.

Cinnamoyl chloride

Molecular Formula:C9H7ClO

Molecular Weight:166.604 g/mol

Synonym:Cinnamoyl chloride;3-Phenyl-2-propenoyl chloride;3-Phenylpropenoyl chloride;

EINECS No.:203-065-5

FEMA No.:2007

Density:1.1617 g/cm3 (20 C)

Melting point:35-37 °C(lit.)

Boiling point:256-258 °C(lit.)

Purity:≥98%

Appearance: white or yellowish crystal

Storage temp:0-6°C

Partition Coefficient:3.19

Heat Of Vaporization:49.5 kJ/mol

Water-solubility:Soluble in petroleum ether, carbon tetrachloride and hot ethanol, insoluble in water. Slowly decompose in water.

Storage

Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Refrigerator (approx 4 C). Store protected from moisture.

Handling

Keep container tightly closed. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Discard contaminated shoes.

 

Application:

Used as an intermediate in organic synthesis for the determination of trace moisture.

This product can be used as an intermediate in organic synthesis. Cinnamamide can be prepared by amidation, and n-cinnamyl -nphenylhydroxylamine can be prepared by interaction with phenylhydroxylamine. Cinnamyl chloride can also be used to synthesize the anti-inflammatory and analgesic drug Sinnoxicam (cinnoxicam) and other fine chemicals. A reagent for the determination of trace water.

 

 

Production preparation:

Cinnamyl chloride is obtained by the reaction of sodium cinnamate with acetyl chloride. The acetyl chloride and benzene are mixed into solution, and the dried sodium cinnamate is added several times under stirring from time to time. After each addition, the carbon dioxide is released and the next time is added. Then reflux for 2 hours. After a little cooling, the resulting sodium chloride and trace unreacted sodium cinnamate are filtered out. The filtrate was distilled to remove benzene at atmospheric pressure and then distilled at 131C (1.47kPa) to obtain the product in 75-90 yield. Carbon tetrachloride can be recrystallized when purification is needed. Cinnamyl chloride was prepared by the reaction of cinnamic acid with dichloro sulfoxide.

 

Polyvinyl cinnamate adhesive (PVAC,) is a linear polymer compound with molecular weight of 15000 ~ 20 000, which is obtained by esterification of polyvinyl alcohol and cinnamyl chloride. The photosensitive adhesive was prepared by adding 5-nitroacenaphthene and organic solvent cyclohexanone, that is, the double bond of the molecule was opened and solidified under ultraviolet light irradiation. It has important applications in the manufacture of integrated circuits and micro components. A photoresist, polyvinyl cinnamate, synthesized from polyvinyl alcohol and cinnamyl chloride in a pyridine solvent. The prepared photoresist is called KPR.. The photochemical dimerization of the double bond of cinnamate was formed under the action of ultraviolet light, and it was turned into an insoluble substance. KPR was the first photoresist used in photolithography, and 5-nitroacenaphthene was usually added as Guang Min. Photoresist, also known as photoresist, can be used in photolithography, which is widely used in printing and electronic industry. Its working principle is that the light part is crosslinked to form the insoluble hardening film, which is processed into negative image (negative glue), or the original insoluble glue becomes soluble after illumination, and is processed as a positive image (positive glue).



Отправить запрос, связаться с поставщиком

Кому: 726571
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Beta-Bromostyrene, mixture of cis
Beta-Bromostyrene, mixture of cis beta-bromostyrene(cis+trans);Bromostyrenecistrans;Bromostyrol; Bromostyrene;2-Bromovinylbenzene;b-bromostyrene;beta-Bromostyrene,mixture of&nb...
2-Methylcinnamic acid
2-Methylcinnamic acid Molecular Weight: 162.19 Melting point: 174-176 °C(lit.) Boiling point: 293.5 °C at 760 mmHg Density:1.147 g/...
Ethyl cinnamate
Ethyl cinnamate Product name:  Ethyl cinnamate Synonyms:  2-propenoic acid; 3-phenyl-2-propenoicaciethylester CAS No:  103-36-6 Molecular Formu...
Hydrogenated cinnamic acid
Hydrogenated cinnamic acid Molecular weight: 150.17 EINECS number: 207-924-5 Purity: ≥98% Packing specification: 25 kg / packaging   Use limit: FEMA (mg / kg): bevera...
Cinnamamide
Cinnamamide Other Names:Cinnamamide,predominantly trans;(Z)-3-phenylprop-2-enamide CAS No:621-79-4  EINECS No:210-707-8 Formula:C9H9NO Molar volume:147.17...
Все товары поставщика

Похожие товары

Isobutyl cinnamate
Isobutyl cinnamate Продавец: anabolic steroid raw powders Isobutyl cinnamate Organic Synthetic Intermediate   Description Isopropyl cinnamate has a ba...
2-Bromocinnamic acid
2-Bromocinnamic acid Продавец: anabolic steroid raw powders 2-Bromocinnamic acid Ethyl Cinnamate 2-Bromocinnamic-acid (C9H7BrO2) is a white crystal with a me...
2-Methoxycinnamic Acid
2-Methoxycinnamic Acid Продавец: anabolic steroid raw powders 2-Methoxycinnamic Acid High-Quality Cinnamic Acid (E)-2-methoxycinnamic acid is a member of the c...
3-phenylpropionic acid
3-phenylpropionic acid Продавец: anabolic steroid raw powders 3-phenylpropionic acid Trans-Cinnamic Acid 3-Phenylpropionic acid is a carboxylic acid that belon...
3-Chlorocinnamic Acid
3-Chlorocinnamic Acid Продавец: anabolic steroid raw powders 3-Chlorocinnamic Acid Hydrocinnamic Acid   Handling and Storage Store in a tightly-closed co...