BYTF605-Epoxy Primer
Auto Coatings
Product Name/Model：BYTF605-Epoxy Primer
Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal, goodadhesion power to steel, aluminium, galvanized steel and stainless steel, excellent chemicalcorrosion resistance and rust resistance.
|
Substrates |
Dried and sanded existing finishes, steel, aluminium, stainless steel, galvanized steel,glass fiber reinforced plastic. |
||
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations with degreaser,sanding with P800-P1000, wash with clean water then keep dry; again with degreaser. |
||
|
Mixing Ratio |
BYTF605 Epoxy Primer |
BYTH105 Epoxy Hardener |
BYTX-5 Epoxy Thinner |
|
4 |
1 |
1~2 |
|
|
＜30℃ |
BYTF605 Epoxy Primer |
BYTH105 Epoxy Hardener |
BYTX-5 Epoxy Thinner |
|
SprayViscosity |
16-19s to drop off, in 4# viscosity cup at 25°C, |
||
|
Pot-life |
At 20°C, 3 hours with hardener. |
||
|
Re-Treatment |
Sanded with P600orP800 sand paper, do following construction after drying |
||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2 |
||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 25-35um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature andpaint film. |
||
|
Drying Time |
|
||
|
Shelf Life |
2 years in original sealed can, cool and dry place at 25℃. |
||
|
Package |
1L×12or3.75L×4 |
||
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to becleaned after dry.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
F400-1K Primer Surfacer | Auto Coatings Product Name/Model：F400-1K Primer Surfacer Characteristic: Fast drying one-component 1K Primer Surfacer with strong filling power, e... |
 |
BYT Clear Coat Series | BYT Clear Coat Series Auto Coatings Product Name/Model：BYT Clear Coat Series Characteristic:1、 BYT518 Clear Coat ：Two- component 518 clear coat wi... |
 |
MSD Series Thinner | MSD Series Thinner Car Refinish Paint Product Name/Model:MSD Series Thinner Characteristic: High quality thinner, specially developed for primer, ... |
 |
F605-Epoxy Primer | 1、F605-Epoxy Primer Automotive Paints Supplier Product Name/Model:F605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle... |
|
|
BYTF605-Epoxy Primer | Auto Coatings Product Name/Model：BYTF605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal,... |
Похожие товары
 |
Heat Sealing Sterilization Pouch | Продавец: Hopeway AMD | Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ... |
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | Продавец: Trucont LLC | В компании Trucont LLC мы постоянно предлагаем лом каталитических преобразователей для немедленно... |
 |
Epimedium Extract | Продавец: Fruit Powder,Vegetable Powder | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
