300 ton bridge erecting cranes beam launcher machine for subway bridge construction

Product Description

300 ton bridge erecting cranes beam launcher machine

300 ton bridge erecting cranes beam launcher machineis used in the erection of precast beam bridges for span by span method of construction for precast beam girders like T beam, U beam, etc. This self-beam launcher is suitable for bridge construction over river, valley or highway and so on.

300 ton bridge erecting cranes beam launcher machineis suitable for the construction of bridge for roads, railways and other bridge erection construction site. Its main function is to lift the prefabricated beams, then transported onto the prefabricated pier. It has big difference from the general cranes. It requests high security.

Packing
1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying.
2. Main beams, end beams and electric hoist are packed by plastic woven cloth. It can reduce abrasion when transport.

Delivery
1. If the size of300 ton bridge erecting cranes beam launcher machineare suitable for container ship, usually by container.
2. If the size is too big, usually by bulk ship or by container after truncation; Transport ways are based on reducing cost for you and keep the crane performance.

Delivery time
Within 30 to 40 working days after the receipt of deposit.

Transportation
Generally 35 days to 50 days to destination port.

FAQ

1. What’stheinformationshouldIprovidewheninquiry about the300 ton bridge erecting cranes beam launcher machine?
1.1 We need the Bridge Drawing, the Maximum longitudinal slope and the Maximum Transverse slope.
1.2 The Girder/beam drawing.

2.What are inspection standard for load test of 300 ton bridge erecting cranes beam launcher machine?
2.1 Dynamic load test
1.1 times rated load, main girder does not down deflection, all mechanisms work well, performance parameters meet the design demand, all limit switches and safety protection interlock devices are reliable, all spare parts does not have cracking and flexible connection, all motors and contactors are not overheat.

2.2 Static load test
1.25 times rated load, all mechanisms work well, the crane stops 20-30 min as trial load is lifted 10 cm high, then measure main girder down deflection(theodolite, ruler). Put down trial load to measure main girder upper camber, repeat 3 times, steel structure does not have permanent deformation;

3. How to make highway bridge concrete girders?
a. Full span prefabrication.
b. Segment girder prefabrication.
c. Full span cast-in-place girder.
d. Segment cast-in-situ.

4. How about maintenance of 300 ton bridge erecting cranes beam launcher machine?
4.1 Lubricating: Working performance and service life of all mechanisms of crane depend on lubricating to a big extent.

4.2 Steel wire rope: Fracture of wire has to be specially noticed. A new steel wire rope has to be changed immediately with the condition of broken wire, broken strands and wear loss to scrapping standard.
4.3 Spreader: The spreader has to be checked regularly.
4.4 Pulley block: Mainly check rope race wearing condition, check whether wheel flange is cracked and whether pulley could get stuck in the axle or not.
4.5 Wheels: Regularly check wheel flange and tread, a new wheel has to be immediately replaced as crack part or wearing in wheel flange reaches 10% of wheel thickness; Re-polishing has to be done as diameters between two driving wheels on tread differs more than D/600, or there are severe scar on the tread.
4.6 Brake: Check one time per shift; The brake should be in accurate movement, and pins do not allow to be stuck. Brake shoes shall fit brake wheels correctly; the brake shoes interval shall be equal to open them.

5. How many Personnel and equipment to assemble 300 ton bridge erecting cranes beam launcher machinein the worksite we need?
Personnel: 8 to 10 workers equipment
Truck crane > 50 t : 2 sets
Φ19.5 steel wire rope 8 m: 4 ropes
Sleepers: several
Electric welding machine: 1 set
Oxygen, acetylene: 1 set
Hammer(12 pound and 8 pound): 1 set for each
Wrench and pincher: several
Gradienter: 1 set

Other supplier products

	出厂价格专业定制重型起重双钩起重机	产品描述 出厂价专业定制的重型吊车双钩，通常为吊车配备安全锁扣，防止吊索吊索、吊链或吊索脱离负载。专业定制的起重机重吊钩，可按外观分为单钩和双钩，按生产方法分为锻造钩和铸造钩。吊钩是连接起重机和起重机重量的纽带，起着至关重要的作用，必须重视对它的维护。出厂价格专业定制的重型吊钩双吊钩，用于起重...
	丰富的出口经验，可移动/固定门式旋臂起重机船厂起重机	产品描述 产品应用 丰富的港口装卸、船厂物料装卸、造船修船厂、冶金行业等移动式/固定式门式旋臂起重机出口经验。船厂移动式/固定式门式旋臂起重机由机架、升降机构、变幅机构、旋臂机构、行走机构、吊具装置(抓斗、集装箱吊具、吊钩)、电气设备等安全辅助装置组成。所采用的刚性齿条和螺杆变幅机构保证了恒定...
	120ton double truss beam launcher crane for railway construction	Product Description The unique120ton double truss beam launcher crane for railway constructionis designed for highway and railway. Accordi...
	混合动力100t - 300t双梁橡胶轮胎式龙门起重机起吊艇	混合动力100t - 300t双梁橡胶轮胎式龙门起重机起吊艇 混合100 t 300 t双光束轮胎龙门起重机吊船应用外部仓库或铁路侧共同提升和卸货工作,混合100 t 300 t双光束轮胎龙门起重机吊船桥组成,支撑腿,大车运行机制,电车,电气设备,起重绞车,框架采用框或桁架焊接类型机制,大车运...
	欧洲电动单梁桥式起重机起重机端梁端车	产品描述 欧洲电动单梁高架桥式起重机起重机端梁端车采用矩形管制造模块，缓冲电机驱动，配合锻造车轮，采用数控车床镗铣各种订制机床，一次性完成开孔、镗孔、铣钻。你只需要连接和调整起重机梁和端架。低成本，使您的起重机制造、安装和维修非常容易。 优势 1.轻量级的健壮的建设。 2.提升最大负载的低努力...

供应产品

Same products

	1.22*1.22m Panel HDG Water Tank	卖方: shijiazhuang Kaixuan Victor Technology Co.,Ltd	The1.22*1.22m Panel HDG Water Tank, also known as a Hot Dip Galvanized Water Tank or Pressed Stee...
	High Strength SMC Molded Water Tank	卖方: shijiazhuang Kaixuan Victor Technology Co.,Ltd	The High Strength SMC Molded Water Tank, also widely known as a GRP Water Tank, FRP water tank, o...
	Glass Wool Board With Facing	卖方: HEBEI LIANGPENG NEW MATERIAL CO.,LTD	Glass Wool Board With Facing What is Glass Wool Board With Facing? Glass Wool BoardWith Facing ...
	Brown Formaldehyde-Free Glass Wool Blanket	卖方: HEBEI LIANGPENG NEW MATERIAL CO.,LTD	Brown Formaldehyde-Free Glass Wool Blanket Brown formaldehyde-free glass wool blanketis eco-frie...
	Glass Wool Blanket With Polypropylene Foil	卖方: HEBEI LIANGPENG NEW MATERIAL CO.,LTD	Glass Wool Blanket With Polypropylene Foil What is Glass Wool Blanket With Polypropylene Facin...