Silicone Oil ALFARES-60000

• 

Product description

ALFARES 60000 is a silicone fluid based on straight-chained polydimethylsiloxane fluids.

Applications

• Thermostatic fluids (–50 °C to 200 °C).
• Dielectric fluids (impregnation of paper for condensers).
• Anti-blotting products for photocopying machines.
• Thinning and plastifying agents for RTVs and silicone sealants.
• Lubricating and heat-protecting agents for textile threads (synthetic sewing threads).
• Ingredients in maintenance products (polishes, wax polishes, floor and furniture polishes, etc.).
• Paint additives (anti-cratering, anti-floating/flooding and anti-scratching effects, etc.).
• Water-repellent treatment:
• – of powders (for paints and plastics)
• – of fibres: glass fibres
• Release agents (mould release for plastics and metal castings).
• Surfactants for styrene-butadiene foam.

Typical Properties

• Very good resistance to high and low temperatures.
• Good combustion resistance.
• Good dielectric properties.
• Low surface tension.
• High compressibility.
• Absence of ageing upon exposure to atmospheric agents.
• Good oxidation resistance.
• Little change in viscosity with temperature.
• Good resistance to high and prolonged shear stress.

Storage and handing

When stored in the original unopened packaging at a temperature between –20 °C and 50 °C, products may be stored for up to 2 years from its date of manufacture (expiry date).

Comply with storage instructions and expiry date marked on the packaging, and observe all recommendations made by the Material Safety Data Sheet (MSDS) at all times.

Product safety

The Safety Data Sheet (SDS) should always be read and completely understood prior to handling any chemical product.

It is important that adequate safety procedures are followed by the user.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Другие товары поставщика

	Metallic sand texture matte MT-049/7C130	Introduction No. MT-049/7C130 Color Gray Surface Metallic sand texture matte System Polyester Scope of applicati...
	Polyester based powder coating MT-JA000G White	Product Description MT-JA000G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent ...
	Polyurethane primer STD-927	Product Description The one-component primer can improve the surface condition of the base layer, making it flatter and smoother, providing a good...
	Porcelain bamboo (green) MT-049/94945	Introduction No. MT-049/94945 Color Porcelain bamboo (green) Surface Flat metal System Polyester Scope of applicatio...
	Low temperature environmentally friendly pure polyester/PRIMID powder coating	Product Description This series of products uses saturated polyester resin and Primid curing agent as the main base material to make thermosetting...

Похожие товары

	Easy-cleaning Silicone-Modified Waterborne UV Resin	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d...
	Water-based Soft-Touch Resin for Consumer Electronics	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve...
	Conformal Coatings	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro...
	Metalized & Laser Transfer coating	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ...
	Hydrophilic coatings for Air Conditioner	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi...