Floor type Freeze Dryer precautions before the experiment

precautions before the experiment:
1. First make sure that the samples that need to be lyophilized have been pre-frozen. The sample to be dried can be placed in a low-temperature refrigerator or liquid nitrogen to freeze the product completely. The longer the time, the better the freeze-drying effect. The reason for pre-freezing is that the sample must be lyophilized in the solid state (freezing state).
2. Install the condensation chamber on the main unit, with a section of the seal ring on top, then add the base plate to the condensation chamber, paying attention to the protruding end facing up, then adding the adjustment plate to the top, and then installing the ring current. For the socket, it should be noted that the grooved portion on the side of the adjustment disc should correspond to the groove on the annular current socket (use the magnet to move the adjustment disc). If the metal block used with the magnet can not be taken down, it can be attached to the side of the fuselage and then removed.
3. Next, put the brackets, material trays, and then the drying bins in the top.
4. Then connect the floor type Freeze Dryer to the vacuum pump with a vacuum tube. The joints are made of international standard clamps. There is usually a sealing rubber ring in the clamp. Before connecting, apply a proper amount of vacuum grease on the rubber ring, which can protect the rubber ring and then clamp it with a clamp. Before each start-up, first check whether the pump oil in the vacuum pump is sufficient. ****** Use the ******. Look at the instructions for the vacuum pump. Different vacuum pumps may have different requirements. But not oil-free operation, the oil level should be at 2/3.
5. Check all the external bottle valves to confirm that they are in the closed state (big head up), check whether the exhaust valve is closed, close the vacuum drain valve, unscrew the drain valve, and let the residual water flow out. Tighten the valve after draining.
6. Check if the contact part of the freeze-drying chamber and the cold trap is intact, clean and re-adjust if necessary. Also pay attention to regular cleaning of the cold trap chamber and freeze-drying chamber in normal situations.
7. Close all valves (valves connected directly to the lyophilized bottle, the white knob is closed upwards). Close the valve that the cold trap and vacuum pump want to connect (behind the instrument, connect to the vacuum tube).
8, start experimenting

If you have the needs of freeze dryers, freeze dryers, etc., you need to know the quotation, Please go to to find the or : Contact us, we will contact you in the first time.

Other supplier products

	LGJ-18S Multi Manifold Standard Type Experimental Freeze Dryer	Technical parameters： 　　freeze drying area：0.18㎡/0.27㎡ 　　tray dia.：Ф240mm 　　tray numbers：4pcs/6pcs 　　tray spacing：70mm 　　flask capacity &...
	LGJ-12S Series Vacuum Freeze Dryer	When we say ?, we truly mean home. It provides the convenience, simplicity, and electrical power requirements of other major kitchen appliances...
	systems of the laboratory freeze dryer	Come take a look at the different "composition systems" of the laboratory freeze dryer. ·The refrigeration system of the The in...
	LGJ-12S Multi Manifold Top Press Type Experimental Freeze Dryer	Technical parameters： 　　freeze drying area：0.08㎡ 　　tray dia.：Ф180mm 　　tray numbers：3pcs 　　tray spacing：70mm 　　flask capacity & q'ty：1...
	LGJ-12 multi manifold top press type	Technical parameters： freeze dryingarea：0.08㎡ traydia.：Ф180mm tray numbers：3pcs trayspacing：70mm cold trap temperature：≤-56℃，optional≤-8...

供应产品

Same products

	货柜监装	卖方: 821678	广东检验检测有限公司是中国领先的第三方质量控制服务提供商之一，一直为全球客户提供产品检验、工厂/供应商评估、项目质量管理、产品测试以及质量工程咨询。监装是产品装入集装箱时的装车过程控制。
	货柜监装	卖方: 821678	广东检验检测有限公司是中国领先的第三方质量控制服务提供商之一，一直为全球客户提供产品检验、工厂/供应商评估、项目质量管理、产品测试以及质量工程咨询。监装是产品装入集装箱时的装车过程控制。
	CLONED CARDS+ FRESH DUMPS+PIN,	卖方: cardersdrives	Sell Fresh Dumps CCV+FULLZ GIFTCARDS Credit Cards CLONECARDS ALL COUNTRY LIVE 100%Dumps CVV Fresh...
	AFEN欧式速溶热冷咖啡杯面自动售卖机投币式	卖方: 湖南艾丰自动售货机有限公司	Model AF-60GC4 Name Cup noodle vending machine Capacity ...
	AFEN 24 hour self service automatic pharmacy store medical locker vending machine	卖方: 湖南艾丰自动售货机有限公司	Model AF-ZK(22SP)+AF-BLH-19S Dimension H:1940mmW:397mmD:320mm Power AC100V-240...