Silicone Oil ALFARES-60000

• 

Product description

ALFARES 60000 is a silicone fluid based on straight-chained polydimethylsiloxane fluids.

Applications

• Thermostatic fluids (–50 °C to 200 °C).
• Dielectric fluids (impregnation of paper for condensers).
• Anti-blotting products for photocopying machines.
• Thinning and plastifying agents for RTVs and silicone sealants.
• Lubricating and heat-protecting agents for textile threads (synthetic sewing threads).
• Ingredients in maintenance products (polishes, wax polishes, floor and furniture polishes, etc.).
• Paint additives (anti-cratering, anti-floating/flooding and anti-scratching effects, etc.).
• Water-repellent treatment:
• – of powders (for paints and plastics)
• – of fibres: glass fibres
• Release agents (mould release for plastics and metal castings).
• Surfactants for styrene-butadiene foam.

Typical Properties

• Very good resistance to high and low temperatures.
• Good combustion resistance.
• Good dielectric properties.
• Low surface tension.
• High compressibility.
• Absence of ageing upon exposure to atmospheric agents.
• Good oxidation resistance.
• Little change in viscosity with temperature.
• Good resistance to high and prolonged shear stress.

Storage and handing

When stored in the original unopened packaging at a temperature between –20 °C and 50 °C, products may be stored for up to 2 years from its date of manufacture (expiry date).

Comply with storage instructions and expiry date marked on the packaging, and observe all recommendations made by the Material Safety Data Sheet (MSDS) at all times.

Product safety

The Safety Data Sheet (SDS) should always be read and completely understood prior to handling any chemical product.

It is important that adequate safety procedures are followed by the user.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Other supplier products

	Hardware powder	Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder accor...
	Hyper-durable powder coatings/non stick powder coating	Powder Properties Appearance Smooth Matt Gloss level 20 – 30 gloss units (60°) Particle size Suitable for electrostat...
	Building Materials Super Weather Resistant Powder	Powder characteristics With excellent weather resistance, it not only has the characteristics of environmental protection and super weather resist...
	Nylon (Polyamide) Powder Coatings	We supply a complete range of polyamide (nylon) powder coatings, including Nylon 6, 11, 12, and 1010, designed for demanding applications requiring...
	Highly Anti-Corrosion (Salt Spray Resistant) Powder Series	Key Features & Specifications FeatureSpecification / Benefit Anti-Corrosion Formula Zinc-rich primer + pure polyester coatingfor s...

Same products

	5.4,4'-Oxydiphenol CAS 1965-09-9	Seller: Yufeng International Group Co., Ltd	Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-...
	1,1,2,2-Tetrachloroethane CAS 79-34-5	Seller: Yufeng International Group Co., Ltd	Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te...
	3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9	Seller: Yufeng International Group Co., Ltd	Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,...
	2.1,1,2-Trichloroethane CAS 79-00-5	Seller: Yufeng International Group Co., Ltd	Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-...
	1.1,1,2,2-Tetrachloroethane CAS 79-34-5	Seller: Yufeng International Group Co., Ltd	Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te...