High-Purity Xenon
Product Details
Product Names
Ultra-High Purity Xenon
High-Purity Xenon
Xenon
Purity
Ultra-High Purity Xenon: ≥99.9995%
High-Purity Xenon: ≥99.999%
Impurity Content (ppm)
| Impurity | Ultra-High Purity | High-Purity |
|---|---|---|
| Nitrogen (N₂) | ≤1.5 | ≤2.5 |
| Oxygen (O₂) + Argon (Ar) | ≤0.5 | ≤1.5 |
| Hydrogen (H₂) | ≤0.5 | ≤0.5 |
| Carbon Monoxide (CO) | ≤0.1 | ≤0.2 |
| Carbon Dioxide (CO₂) | ≤0.1 | ≤0.3 |
| Hydrocarbons (CH₄) | ≤0.1 | ≤0.3 |
| Water (H₂O) | ≤1 | ≤2 |
| Krypton (Kr) | ≤1 | ≤2 |
| Dinitrogen Monoxide (N₂O) | ≤0.1 | ≤0.2 |
| Fluoride Content (CxFy) | ≤0.1 | ≤0.5 |
Packaging
Filled in 40L steel cylinders, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Recommended for industrial use; used for filling flash tubes and flash lamps, and as a deep anesthetic.
Physical and Chemical Properties
CAS Number: 7440-63-3.
Physical and Chemical Characteristics: Colorless and odorless inert gas. Insoluble in water. Melting point (℃): -112; Boiling point (℃): -107.1; Relative density (water=1): 3.52 (-109℃); Relative density (air=1): 4.56; Saturation vapor pressure (kPa): 724.54 (-64℃); Flash point (℃): No data; Combustion heat (kJ/mol): 241; Critical temperature (℃): 16.6; Critical pressure (MPa): 5.88; Upper and Lower Explosion Limits (v%): Not applicable; Ignition temperature (℃): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Non-flammable. Remove containers from the fire area if possible. Spray water to keep the containers cool until the fire is out. Evacuate people to the upwind side and isolate the contaminated area. Emergency personnel should wear self-contained positive pressure breathing apparatus and general work clothes. Cut off the leak source if possible. Ensure adequate ventilation to disperse the gas. Handle the leaking container properly, repair and inspect before reuse.
Health Hazards: The hazards to humans are similar to those of argon. Inhalation of a mixture of 70% xenon and oxygen can cause mild anesthesia, with loss of consciousness occurring after about 3 minutes.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
Send product request
Other supplier products
 |
MDF (Medium density fiberboard) powder coating | Introduction Due to the good application prospects and advantages of MDF powder coating technology itself (see attached table), it has long been o... |
 |
High-Temperature Resistant Powder Coating | Product Introduction: High-temperature resistant coatings are typically defined as those whose films do not change color, do not flake off, and ca... |
|
|
Polyester/TGIC Powder Coatings | Feature: -Good bond ability and good mechanical properties -Good overbaking resistance -Excellent weatherability -Good flowing and glossy Fiel... |
 |
Polyester based powder coating MT-JA000G White | Product Description MT-JA000G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent ... |
|
|
Gray Color Hammer Powder Coating | Basic Info. iteminformation Model NO. Hammer Tone Finish Powder Coating Method Spray Main Raw Material Polyester Resin ... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
