Floor type Freeze Dryer precautions before the experiment

• 

precautions before the experiment:
1. First make sure that the samples that need to be lyophilized have been pre-frozen. The sample to be dried can be placed in a low-temperature refrigerator or liquid nitrogen to freeze the product completely. The longer the time, the better the freeze-drying effect. The reason for pre-freezing is that the sample must be lyophilized in the solid state (freezing state).
2. Install the condensation chamber on the main unit, with a section of the seal ring on top, then add the base plate to the condensation chamber, paying attention to the protruding end facing up, then adding the adjustment plate to the top, and then installing the ring current. For the socket, it should be noted that the grooved portion on the side of the adjustment disc should correspond to the groove on the annular current socket (use the magnet to move the adjustment disc). If the metal block used with the magnet can not be taken down, it can be attached to the side of the fuselage and then removed.
3. Next, put the brackets, material trays, and then the drying bins in the top.
4. Then connect the floor type Freeze Dryer to the vacuum pump with a vacuum tube. The joints are made of international standard clamps. There is usually a sealing rubber ring in the clamp. Before connecting, apply a proper amount of vacuum grease on the rubber ring, which can protect the rubber ring and then clamp it with a clamp. Before each start-up, first check whether the pump oil in the vacuum pump is sufficient. ****** Use the ******. Look at the instructions for the vacuum pump. Different vacuum pumps may have different requirements. But not oil-free operation, the oil level should be at 2/3.
5. Check all the external bottle valves to confirm that they are in the closed state (big head up), check whether the exhaust valve is closed, close the vacuum drain valve, unscrew the drain valve, and let the residual water flow out. Tighten the valve after draining.
6. Check if the contact part of the freeze-drying chamber and the cold trap is intact, clean and re-adjust if necessary. Also pay attention to regular cleaning of the cold trap chamber and freeze-drying chamber in normal situations.
7. Close all valves (valves connected directly to the lyophilized bottle, the white knob is closed upwards). Close the valve that the cold trap and vacuum pump want to connect (behind the instrument, connect to the vacuum tube).
8, start experimenting

If you have the needs of freeze dryers, freeze dryers, etc., you need to know the quotation, Please go to to find the or : Contact us, we will contact you in the first time.

Другие товары поставщика

	LG-50 production food freeze dryer	March means that spring has come, the earth has melted the snow and ice, and the warm sun has gradually climbed into the sky with the rain and th...
	LGJ-30F Top Press Type Experimental Freeze Dryer	Technical parameters 　　freeze drying area：0.3㎡ 　　tray dimensions：295×335mm 　　tray numbers：3pcs 　　shelf dimensions：300×340mm 　　sh...
	freeze drying machine for home	In order to adapt to the use in industrial environments, programmable control plays an important role in the field of: 　　1. High reliability and ...
	Beef freeze dryer process	Beef freeze dryer process is a special form of food vacuum drying. There are many other methods for freeze-drying, such as vacuum freeze-drying, s...
	LGJ-50F Top Press Type Experimental Freeze Dryer	This is not only suitable for the freeze drying of bulk (liquid, pasty, solid) conventional materials, but also suitable for the drying of the ...

Похожие товары

	Контроль и установка контейнера	Продавец: 821678	Guangdong Inspection and Testing Co., Ltd. является одним из ведущих сторонних поставщиков услуг ...
	Контроль и установка контейнера	Продавец: 821678	Guangdong Inspection and Testing Co., Ltd. является одним из ведущих сторонних поставщиков услуг ...
	CLONED CARDS+ FRESH DUMPS+PIN,	Продавец: cardersdrives	Sell Fresh Dumps CCV+FULLZ GIFTCARDS Credit Cards CLONECARDS ALL COUNTRY LIVE 100%Dumps CVV Fresh...
	AFEN европейский торговый автомат с лапшой для чашки горячего и холодного кофе с монетой	Продавец: Hunan Aifeng Vending Machine Co., Ltd.	Model AF-60GC4 Name Cup noodle vending machine Capacity ...
	AFEN 24-часовой автоматический аптечный магазин самообслуживания, медицинский шкафчик, торговый автомат	Продавец: Hunan Aifeng Vending Machine Co., Ltd.	Model AF-ZK(22SP)+AF-BLH-19S Dimension H:1940mmW:397mmD:320mm Power AC100V-240...