Extraction of Aluminium in Fly Ash
There are three main types of extraction of Aluminium:
(1) Sulfuric acid refining: 1. The fly ash is ground and calcined and activated, and then leached by sulfuric acid and concentrated to obtain aluminum sulfate crystals; 2. after calcination, an alkaline solution is added; 3. using iron removal technology, Aluminum hydroxide is obtained; 4. It is then calcined and aluminium is obtained. Because sulfuric acid has strong acidity and volatility, it not only poses a threat to the safety of operators, but also pollutes the environment. Therefore, pay attention to safety during the operation.
(2) Refining ammonium aluminum sulfate: 1. Grinding fly ash and mixing with ammonium sulfate, then calcining at high temperature; 2. Leaching with sulfuric acid and filtering; 3. Using ammonia water to make the pH of the filtrate to about 2.0, then Aluminium ammonium sulfate crystals were precipitated; 4. Sulfuric acid was added at 60 ° C and cooled to precipitate all crystals. And repeated operations 3 times to obtain ammonium aluminum sulfate; 5. The product is thermally decomposed to obtain aluminium. This method can obtain aluminium with higher purity.
(3)Fluorine ammonium refining: 1. Mix fly ash with ammonium fluoride (acidic) solution and heat to obtain crude alumina; 2. Add alkaline solution, then pass carbonation and pyrolysis to obtain purer aluminium. This method has a large extraction rate, but the cost is high.
With a solid thirteen-year history of growth and expansion, SINOFLOChas become a leading manufacturer and supplier of water-soluble superabsorbent polymers in China. Founded in 2003 and expanded production capacity since 2009, now we have 2 facilities with the flocculants and coagulants capacity of 90,000 MT annually.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Red Mud Settling Flocculants | Red Mud Settling Flocculants SINOFLOC red mud settling flocculantsis used for settling aluminum red mud slurries in alumina plants, which provide ... | |
Enhanced Oil Recovery (EOR) | SINOFLOC manufactures a complete range of anionic polyacrylamide for . Our chemicals for Polymer Flooding, long chain polyacrylamide molecules mixe... | |
Drilling Fluid Additives - Drilling Mud Viscosifier | Drilling Fluid Additives - Drilling Mud Viscosifier In the drilling operation, the anionic high polymer is often used as drilling fluid additive... | |
Chemical Conditioning of Sludge Dewatering | Chemical Conditioning of Sludge Dewatering At present, there are many sludge treatment technologies in China, including sludge dewatering, concentr... | |
Anionic Flocculants | SINOFLOC anionic polyacrylamide powderare co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negativ... |
Похожие товары
LUBE SH-ONE-4S 400G for Fanuc Machines | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | TheLUBE SH-ONE-4Sis a special ureagreasedesigned for appropriatelubricationmanagement of machine ... | |
Mobil Grease 28 Synthetic Aviation Grease | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Mobilgrease 28resists water washing, provides superior load-carrying ability, reduces frictional ... | |
Kluber Isoflex Topas NCA 5051 50ml Original Lubricants | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | ISOFLEX TOPAS NCA 5051has a wide temperature range, is resistant to ageing and provides special c... | |
CHRISTO-LUBE MCG 111 2-OZ Valve Seal Grease | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Non-reactive lubricant safe for aviation oxygen equipment. Great for use on O-Rings | |
Permatex 81160 85G High Temperature Resistant Resin | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | This high temperature gasket maker is resistant to high thermal cycling and is sensor-safe, non-c... |