PODE Plant
is a kind of oligoether compound which is produced by acetalization reaction. When both ends of poden are blocked by methoxy, it is called polymethoxydimethyl ether (dmm3-8, molecular formula CH3O (CH2O) nch3). Compared with DME and dmm1, dmm3-8 has higher viscosity and boiling point, so mixing with diesel does not need to change the existing engine Oil supply system.
When the polycondensation molecular unit is controlled at n = 3-6, dmm3-8 has a good miscibility with diesel oil, with an average cetane number of over 76 and a boiling point of 156-268 ℃, which is just in the range of diesel oil. It overcomes the shortage of DME and dmm1 as fuel components, fully meets the requirements of clean diesel oil blending and components, and is considered to be a promising environmental protection diesel oil component.
In addition to being an excellent oil additive, DMMNcan also be used as an excellent medium boiling point solvent with the following advantages: 1. Solubility. It has a strong dissolving power and can be completely miscible with hydrocarbons and alcohol, ether, acetone, etc. It is a good substitute for aromatic solvent (toluene, xylene, trimethylbenzene), DMF (dimethylformamide), methanol, glycol butyl ether and halogenated hydrocarbon.2. Amphiphilic solvent. At 16 ℃, 32.3% (WT) of dmmn was dissolved in water and 4.3% (WT) of water was dissolved in product. At the same time, it has good solubility in alkane, arene, ether, ketone aldehyde ester and halogenated hydrocarbon and can be used as compatibilizer. 3. Toxicity: the toxicity of organic solvents is the lowest, with slight toxicity, sulfur-free and aromatics free. Biodegradable. 4. Low cost.
Send product request
Other supplier products
 |
Urea Formaldehyde (UF) Glue Plant | Urea Formaldehyde (UF) Glue Plant Agent Technology and Plants Technology Introduction The Urea Formaldehyde (UF) technology provided by SL... |
 |
Hydrogen Peroxide Manufacturing Plant | There are several methods for, among them theAO(auto-oxidation) processis the most prevailing one. In this process, 2-alkyl anthraquinone is mixed... |
 |
Acetic Acid Plant | Acetic Acid Plant Proprietary Technology and Plants SL TEC has 15 years experience in acetic acid industry from technology R&D, plant design, e... |
 |
Proprietary Technology and Plants | Sec-Butyl Acetate Plant Proprietary Technology and Plants Technology Introduction: There are two prevailing processes for sec-butyl acetate (SBA... |
 |
Air Separation Packing China | Air Separation Packing Air Separation Unit (ASU) Packing Air Separation Packing Air Separation Packing Technology Distillation Technolo... |
Same products
 |
BQH 72-102 grease 1KG for Pick and Place Machine | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | LUBE FS-2-4 400G LUBE FS-2-2 200G LUBE FS-1-7 700G LUBE MY-2-7 700G LUBE NS-1-7 700G LUBE NS... |
 |
ADC Monomer | Seller: Nanjing Chemical Material Corp. | Features of ADC Monomer Product Name: Allyl Diglycol Carbonate(ADC Monomer) Chemical Formula: C... |
 |
Acetyl Chloride | Seller: Nanjing Chemical Material Corp. | Features of Acetyl Chloride Product Name: Acetyl chloride Chemical Formula: C2H3ClO Acetyl chl... |
 |
Methacryloxypropyltrimethoxysilane | Seller: Nanjing Chemical Material Corp. | Features of 3-Methacryloxypropyltrimethoxysilane Product Name: 3-Methacryloxypropyltrimethoxysil... |
 |
Aminopropyltriethoxysilane | Seller: Nanjing Chemical Material Corp. | Features of (3-triethoxysilyl)propylamine Product Name: 3 aminopropyltriethoxysilane solubility ... |
