Camera adhesive
Introduction
With the increasing demand for consumer electronics and the development of autonomous driving in automobiles, the demand for camera modules in the consumer electronics and automotive markets has significantly increased, and the demand for adhesive parameters in this application is also constantly increasing. The camera module has extremely high requirements for the precipitation, strength, aging resistance, as well as the morphological changes, thermal expansion changes, and curing efficiency of the adhesive after curing. For example, the lens part has good temperature resistance, light resistance, and aging resistance when in contact with the outside for a long time, and the precipitation rate is strictly controlled to avoid contaminating the lens and affecting imaging.
Camera module is one of the key industries that Hansi Electronics focuses on and invests in. In response to this market, Hansi Electronics continues to invest in research and development, as well as technological resources for innovation. We can provide comprehensive camera module bonding solutions, including lens holder alignment, filter bonding, lens bonding, barrel bonding, lens holder bonding, FPC reinforcement, VCM motor bonding, including UV glue, UV thermosetting, low-temperature epoxy and other technical categories.
| Property | Camera Adhesive |
|---|---|
| Composition | Epoxy or acrylic-based formulations with low shrinkage and high thermal stability. |
| Curing Method | UV/LED curing or thermal curing (heat-activated). |
| Key Applications | Bonding camera lenses, image sensors, and modules; securing components in high-precision assemblies. |
| Advantages | High bond strength, resistance to thermal cycling/vibration, low outgassing (NASA ASTM E595 compliant). |
| Limitations | Brittle if not properly formulated; requires precise application for optical alignment. |
| Industry Use | Critical in smart, automotive, and aerospace camera modules for reliability. |
Notes:
UV-Curable Adhesives: Enable rapid processing in manufacturing, often used for active alignment applications.
Thermal Stability: Ensures consistent performance in temperature-sensitive camera environments.
Low Outgassing: Important for vacuum-sealed or sensitive optical components to prevent contamination.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
MS modified silane sealant | Modified silane sealant, environmentally friendly, has a wide range of adhesive properties, no need for primer, UV protection, no solvents or silic... |
 |
Isophorone (IPHO) CAS 78-59-1 | Introduction Chemical Name: IPHO, Isophorone, 3,5,5-Trimethyl-2-Cyclohexene-1-One, 1,1,3-Trimethyl-3-cyclohexene-5-one Molecular F... |
 |
4-acryloylmorpholine CAS 5117-12-4 | Introduction CAS NO. 5117-12-4Molecular formula: C7H11NOAppearance: Colorless or pale yellow transparent liquidContent: 98%minColor code: 30APHA m... |
 |
Diacetone Alcohol CAS 123-42-2 | Introduction Products name ： Diacetone Alcohol CAS NO. ： 123-42-2 Molecular Formula： C6H12O2 Structural formula： Us... |
 |
Automotive Interior – Water based Adhesive | The series of water-based adhesive products include two-component water-based polyurethane adhesive, which is widely used in the field of automotiv... |
Похожие товары
 |
4,4′-oxydiphthalic Anhydride(ODPA) CAS 1823-59-2 | Продавец: Standard International Group (HK) Limited | Introduction 4,4 ‘-oxybis-phthalic anhydride is a white to white powder organic substance ... |
 |
Composite Material – Acrylic Instant Drying Adhesive | Продавец: Standard International Group (HK) Limited | MT941/MT912/MT994 series: One component quick curing, solvent-free cyanoacrylate adhesive. The p... |
 |
2K-MMA two-component acrylic adhesive | Продавец: Standard International Group (HK) Limited | 2K-MMA two-component acrylic adhesive is a structural adhesive with fast curing speed, high bondi... |
 |
Adhesive for optical communication | Продавец: Standard International Group (HK) Limited | In the field of fiber optic assembly industry, our product line includes single/two-component epo... |
|
|
Camera adhesive | Продавец: Standard International Group (HK) Limited | Introduction With the increasing demand for consumer electronics and the development of auto... |
