High-Purity Xenon
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Details
Product Names
Ultra-High Purity Xenon
High-Purity Xenon
Xenon
Purity
Ultra-High Purity Xenon: ≥99.9995%
High-Purity Xenon: ≥99.999%
Impurity Content (ppm)
| Impurity | Ultra-High Purity | High-Purity |
|---|---|---|
| Nitrogen (N₂) | ≤1.5 | ≤2.5 |
| Oxygen (O₂) + Argon (Ar) | ≤0.5 | ≤1.5 |
| Hydrogen (H₂) | ≤0.5 | ≤0.5 |
| Carbon Monoxide (CO) | ≤0.1 | ≤0.2 |
| Carbon Dioxide (CO₂) | ≤0.1 | ≤0.3 |
| Hydrocarbons (CH₄) | ≤0.1 | ≤0.3 |
| Water (H₂O) | ≤1 | ≤2 |
| Krypton (Kr) | ≤1 | ≤2 |
| Dinitrogen Monoxide (N₂O) | ≤0.1 | ≤0.2 |
| Fluoride Content (CxFy) | ≤0.1 | ≤0.5 |
Packaging
Filled in 40L steel cylinders, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Recommended for industrial use; used for filling flash tubes and flash lamps, and as a deep anesthetic.
Physical and Chemical Properties
CAS Number: 7440-63-3.
Physical and Chemical Characteristics: Colorless and odorless inert gas. Insoluble in water. Melting point (℃): -112; Boiling point (℃): -107.1; Relative density (water=1): 3.52 (-109℃); Relative density (air=1): 4.56; Saturation vapor pressure (kPa): 724.54 (-64℃); Flash point (℃): No data; Combustion heat (kJ/mol): 241; Critical temperature (℃): 16.6; Critical pressure (MPa): 5.88; Upper and Lower Explosion Limits (v%): Not applicable; Ignition temperature (℃): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Non-flammable. Remove containers from the fire area if possible. Spray water to keep the containers cool until the fire is out. Evacuate people to the upwind side and isolate the contaminated area. Emergency personnel should wear self-contained positive pressure breathing apparatus and general work clothes. Cut off the leak source if possible. Ensure adequate ventilation to disperse the gas. Handle the leaking container properly, repair and inspect before reuse.
Health Hazards: The hazards to humans are similar to those of argon. Inhalation of a mixture of 70% xenon and oxygen can cause mild anesthesia, with loss of consciousness occurring after about 3 minutes.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Henan Shangqiu Jianye Headquarters Port powder coating | Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical and mechanical properties, especia... |
 |
Polyester based powder coating MT-OA010G White | Product Description MT-OA010G is a polyester based powder coating, formulated without TGIC. Powder Properties Chemical type Polyester TGI... |
 |
Anti-Graffiti Powder Coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Durable powder coating engineered to resist graffiti paints and inks... |
 |
STD 7PPD | WA：+86 132 6275 2056 WEB: std-coatings.com Product Introduction: Chemical Name: N-(1.4-dimethylpentyl)-N'-phenyl-p-phenylenediamine CAS Reg... |
|
|
Pure polyester/TGIC powder coating | Product description This series of products uses saturated polyester resin and TGIC curing agent as the main base material to make thermosetting p... |
Похожие товары
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
