Anodized Powder Coating
Introduction：
It is suitable for anodic oxidation effect for product appearance, as well as environmental protectionrequirements such as Rohs and Reach.
Coating characteristics:
Good adhesion, excellent mechanical properties,tough coating film.
Coating film is Smooth and glossy
Good outdoor endurance
Excellent resistance to excessive baking
Application:
Suitable for a variety of products decoration and protection, such as: aluminum curtain wall, door and window frame, ceiling, etc
Spraying method:
high voltage electrostatic sprayin60-80KV
Recommended filmthickness:
60-80 um
Application parameters
Curing time
200Cx10–15mins
Standard Test Method For Itemizer：
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the performance index of .the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements.
Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re -examined to be in good condition evenif it isfound to be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance commitment of the product application.
The results vary with environmental factors and other conditions.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Kitchen supplies powder coating | Introduction Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not ha... |
 |
Water-dispersible isocyanate curing agent STD 268 | Product Description STD268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyure... |
|
|
Powder coating for automotive trim | Introduction Complete range of products with rich colors Orders can be placed directly according to PANTONG / RAL / architectural color cards Sp... |
 |
Brown Series Powder Coating | Introduction We supply a full range of brown powder coatings—from classic chocolate brown to elegant bronze—direct from our factory in... |
 |
Antimicrobial Powder Coatings | Product performance: long term Up to 4N- 5N (99.99-99 .999%) Application: kitchen utensils: dishwasher, stove, cupboard, etc Household applian... |
