BYTF605-Epoxy Primer
Auto Coatings
Product Name/Model：BYTF605-Epoxy Primer
Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal, goodadhesion power to steel, aluminium, galvanized steel and stainless steel, excellent chemicalcorrosion resistance and rust resistance.
|
Substrates |
Dried and sanded existing finishes, steel, aluminium, stainless steel, galvanized steel,glass fiber reinforced plastic. |
||
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations with degreaser,sanding with P800-P1000, wash with clean water then keep dry; again with degreaser. |
||
|
Mixing Ratio |
BYTF605 Epoxy Primer |
BYTH105 Epoxy Hardener |
BYTX-5 Epoxy Thinner |
|
4 |
1 |
1~2 |
|
|
＜30℃ |
BYTF605 Epoxy Primer |
BYTH105 Epoxy Hardener |
BYTX-5 Epoxy Thinner |
|
SprayViscosity |
16-19s to drop off, in 4# viscosity cup at 25°C, |
||
|
Pot-life |
At 20°C, 3 hours with hardener. |
||
|
Re-Treatment |
Sanded with P600orP800 sand paper, do following construction after drying |
||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2 |
||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 25-35um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature andpaint film. |
||
|
Drying Time |
|
||
|
Shelf Life |
2 years in original sealed can, cool and dry place at 25℃. |
||
|
Package |
1L×12or3.75L×4 |
||
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to becleaned after dry.
在线联系供应商
Other supplier products
 |
BC1K Solid Colors (Basecoat Colors) | BC1K Solid Colors (Basecoat Colors) Automotive Paints Supplier Product Name/Model:BC1K Solid Colors(Basecoat Colors) Characteristic:BC1K Solid Col... |
 |
BYTF350 Thinner SRA | BYTF350 Thinner SRA Car Paint Thinner Factory Product Name/Model;BYTF350 Thinner SRA Characteristic: An additive helps to achieve an invisble ... |
|
|
BYTF605-Epoxy Primer | Auto Coatings Product Name/Model：BYTF605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal,... |
 |
F600-Plastic Primer | F600-Plastic Primer Automotive Paints Supplier Product Name/Model:F600-Plastic Primer Characteristic: Single-component transparent fast drying... |
 |
MF605-Epoxy Primer | MF605-Epoxy Primer Automotive Paint company Product Name/Model:MF605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | 卖方: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | 卖方: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | 卖方: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | 卖方: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | 卖方: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
