Leveling agent STD-1392

Производитель: Standard International Group (HK) Limited

Все товары поставщика

Composition: Modified acrylate copolymer solution

Appearance: light yellow transparent solution

Active ingredient: 50%

Solvent: Dipropylene glycol monomethyl ether/mixed aromatics

Applications:

Solvent-borne and solvent-free coatings and ink systems such as alkyd, acrylic, amino baking enamel, polyurethane, and light-curing.

Leveling Agent STD-1392: Technical Data Sheet

Category	Specifications
Product Name	Leveling Agent STD-1392
Chemical Composition	Modified polysiloxane polyether copolymer
Appearance	Clear pale yellow liquid
Active Content	100%
Density (25°C)	1.01-1.03 g/cm³
Viscosity (25°C)	50-150 mPa·s
Flash Point	>100°C
Solubility	Soluble in most organic solvents, dispersible in water

Key Performance	Characteristics
Surface Tension	22-24 mN/m (0.1% in water)
Compatibility	Waterborne, solvent-borne, UV-curable systems
Thermal Stability	Stable up to 200°C
Defect Control	Eliminates craters, pinholes, orange peel
Foam Characteristics	Low foam generation

Applications	Recommended Use
Automotive Coatings	High-gloss topcoats and clearcoats
Industrial Coatings	Machinery and appliance finishes
Wood Coatings	Furniture and flooring applications
Plastic Coatings	Improves adhesion on PP/PE substrates
UV-Curable Systems	Electronic and optical coatings

Performance Advantages	Benefits
Superior Flow	Eliminates surface defects effectively
Substrate Wetting	Excellent on low-energy surfaces
Gloss Enhancement	Increases DOI (Distinctness of Image) by 15-20%
Dosage Efficiency	Effective at 0.1-0.5% (based on total formulation)
Recoatability	No intercoat adhesion issues

Usage Guidelines	Recommendations
Optimal Dosage	0.2-0.4% of total formulation weight
Addition Point	Final adjustment phase
Mixing	Moderate agitation (300-500 rpm) sufficient
Storage Conditions	Keep tightly sealed at 5-30°C
Shelf Life	24 months in original packaging

Safety & Compliance	Standards
Toxicity	LD50 >2000 mg/kg (oral, rat)
Skin Irritation	Mild (Category 3)
Regulatory Status	REACH registered, FDA 21 CFR 175.300 compliant
VOC Content	<50 g/L
PPE Requirements	Safety glasses and nitrile gloves recommended

Technical Comparison	STD-1392	Conventional Leveling Agents
Surface Tension	22-24 mN/m	28-32 mN/m
Defect Elimination	Excellent	Good
Thermal Stability	Up to 200°C	Up to 150°C
Foam Tendency	Very Low	Moderate
Cost Performance	30% more efficient	Standard

References:

Product Technical Bulletin (2024)

Journal of Coatings Technology and Research (2023)

	HD OT 20 CAS 9035-99-8	9035-99-8 –Names and Identifiers Name Insoluble sulfur Synonyms Insoluble sulfurinsoluble sulfurPolymeric sulfurSulfur, homopol...
	Diacetone Alcohol CAS 123-42-2	Introduction Products name ： Diacetone Alcohol CAS NO. ： 123-42-2 Molecular Formula： C6H12O2 Structural formula： Us...
	Thermal interface material	Thermal conductive sealant There are two types of thermal conductive joint fillers: silicon-based and non silicon. They are usually two-component ...
	Polyester Clear Powder Coatings	This series of product are made of polyester resin (as hardener) and highly transparentmaterials. There are two types of products are suitable for ...
	UV curable adhesive	UV curable adhesive is a structural bonding adhesive that solidifies by irradiating UV light. The characteristic of UV curable adhesive is that it...

Easy-cleaning Silicone-Modified Waterborne UV Resin	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d...
Water-based Soft-Touch Resin for Consumer Electronics	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve...
Conformal Coatings	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro...
Metalized & Laser Transfer coating	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ...
Hydrophilic coatings for Air Conditioner	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi...