CBS (CZ) CAS 95-33-0
95-33-0 –Names and Identifiers
| Name | N-cyclohexylbenzothiazole-2-sulphenamide |
| Synonyms | CZ CBS curax conaca delacs conach conacs pennaccbs royalcbts ekagomcbs noccelercz rhodifax16 accicurehbs sancelercm-po Acelerator CZ Accelerator CZ SULPHENAMIDETS Rubber Accelerator CZ Rubber Accelerator CBS N-CYCLOHEXYLBENZOTHIAZOLESULFENAMIDE benzothiazyl-2-cyclohexylsulfenamide 2-(cyclohexylaminothio)benzothiazole cyclohexyl-2-benzothiazolesulfenamide N-Cyclohexylbenzothiazol-2-sulfenamid n-cyclohexyl-2-benzothiazolesulfenamid n-cyclohexyl-2-benzothiazylsulfenamide N-Cyclohexyl-2-benzthiazolsulphenamide CYCLOHEXYL-2-BENZOTHIAZOLESULPHENAMIDE N-Cyclohexyl-2-benzothiazolesulfenamide N-CYCLOHEXYL-2-BENZOTHIAZYLSULPHENAMIDE n-cyclohexyl-2-benzenethiazolesulfenamid N-cyclohexyl-2-benzothiazole Sulfenamide N-Cyclohexyl-2-benzothiazolylsulfenamide N-cyclohexylbenzothiazole-2-sulphenamide N-Cyclohexylbenzo[d]thiazole-2-sulfonaMide CBS, N-Cyclohexyl-2-benzothiazolesulfenamide N-(1,3-benzothiazol-2-ylsulfanyl)cyclohexanamine |
| CAS | 95-33-0 |
| EINECS | 202-411-2 |
| InChI | InChI=1/C13H16N2S2/c/h4-5,8-10,15H,1-3,6-7H2 |
| InChIKey | DEQZTKGFXNUBJL-UHFFFAOYSA-N |
95-33-0 –Physico-chemical Properties
| Molecular Formula | C13H16N2S2 |
| Molar Mass | 264.41 |
| Density | 1.31~1.34g/cm3 |
| Melting Point | 93-100°C |
| Boling Point | 410.4±28.0 °C(Predicted) |
| Flash Point | 202°C |
| Water Solubility | Insoluble |
| Solubility | Chloroform (Slightly), DMSO (Slightly), Ethyl Acetatae (Slightly) |
| Vapor Presure | 6.04E-07mmHg at 25°C |
| Appearance | Form Solid, color Pale Yellow to Light Beige |
| Color | Pale Yellow to Light Beige |
| pKa | 0.59±0.10(Predicted) |
| Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
| Refractive Index | 1.5700 (estimate) |
| Physical and Chemical Properties | Melting point 93-100°C water-soluble Insoluble |
| Use | Is an excellent after-effect accelerator, suitable for natural rubber and synthetic rubber and tire and other rubber products |
95-33-0 –Risk and Safety
| Risk Codes | R36/37/38 – Irritating to eyes, respiratory system and skin. R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R43 – May cause sensitization by skin contact |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 – Wear suitable protective clothing, gloves and eye/face protection. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S60 – This material and its container must be disposed of as hazardous waste. S37 – Wear suitable gloves. S24 – Avoid contact with skin. |
| UN IDs | 3077 |
| RTECS | DL6250000 |
| Hazard Class | 9 |
| Packing Group | III |
| Toxicity | LD50 oral in rat: 5300mg/kg |
95-33-0 –Upstream Downstream Industry
| Raw Materials | Sodium hydroxide Chlorine Aniline Sodium hypochlorite 2-Mercaptobenzothiazole Cyclohexylamine N-chlorocyclohexylamine 2-Benzothiazolesulfenicacid,anhydridewithHSCN(6CI) Cyclohexanone, S-2-benzothiazolylthiooxime 2-Benzothiazolesulfenamide(6CI,7CI,8CI,9CI) Sodium mercaptobenzothiazole 2-Butoxyethanol 2,2′-Dithiobis(benzothiazole) Cyclohexanone |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Polyester based powder coating White | Product Description MT-MA220G is a polyester based powder coating, formulated without TGIC and is designed for exterior exposure offering excellen... |
 |
polyurethane adhesive | Introduction High performance solvent-free polyurethane adhesive with excellent peel strength, resistance to cold and hot impacts, and fast positi... |
 |
CAS 1823-59-2 | Introduction 4.4 ‘-oxybis-phthalic anhydride is a white to white powder organic substance that can be used to make polyimide resins. Applic... |
 |
Composite materials – epoxy resin adhesive | MT 4003/5112/3042/4512LV series and EP242 series: The characteristics of good toughness, wide applicable temperature, and moderate activation time... |
 |
1,2-Bis(3-methylphenoxy)ethane CAS 54914-85-1 | CAS:54914-85-1, 54914-85-1 – Names and Identifiers Name 1,2-Bis-(3-methyl-phenoxy)ethane Synonyms F-203(EGTE)1,2-Bis-(m-tolylo... |
Похожие товары
 |
Procaine | Продавец: 862043 | CAS:59-46-1 |
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | Продавец: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
