PODE Plant
is a kind of oligoether compound which is produced by acetalization reaction. When both ends of poden are blocked by methoxy, it is called polymethoxydimethyl ether (dmm3-8, molecular formula CH3O (CH2O) nch3). Compared with DME and dmm1, dmm3-8 has higher viscosity and boiling point, so mixing with diesel does not need to change the existing engine Oil supply system.
When the polycondensation molecular unit is controlled at n = 3-6, dmm3-8 has a good miscibility with diesel oil, with an average cetane number of over 76 and a boiling point of 156-268 ℃, which is just in the range of diesel oil. It overcomes the shortage of DME and dmm1 as fuel components, fully meets the requirements of clean diesel oil blending and components, and is considered to be a promising environmental protection diesel oil component.
In addition to being an excellent oil additive, DMMNcan also be used as an excellent medium boiling point solvent with the following advantages: 1. Solubility. It has a strong dissolving power and can be completely miscible with hydrocarbons and alcohol, ether, acetone, etc. It is a good substitute for aromatic solvent (toluene, xylene, trimethylbenzene), DMF (dimethylformamide), methanol, glycol butyl ether and halogenated hydrocarbon.2. Amphiphilic solvent. At 16 ℃, 32.3% (WT) of dmmn was dissolved in water and 4.3% (WT) of water was dissolved in product. At the same time, it has good solubility in alkane, arene, ether, ketone aldehyde ester and halogenated hydrocarbon and can be used as compatibilizer. 3. Toxicity: the toxicity of organic solvents is the lowest, with slight toxicity, sulfur-free and aromatics free. Biodegradable. 4. Low cost.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Proprietary Technology and Plants China | Dimethyl Carbonate (DMC) Refining Technology Proprietary Technology and Plants TechnologyIntrodction: Dimethyl carbonate (DMC) is an important o... |
 |
Formic acid production technology | There are totally four production processes forformic acid production, incl. Sodium Formate Process, Butane (light oil) Liquid Phase Oxidation Proc... |
 |
Column Internals manufacturer | Ethyl Acetate Plant and Process Technology Proprietary Technology and Plants Technology Introduction: There are 4 main prevailing processes for ... |
 |
MEG Production Plant | MEG Production Plant Product Description There are two main routes for Ethylene Glycol (Monoethyle Glycol/MEG) production: one is the Olefin/EO(E... |
 |
Phenol Alkylation Plant | Phenol Alkylation Plant Product Description Alkyl phenolis produced by the alkylation of phenol by reacting with olefin, aliphatic alcohol, or ch... |
Похожие товары
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | Продавец: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | Продавец: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | Продавец: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | Продавец: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | Продавец: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
