam launcher machine?
1.1 We need the Bridge Drawing, the Maximum longitudinal slope and the Maximum Transverse slope.
1.2 The Girder/beam drawing.

2.What are inspection standard for load test of 300 ton bridge erecting cranes beam launcher machine?
2.1 Dynamic load test
1.1 times rated load, main girder does not down deflection, all mechanisms work well, performance parameters meet the design demand, all limit switches and safety protection interlock devices are reliable, all spare parts does not have cracking and flexible connection, all motors and contactors are not overheat.

2.2 Static load test
1.25 times rated load, all mechanisms work well, the crane stops 20-30 min as trial load is lifted 10 cm high, then measure main girder down deflection(theodolite, ruler). Put down trial load to measure main girder upper camber, repeat 3 times, steel structure does not have permanent deformation;

3. How to make highway bridge concrete girders?
a. Full span prefabrication.
b. Segment girder prefabrication.
c. Full span cast-in-place girder.
d. Segment cast-in-situ.

4. How about maintenance of 300 ton bridge erecting cranes beam launcher machine?
4.1 Lubricating: Working performance and service life of all mechanisms of crane depend on lubricating to a big extent.

4.2 Steel wire rope: Fracture of wire has to be specially noticed. A new steel wire rope has to be changed immediately with the condition of broken wire, broken strands and wear loss to scrapping standard.
4.3 Spreader: The spreader has to be checked regularly.
4.4 Pulley block: Mainly check rope race wearing condition, check whether wheel flange is cracked and whether pulley could get stuck in the axle or not.
4.5 Wheels: Regularly check wheel flange and tread, a new wheel has to be immediately replaced as crack part or wearing in wheel flange reaches 10% of wheel thickness; Re-polishing has to be done as diameters between two driving wheels on tread differs more than D/600, or there are severe scar on the tread.
4.6 Brake: Check one time per shift; The brake should be in accurate movement, and pins do not allow to be stuck. Brake shoes shall fit brake wheels correctly; the brake shoes interval shall be equal to open them.

5. How many Personnel and equipment to assemble 300 ton bridge erecting cranes beam launcher machinein the worksite we need?
Personnel: 8 to 10 workers equipment
Truck crane > 50 t : 2 sets
Φ19.5 steel wire rope 8 m: 4 ropes
Sleepers: several
Electric welding machine: 1 set
Oxygen, acetylene: 1 set
Hammer(12 pound and 8 pound): 1 set for each
Wrench and pincher: several
Gradienter: 1 set

Другие товары поставщика

	Новый дизайн лодки подъемный кран яхты обработки машины лодки подъема gantry крана	Описание продукта Новый дизайн лодки подъемный кран яхты обработки машины лодки подъема gantry крана Новый дизайн лодки подъемный кран яхты обработ...
	МЗ 5 тонн 10 тонн одного балка полузасушливых Gantry краны 20 тонн Цена	МХ 5 тонн 10 тонн одной балки полу Gantry краны 20 тонн цена является своего рода легкий тип крана, обычно используется в современной продукции.В м...
	Регулируемая высота портативный мини мобильный кран gantry	Описание продукта Регулируемая высота портативного мини-мобильного крана gantry является своего рода средне-легкий кран, с CD, MD, HC типа электрич...
	высококачественный мост транспортер луч тележки	Описание продукта: Высококачественная тележка мостовой балки имеет характеристику для перевозки большой вместимости, самоходных, транспорта без огр...
	drawing customized 300 ton bridge building beam launcher construction to move girder	Product Description 300 ton bridge building beam launcher construction is used in the erection of precast beam bridges for span by span me...

Похожие товары

	Cement Look	Продавец: Guangdong Dacheng Ceramics Co., Ltd.	Cement Look Urban Cement, back to nature, restore the foundation of cement, use the most simple ...
	Marble	Продавец: Guangdong Dacheng Ceramics Co., Ltd.	Marble The design inspiration of the Bvlgari Series traces deeply to the cultural treasures of a...
	Australian Seastone	Продавец: Guangdong Dacheng Ceramics Co., Ltd.	Australian Seastone Australian sandstonewas formed by the weathering of quartz, water erosion, a...
	Porcelain Tiles	Продавец: Guangdong Dacheng Ceramics Co., Ltd.	Porcelain Tiles China Porcelain Tiles Factory — Wholesale & Customized Porcelain Tiles...
	MOISTURE-RESISTANCE MDF	Продавец: Linyi minchan imp&exp co.,ltd	MOISTURE-RESISTANCE MDF Moisture Resistant MDF (HMR MDF)by MinChanis specially engineered for us...