SRX Type Ring Joint Gasket
Type SRX and SBX gaskets per API 17D for Subsea Wellhead and Tree Equipment are vented to prevent pressure lock when connections are made up underwater. They have identical measurements to RX and BX ring gaskets with the same number designation, and they will fit the same corresponding connectors. The "S" indicates these gaskets have cross-drilled holes, as fluid entrapment in the ring groove can interfere with proper make up underwater (subsea). With the vent hole, any water trapped between a ring groove bottom and the sealing area of the gasket can escape to the equipment I.D. bore. Material per spec is defined as a corrosion resistant alloy.
Другие товары поставщика
|
|
I. Definition:it is a kind of packing made of graphite PTFE wire which is made of PTFE fiber with graphite powder and certain thermostable lubrican... |
|
|
The IX Seal-rings are designed and used where the NORSOK CFC (Compact Flange Connections) are in use. The rings come in three different kinds of st... |
|
|
escriptionExpanded PTFE Gasket is 100% PTFE, resistant to all corrosive media. Soft, twistable and bendable at will.Excellent anti-wriggle variatio... |
|
|
Oil Resistance Non-asbestos Sheets Sealstars NY4150W is an Oil Resistance non-asbestos gasket sheet on the basis of acrylic fibers, cellulose fibe... |
|
|
Oil Resistance Non-asbestos Sheets Sealstars NY4200 is an Oil resistance non-asbestos gasket sheet on the basis of aramid fiber, acrylic fibers, mi... |
Все товары поставщика
Похожие товары